Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 95.00Impact Factor 2024: 0.6
The journal International Shipbuilding Progress (ISP) was founded in 1954. Each year two issues appear (in March and September). Publications submitted to ISP should describe scientific work of high international standards, advancing subjects related to the field of Marine Technology, such as:
- Concept development
- General design of ships and offshore objects
- Ship and offshore structural design
- Hydro-mechanics and -dynamics
- Maritime engineering and machinery systems
- Production processes of all types of ships and other objects intended for marine use
- Production technology and material science
- Shipping science, economics, and all directly related subjects
- Ship operations
- Offshore and ocean engineering in relation to the marine environment
- Marine safety
- Efficiency, lifecycle, and environment
- Ice-related aspects for ships and offshore objects.
The contents of the papers may be of a fundamental or of an applied scientific nature and must be of the highest novelty and rigor.
Authors: van Gunsteren, L.A. | van Hall, A.F.
Article Type: Research Article
Abstract: The requirements for propeller production are derived from desired hydrodynamic performance and mechanical properties. The usual requirements are shown to be sufficient for low and medium-speed vessels. For high-speed propellers cavitation is the determinant factor which is expected to evoke a trend towards more severe tolerances. An outline of the production process is given. Problem areas are identified. Production concepts are derived, based on the idea that a high-precision casting should be aimed at. The consequences for production methods are elaborated. It is shown that for the production process to be optimum with regard to quality and efficiency, an integration …is needed of mechanisation, computerized information processing and quality control. The proposed production conceptions, which already showed substantial improvements in quality and profitability, have been partly implemented. Show more
DOI: 10.3233/ISP-1971-1819901
Citation: International Shipbuilding Progress, vol. 18, no. 199, pp. 97-114, 1971
Authors: van Oossanen, P.
Article Type: Research Article
Abstract: In this paper some of the findings of an analysis of the experimental results of tests with eight propeller blade-section type profiles in two-dimensional, stationary, non-cavitating and cavitating flow in the large cavitation tunnel of the Netherlands Ship Model Basin are given. A method is developed to determine the more important stationary, two-dimensional profile characteristics in a potential flow and in water for both the non-cavitating and the cavitating cases. In water, the developed method was obtained from the findings of the analysis of the experiments and as such is limited to the flow conditions of those experiments. In this …method three general geometric profile form parameters are used to describe those profile form properties influencing the value of the lift coefficient and maximum pressure coefficient. With this set of general profile parameters a new propeller blade section shaping process may be developed in the form of a limited number of charts or relations valid for every profile form. It is seen that a relatively large radius of curvature of the leading edge of the profile is important in obtaining profile shapes insensitive to cavitation when the profile is subject to a range of incidence angles. Show more
DOI: 10.3233/ISP-1971-1819902
Citation: International Shipbuilding Progress, vol. 18, no. 199, pp. 115-130, 1971
Authors: Kuiper, G.
Article Type: Research Article
Abstract: This paper gives a brief review of the theory of unsteady lifting surfaces as applied to ships’ propellers. The possibilities and limitations of this theory are discussed, together with some results recently obtained by different authors. Mathematical methods of solution and their implications will be avoided wherever possible. The accurate measurement of unsteady forces acting on a propeller is rather difficult. Some investigations have been performed and the results of these are compared with results obtained with the lifting surface theory. Further systematic investigations are necessary and some suggestions for these will be given.
DOI: 10.3233/ISP-1971-1819903
Citation: International Shipbuilding Progress, vol. 18, no. 199, pp. 131-143, 1971
Authors: Forrest, J.
Article Type: Research Article
DOI: 10.3233/ISP-1971-1819904
Citation: International Shipbuilding Progress, vol. 18, no. 199, pp. 144-148, 1971
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl