Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 95.00Impact Factor 2024: 0.6
The journal International Shipbuilding Progress (ISP) was founded in 1954. Each year two issues appear (in March and September). Publications submitted to ISP should describe scientific work of high international standards, advancing subjects related to the field of Marine Technology, such as:
- Concept development
- General design of ships and offshore objects
- Ship and offshore structural design
- Hydro-mechanics and -dynamics
- Maritime engineering and machinery systems
- Production processes of all types of ships and other objects intended for marine use
- Production technology and material science
- Shipping science, economics, and all directly related subjects
- Ship operations
- Offshore and ocean engineering in relation to the marine environment
- Marine safety
- Efficiency, lifecycle, and environment
- Ice-related aspects for ships and offshore objects.
The contents of the papers may be of a fundamental or of an applied scientific nature and must be of the highest novelty and rigor.
Authors: Flower, J.O.
Article Type: Research Article
Abstract: A perturbational process is applied to the non-linear rolling of a ship in a sea described by the power spectral density of its waveslope; this produces a formula which is simple to apply. The results indicate that the roll power spectral density is “harder” than that predicted from linear theory which appears to be in keeping with measured data previously published.
DOI: 10.3233/ISP-1976-2326301
Citation: International Shipbuilding Progress, vol. 23, no. 263, pp. 209-212, 1976
Authors: Shaher Sabit, A.
Article Type: Research Article
Abstract: Graphical and analytical methods have been previously provided for the hull surface generation and calculation of the main geometric particulars of the SSPA cargo liner series [1,2]1 1 Numbers in brackets refer to References listed at the end of this paper. . Graphical methods have been presented by the SSPA for the calculation of the resistance and propulsive coefficients of any series form [3,4]. However, certain simplified assumptions were used, the analysis involved extrapolation beyond the limits of the series and corrections due to deviations from the standard LCB position were not given. Numbers in brackets refer …to References listed at the end of this paper. This paper presents the results of the regression analyses performed on the resistance and propulsive coefficients data of the SSPA cargo liner series, which aimed at developing analytical expressions not involving unvalid assumptions and provide the necessary corrections to account for variations in the LCB position from the standard adopted. These regression equations are subsequently used to form a computer program for the calculation of the resistance and propulsive coefficients of any intermediate form within the range of the series, and are compatible with the generated hull forms provided from earlier analysis. Show more
DOI: 10.3233/ISP-1976-2326302
Citation: International Shipbuilding Progress, vol. 23, no. 263, pp. 213-217, 1976
Authors: Oosterveld, M.W.C. | van den Berg, W.
Article Type: Research Article
Abstract: The improvement in performance which can be obtained by application of ducted propellers on bulk carriers and tankers depends very much on, the afterbody-nozzle configuration. Investigations carried out so far on these applications are mostly restricted to isolated cases. In this paper, based on systematic tests performed in the Depressurized Towing Tank of the Netherlands Ship Model Basin, information is given about the influence of nozzle length, nozzle shape, propeller diameter, hull-nozzle clearance and about the influence of adaptation of the nozzle to the wake flow on the performance of large ships.
DOI: 10.3233/ISP-1976-2326303
Citation: International Shipbuilding Progress, vol. 23, no. 263, pp. 218-231, 1976
Authors: Cummings, D.E.
Article Type: Research Article
Abstract: A great deal of effort has been devoted in recent years to study of the deformation of the wake from propeller blades. Relationships between loading, vortex rollup, contraction, and pitch variation have been studied. This paper discusses analytical and experimental developments, and emphasizes the effects on design and performance of high speed high thrust subcavitating propellers.
DOI: 10.3233/ISP-1976-2326304
Citation: International Shipbuilding Progress, vol. 23, no. 263, pp. 232-241, 1976
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl