Abstract: Rectangular wave eddy current testing (RECT), which is performed using a rectangular wave excitation current, can simultaneously obtain multiple datasets. However, the high-frequency harmonic signal detected by the detection coil interferes with the low-frequency signal based on Faraday’s law of induction. The method proposed in this study is a type of electronic bridge, wherein a compensation method is implemented to enhance the low-frequency signal of the RECT using a digital-to-analog converter (DAC). The compensation wave generated by the DAC is determined such that the output signal becomes zero when the probe does not detect any flaws. A 12 mm thick aluminum plate with flat-bottom drill holes on the backside is used as the specimen. The holes have a diameter of 3 mm and depths of 2, 4, and 6 mm, respectively. The results demonstrate that the flaw signal cannot be detected without compensation. However, the flaw signal can be successfully detected around these holes with compensation.
Keywords: Eddy current testing, low frequency, rectangular wave eddy current testing, digital-to-analog converter, electronic bridge
