Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Selected papers from the International Symposium on Applied Electromagnetics and Mechanics - ISEM 2019
Guest editors: Jinhao Qiu, Ke Xiong and Hongli Ji
Article type: Research Article
Authors: Miao, Bingronga; | Yang, Shuwanga | Wang, Mingyuea | Jiang, Chuanyinga | Peng, Qiminga | Luo, Yaoxianga
Affiliations: [a] State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu, China
Correspondence: [*] Corresponding author: Bingrong Miao, State Key Laboratory of Traction Power, Southwest Jiaotong University, Chengdu 610031, China. E-mail: brmiao@home.swjtu.edu.cn
Abstract: The identification effects of different modal parameters (displacement mode, rotation mode, and curvature mode) of the beam structure on structural damage during crack initiation are studied in this paper. Firstly, the displacement mode, the rotation mode and the curvature mode of the two-span simply supported beam are calculated using the vibration response. Secondly, combining the multi-resolution and singularity analysis characteristics of continuous wavelet transform, the wavelet transform coefficients of three modal parameters are calculated to identify the singularity of structural modal parameters. Thirdly, the recognition effects of each method on structural damage are compared by adding different degrees of random noise to the simulation data. The results show that the damage identification methods based on three different modal parameters can locate small-scale structural damage, but the anti-noise performance of each method is different, the anti-noise performance of the rotation mode is the best, the displacement mode is second and the curvature mode is poor. Finally, the experimental data is used to verify the recognition effect of each damage identification method based on different modal parameters on the actual structural damage. The experimental results show that the damage recognition effect of the rotation mode parameters is better, while the displacement mode and the curvature mode parameters are similar, but the curvature mode method is more likely to be interfered at the smaller damage. These analysis results provide a reference for the selection of different damage identification parameters according to the environment and response characteristics in engineering practice.
Keywords: Damage identification, wavelet method, displacement mode, rotation mode, curvature mode
DOI: 10.3233/JAE-209460
Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 64, no. 1-4, pp. 1411-1419, 2020
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl