High power density medium frequency transformer built with thin GO electrical steel sheets

Issue title: 25th Symposium on Electromagnetic Phenomena in Nonlinear Circuits – EPNC 2018

Guest editors: Jean-Philippe Lecointe, Ewa Napieralska and Andrzej Demenko

Article type: Research Article

Authors: Hamdinou, Sidi^a; | Roger, Daniel^a | Rossi, Mathieu^a | Belgrand, Thierry^b

Affiliations: [a] Université Artois, Laboratoire Systèmes Electrotechniques et Environnement, Béthune, France | [b] Thyssenkrupp Electrical Steel, Isbergues, France

Correspondence: [*] Corresponding author: Sidi Hamdinou, Univ. Artois, EA 4025, Laboratoire Systèmes Electrotechniques et Environnement (LSEE), Béthune, France. E-mail: sdhamdinou@gmail.com

Abstract: The paper presents the concept of a medium frequency transformer built with thin grain oriented electrical steel (GOES) sheets and high temperature windings; this transformer will be associated with power converters for building a solid-state transformer (SST) used in DC grids. The aim of the study is to bring answers about the maximum operating frequency and flux density that provide the maximum power density and efficiency. A thermal model built from tests on the prototype is presented. This thermal model gives a prediction of the transformer performance for the initial choices of frequency and flux density. It opens perspectives for designing high power density medium-frequency (MF) transformers.

Keywords: Solid-state transformer (SST), medium frequency power transformer, thermal modeling, grain oriented electrical steel (GOES)

DOI: 10.3233/JAE-209204

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 63, no. 4, pp. 681-689, 2020