Development and validation of a 3D model dedicated to eddy current non-destructive testing of tubes by encircling probes

Issue title: Proceedings of the twelfth International Symposium on Interdisciplinary Electromagnetic, Mechanic and Biomedical Problems, ISEM Bad Gastein

Article type: Research Article

Authors: Reboud, Christophe^{a; *} | Prémel, Denis^a | Pichenot, Grégoire^a | Lesselier, Dominique^b | Bisiaux, Bernard^c

Affiliations: [a] C.E.A Saclay, Bâtiment 611, 91191 Gif-sur-Yvette, France | [b] Laboratoire des Signaux et Systèmes (L2S), Supélec, Gif-sur-Yvette, France | [c] SETVAL – Centre de Recherche VALLOUREC, Aulnoye-Aymeries, France

Correspondence: [*] Corresponding author. Tel.: +33 1 69 08 71 96; Fax: +33 1 69 08 75 97; E-mail: christophe.reboud@cea.fr

Abstract: A numerical model dedicated to the simulation of external eddy current testing (ECT) of tubes from the outer diameter surface has been developed. This paper is focused on the calculation of the primary electric field emitted by a tilted and off-centered encircling probe. Numerical difficulties are overcome by using splines functions for multivariate integration. Final simulation results obtained with the complete numerical model are compared to experimental data in the case of an off-centre probe in conditions close to industrial ones.

Keywords: Non-destructive testing, encircling probe, tilt and eccentricity, splines functions

DOI: 10.3233/JAE-2007-869

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 25, no. 1-4, pp. 313-317, 2007