Journal of Intelligent & Fuzzy Systems - Volume 39, issue 5

Authors: Tolga, A. Cagri | Basar, Murat

Article Type: Research Article

Abstract: Increasing population in the world drives people to find a different type of feeding regime. Even if there is an immense augmentation in crowd brilliant innovators are looking for new ways of farming more efficiently. Hydroponics is one of the novel paths that is a planting system without soil. The system reduces water usage by 95% and with the same rate provides efficiency in the crop, furthermore, sustainability is highly supplied. Traditional smart farming applied in the rural area strains immense transportation and brokership costs. In these days innovators make smart agriculture in vessel containers. Especially vertical and smart farming …made in the suburban area of the cities offers new opportunities on vegetables’ abundance. In this paper, the efficiency of this offered system is examined with minimizing the investment cost data. The system itself and the investment area have abounded with myriad uncertainties. Fuzzy logic tackles with those vaguenesses and fuzzy Evaluation Based on Distance from Average Solution (EDAS) method supplies assistance in the decision-making process of system evaluation. In addition, TODIM (a risk sensitive iterative multi-criteria decision making method based on Prospect Theory) is employed to check the evaluation of those three alternatives and to monitor how risk perception affects decision processes. A micro-based application is performed and attractive results are achieved. Show more

Keywords: Vertical urban agriculture, fuzzy EDAS method, fuzzy TODIM, investment cost, smart farming

DOI: 10.3233/JIFS-189100

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6325-6337, 2020

Authors: Çakır, Esra | Ulukan, Ziya

Article Type: Research Article

Abstract: Due to the increase in energy demand, many countries suffer from energy poverty because of insufficient and expensive energy supply. Plans to use alternative power like nuclear power for electricity generation are being revived among developing countries. Decisions for installation of power plants need to be based on careful assessment of future energy supply and demand, economic and financial implications and requirements for technology transfer. Since the problem involves many vague parameters, a fuzzy model should be an appropriate approach for dealing with this problem. This study develops a Fuzzy Multi-Objective Linear Programming (FMOLP) model for solving the nuclear power …plant installation problem in fuzzy environment. FMOLP approach is recommended for cases where the objective functions are imprecise and can only be stated within a certain threshold level. The proposed model attempts to minimize total duration time, total cost and maximize the total crash time of the installation project. By using FMOLP, the weighted additive technique can also be applied in order to transform the model into Fuzzy Multiple Weighted-Objective Linear Programming (FMWOLP) to control the objective values such that all decision makers target on each criterion can be met. The optimum solution with the achievement level for both of the models (FMOLP and FMWOLP) are compared with each other. FMWOLP results in better performance as the overall degree of satisfaction depends on the weight given to the objective functions. A numerical example demonstrates the feasibility of applying the proposed models to nuclear power plant installation problem. Show more

Keywords: Project management, nearest interval approximation method, goal programming, fuzzy multi-objective linear programming, nuclear power plant

DOI: 10.3233/JIFS-189101

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6339-6350, 2020

Authors: Alcalde, Cristina | Burusco, Ana

Article Type: Research Article

Abstract: Information extracted from L-fuzzy contexts is substantially improved by taking into account different points of view, which can roughly be represented by criteria. This work addresses the general study of L-fuzzy contexts were a set of criteria is introduced, analyzing situations in which their evolution over time is known. The relationship among criteria is also an important point in the study. In this sense, the treatment will vary depending on whether they are independent criteria or there exists dependency among them. Of special importance will be those elements that stand out for presenting a positive temporal evolution. Four algorithms are …proposed in order to analyze the different situations. Finally, the applicability of the results is shown thought an example where the opinion of the clients of several hotels is analyzed taking into account both the type of traveler considered and the different aspects of the establishments on which a score is given. Show more

Keywords: L-fuzzy concept analysis, L-fuzzy context sequences, L-fuzzy contexts associated with criteria, WOWA operators, Choquet integrals

DOI: 10.3233/JIFS-189102

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6351-6362, 2020

Authors: Büyüközkan, Gülçin | Mukul, Esin

Article Type: Research Article

Abstract: Smart health applications are raising a growing interest around the world thanks to its potential to act proactively and solve health related problems with smart technologies. Smart health technologies can provide effective healthcare services such as personalization of treatments through big data, robotics in cure and care, artificial intelligence support to doctors, etc. The mixed structure of the evaluation of smart health technologies involves various contradictory criteria. However, when information is of uncertain nature, it is difficult to decide on how to treat. A hesitant fuzzy linguistic term set (HFLTS) approach is applied to overcome such uncertainties related to this …multi-criteria decision-making (MCDM) problem. This approach can be used to facilitate experts’ decision-making processes in complex and uncertain situations. In this study, an integrated hesitant fuzzy linguistic (HFL) MCDM approach is proposed to evaluate smart health technologies. The criteria are weighted with HFL Analytic Hierarchy Process (AHP), and then, smart health technologies are evaluated with the HFL Combinative Distance-based Assessment (CODAS) method. A comparative analysis with HFL COPRAS and HFL TOPSIS is applied. Lastly, the potential of this approach is presented through a case study. Show more

Keywords: Hesitant fuzzy linguistic term set, multi-criteria decision making, smart health, smart health technologies

DOI: 10.3233/JIFS-189103

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6363-6375, 2020

Authors: Barbara, Gładysz | Dorota, Kuchta

Article Type: Research Article

Abstract: The paper is based on a survey analyzing the success of IT projects in Poland as function of the cooperation with different stakeholders. The project’s participants expressed their subjective opinions on the effectiveness of the collective cooperation with various stakeholder groups. The impact of cooperation with different stakeholder groups: project team, management of the project implementation unit, suppliers and end users of the final product on the success of the project is examined. To this end, intuitionistic fuzzy sets, a correlation coefficient of intuitionistic fuzzy sets and an original method of intuitionistic fuzzy regression are applied. The conclusions point to …the most important stakeholder groups for the complete success and for the avoidance of a complete failure of IT projects. Some possibilities of the extension of the proposed method are indicated, so that the decision maker can adopt it to his or her preferences in searching for project success or failure factors. Show more

Keywords: IT Project Management, IT project success, project stakeholder, intuitionistic fuzzy set, intuitionistic correlation, intuitionistic regression

DOI: 10.3233/JIFS-189104

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6377-6389, 2020

Authors: Kalender, Zeynep Tugce | Kilic, Huseyin Selcuk | Tuzkaya, Gulfem | Dascioglu, Busra Gulnihan

Article Type: Research Article

Abstract: The prevalence of environmental studies in the academy has increased in recent years, depending on the adverse effects of global warming on natural resources. Besides various environmentally benign applications, one of the most important instruments on eliminating the negative environmental effects of an increasing population is electric vehicles. There are various topics within the concept of electric vehicles, including the determination of electric vehicle type, routing, network design, and so on. However, in this study, determining the locations of electric charging stations is the main focus. The problem is handled as a multi-criteria decision-making problem with the consideration of the …uncertainties in the decision-making environment. Specifically, the judgments of decision-makers play a critical role in the success of decisions, but for a decision-maker, it is usually difficult to express his/her preferences by using only one linguistic term due to the structure of some criteria type. Hence, with the proposed methodology, in this study, criteria are firstly classified as fuzzy and crisp according to their objective or subjective characteristics. Afterwards, besides the utilization of classic techniques for crisp type criteria, probabilistic linguistic terms sets are utilized for fuzzy type criteria with an extended version of TOPSIS. The proposed methodology is used for the comparison of 39 alternative electric charging locations in Istanbul, which is one of the most crowded cities in Europe. Show more

Keywords: Electric charging stations, plug-in electric vehicles, parking-lot-based charging location, TOPSIS, multi-criteria decision-making, probabilistic linguistic term sets

DOI: 10.3233/JIFS-189105

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6391-6406, 2020

Authors: Ilbahar, Esra | Cebi, Selcuk | Kahraman, Cengiz

Article Type: Research Article

Abstract: Effective utilization of renewable energy sources is an essential component of countries’ sustainable development strategies. A thorough evaluation of renewable energy alternatives is required to assure maximum exploitation of resources. The evaluation of renewable energy sources is a complicated problem since many criteria, even some of them are conflicting, must be taken into account simultaneously. Pythagorean fuzzy sets are better able to reflect uncertainty and vagueness in an assessment process by providing a greater domain for decision makers to describe their opinions. Therefore, this study aims at prioritizing renewable energy alternatives by employing interval-valued Pythagorean fuzzy WASPAS method. The obtained …results are compared to the results of intuitionistic type-2 fuzzy WASPAS, interval-valued intuitionistic fuzzy WASPAS and crisp WASPAS methods. Biomass is selected to be the best renewable energy alternative for Central Anatolia Region of Turkey. Show more

Keywords: Renewable energy evaluation, Pythagorean fuzzy sets, WASPAS

DOI: 10.3233/JIFS-189106

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6407-6417, 2020

Authors: Marcek, Dusan

Article Type: Research Article

Abstract: To forecast time series data, two methodological frameworks of statistical and computational intelligence modelling are considered. The statistical methodological approach is based on the theory of invertible ARIMA (Auto-Regressive Integrated Moving Average) models with Maximum Likelihood (ML) estimating method. As a competitive tool to statistical forecasting models, we use the popular classic neural network (NN) of perceptron type. To train NN, the Back-Propagation (BP) algorithm and heuristics like genetic and micro-genetic algorithm (GA and MGA) are implemented on the large data set. A comparative analysis of selected learning methods is performed and evaluated. From performed experiments we find that the …optimal population size will likely be 20 with the lowest training time from all NN trained by the evolutionary algorithms, while the prediction accuracy level is lesser, but still acceptable by managers. Show more

Keywords: ARIMA models, neural networks, learning algorithms, time series forecasting

DOI: 10.3233/JIFS-189107

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6419-6430, 2020

Authors: Haktanır, Elif

Article Type: Research Article

Abstract: Malcolm Baldrige National Quality Award (MBNQA) is a quality assessment and rewarding system that aims to increase the awareness of quality management. Although the award is launched in the USA in 1989 and only given to the U.S based companies, it is recognized internationally. There are 7 types of categories in the award system (Leadership, Strategic planning, Customer focus, Measurement, analysis, and knowledge management, Workforce focus, Process management, and Results) where the evaluation is made over 1000 points and each category has its own weight. Since almost all the publications in the literature are based on crisp measurements and evaluations …of the system performances, we proposed a multi attribute decision making (MADM) method using interval valued Pythagorean fuzzy weighted averaging (IVPFWA) and interval valued Pythagorean fuzzy weighted geometric (IVPFWG) aggregation operators for MBNQA assessment to represent the decision makers’ subjective evaluations better. A comparison of the results with Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method and an illustrative example are presented in the study. Show more

Keywords: Malcolm Baldrige National Quality Award, interval-valued Pythagorean fuzzy sets, multi attribute decision making, interval-valued Pythagorean fuzzy aggregation operators

DOI: 10.3233/JIFS-189108

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6431-6441, 2020

Authors: Piltan, Farzin | Prosvirin, Alexander E. | Kim, Jong-Myon

Article Type: Research Article

Abstract: Robotic manipulators represent a class of nonlinear and multiple-degrees-of-freedom robots that have pronounced coupling effects and can be used in various applications. The challenge of understanding complexity in a system’s dynamic behavior, coupling effects, and sources of uncertainty presents substantial challenges regarding fault estimation, detection, identification, and tolerant-control (FEDIT) in a robot manipulator. Thus, a proposed active fault-tolerant control algorithm, based on an adaptive modern sliding mode observer, is represented. Due to the effect of the system’s complexities and uncertainties for fault estimation, detection, and identification (FEDI), a sliding mode observer (SMO) is proposed. To address the sliding mode observer …drawbacks for FEDI such as high-frequency oscillation (chattering) and fault estimation accuracy, the modern (T-S fuzzy higher order) technique is represented. In addition, the adaptive technique is applied to the modern sliding mode observer (MSMO) to self-tune the coefficients of the fault estimation observer to increase the reliability and robustness of decision-making for diagnosis of the fault. Next, the residual delivered by the adaptive MSMO (AMSMO) is split into windows, and each window is characterized by a numerical parameter. Finally, the machine learning technique known as a decision tree adaptively derives the threshold values that are used for problems of fault detection and fault identification in this work. Due to control of the effective fault, a surface automated new sliding mode controller (SANSMC) is presented in this work. To address the challenge of chattering and unlimited uncertainties (faults), the AMSMO is applied to the sliding mode controller (SMC). In addition, the surface-automated technique is used to fine-tune the surface coefficient to reduce the chattering and faults in the robot manipulator. The results show that the machine learning-based automated robust hybrid observer significantly improves the robustness, reliability, and accuracy of FEDIT in unknown conditions. Show more

Keywords: Robot manipulator, sliding mode algorithm, observation technique, fuzzy logic technique, high-order sliding mode observer, adaptive technique, fault estimation, fault detection, fault identification, fault-tolerant control.

DOI: 10.3233/JIFS-189109

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6443-6463, 2020

Authors: Ercan-Teksen, Hatice | Anagün, Ahmet Sermet

Article Type: Research Article

Abstract: Control chart is one of the statistical methods to analyze the process. The use of fuzzy sets in control charts, which are divided into qualitative and quantitative data, has been applied in many studies recently. Especially for qualitative control charts, data collection is more difficult and more subjective. Therefore, fuzzy sets are used to reduce losses in data. There are many control chart studies created by type-1 fuzzy sets available in the literature. In recent years, examples of fuzzy control charts with extensions of fuzzy sets have been found. The aim of this study is to obtain c-control chart for …intuitionistic fuzzy sets. For this purpose, defuzzification and likelihood methods are used. In particular, with the application of the likelihood method to intuitionistic fuzzy control charts, this will be considered as a pioneering study in the literature. In addition, a novel likelihood method was developed for intuitionistic fuzzy sets and used here to provide flexibility. Show more

Keywords: Intuitionistic fuzzy sets, fuzzy control charts, intuitionistic fuzzy comparison methods

DOI: 10.3233/JIFS-189110

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6465-6473, 2020

Authors: Karadayi-Usta, Saliha | Bozdag, Cafer Erhan

Article Type: Research Article

Abstract: Medical tourism service offers a professional healthcare opportunity by travelling abroad with the chance of touristic and cultural activities at the destination country. Medical travelers prefer a foreign country for treatment due to long waiting periods, high costs, excessive number of patients, inadequate number of healthcare professionals and inadequate cutting-edge technological equipment at their country of residence. An assistance company (AC) is a legal requirement to support medical tourists in Turkey during the treatment period, and offers alternative healthcare service providers (HSPs) that are public hospitals, private hospitals and private clinics at the first phase of the medical tourism service. …Moreover, there are specific HSPs certificated by the government, and a few number of public hospitals authenticated for medical tourism. By taking the whole above statements into consideration, HSP selection is a key decision-making point differentiating from a traditional hospital selection of a patient. Medical tourists must evaluate various criteria in order to select a proper HSP. Additionally, these decision criteria are often vague, complex, indeterminate and inconsistent information in the HSP type decision. Hence, in this study, a decision making model based on neutrosophic fuzzy sets considering HSP selection in every aspect (truthiness, indeterminacy and falsity) is suggested. Show more

Keywords: Neutrosophic fuzzy sets, decision making, medical tourists, healthcare service provider type selection

DOI: 10.3233/JIFS-189111

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6475-6485, 2020

Authors: Kalaycı, Tolga Ahmet | Asan, Umut

Article Type: Research Article

Abstract: A frequently encountered case in developing a classification model is the presence of embedded clusters, formed by data used for training. A good example for this case may be the differences in purchasing styles of e-commerce customers in a purchase propensity modelling problem. While some customers prefer a detailed research about prices, functionalities and comments, some others may need a shorter examination to make a purchase decision. Although feeding such cluster information into the classification model has been shown by recent studies to improve the prediction performance, this valuable information has been largely ignored in classical modeling techniques in general …and neural networks in particular. This paper proposes a feedforward neural network regularization method which incorporates cluster information into networks’hidden nodes. Within the forward propagation and backpropagation calculations of the network, a non-randomized matrix is used to assign hidden nodes to different observation clusters. This matrix manipulates the activation value of a hidden node for each observation in line with the observation’s membership degree to the cluster that the node is assigned to. Also, through the alternating use of randomized binary and non-randomized matrices within iterations, the proposed method successfully fulfills the regularization task. Experiments were performed for different settings and network architectures. Empirical results demonstrate that the proposed method works well in practice and performs statistically significantly better than existing alternatives. Show more

Keywords: Neural networks, fuzzy clustering, classification, regularization, machine learning

DOI: 10.3233/JIFS-189112

Citation: Journal of Intelligent &Fuzzy Systems, vol. 39, no. 5, pp. 6487-6496, 2020

Authors: Goker, Nazli | Dursun, Mehtap | Albayrak, Esra

Article Type: Research Article

Abstract: Supply chain agility is an indispensable way for the companies to quickly response to the demands of the customers. For this reason, agility of supply chain is indispensable in dynamic markets that have high scale of diversity and subjective needs. Supply chain agility needs a systemic procedure that gives priority to feedbacks of customers and follows the changes of competitors in the sector. An efficient supplier evaluation procedure is indispensable for reaching supply chain agility. Agile supplier selection needs to take into account various criteria that incorporate vagueness and uncertainty, obtaining general a multiple level hierarchical system that allows conducting …a more efficient decision analysis. Thus, in this paper an integrated fuzzy multi-criteria group decision making procedure based on quantifier-guided ordered weighted average (OWA) method and fuzzy integral, which allows incorporating uncertain data expressed as linguistic terms into the analysis, is proposed for identifying the most suitable agile supplier alternative. In group decision making issues, aggregating experts’opinions is vital to achieve more robust results. As quantifier-guided OWA method is appropriate for decision making problems under uncertain environments, it is employed for the aggregation of experts’evaluations. The developed decision procedure is illustrated via a case study performed in a dye producer in Turkish dye sector. Show more

Keywords: Imprecise data, agile supplier selection, fuzzy measure, quantifier-guided OWA, fuzzy integral

DOI: 10.3233/JIFS-189113

Citation: Journal of Intelligent &Fuzzy Systems, vol. 39, no. 5, pp. 6497-6505, 2020

Authors: Kahraman, Cengiz | Boltürk, Eda | Onar, Sezi Cevik | Oztaysi, Basar

Article Type: Research Article

Abstract: Pythagorean fuzzy sets (PFS) are an extension of intuitionistic fuzzy sets introduced by Atanassov [1 ]. PFSs have the advantage of providing larger domains for assigning membership and non-membership degrees satisfying that their squared sum is at most equal to one. PFS have been often used in modeling the problems under vagueness and impreciseness in order to better define the problems together with the hesitancy of decision makers. Different human emotions and behaviors can be modeled in humanoid robots (HR) by fuzzy sets. In this paper, facial expressions of a humanoid robot are modeled depending on the degrees of the …emotions. Larger degree of emotion causes a stronger indicator of the facial mimic. Show more

Keywords: Fuzzy sets, extensions, intuitionistic fuzzy sets, Pythagorean fuzzy sets, picture fuzzy sets, q-rung orthopair fuzzy sets, spherical fuzzy sets

DOI: 10.3233/JIFS-189114

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6507-6515, 2020

Authors: Caglayan, Nadide | Satoglu, Sule Itir | Kapukaya, E. Nisa

Article Type: Research Article

Abstract: Sales forecasting with high accuracy is crucial in many industries. Especially, in fast-moving consumer goods, retail and apparel industries, the products are not tailor-made and must be produced and made available in chain stores to the customers, in advance. Therefore, for sales and operations planning, forecast information is required. However, traditionally, time series based forecasting techniques are used that merely consider the seasonality, trend, auto-regressive and cyclic factors. This type of forecasting is not suitable especially in cases where many other factors involved and affect the product sales. In apparel retail industry, special factors such as promotions, special days, weather …(temperature), and location of the store may affect the product demands of the chain stores. The unique aspect of this study is that the sales of a product family of the fashion retail chain stores were estimated by means of artificial neural networks, for the first time in the literature. Besides, in this study, new significant factors in forecasting were explored that influence the demand of the chain stores. So, in this study, artificial neural networks are developed and used for sales forecasting of a product family of a real chain store, in Turkey. The stores exist in many cities, and some of the cities have much more stores than the other cities. The city with the highest number of stores was selected and some of the stores in this city chosen among them. The past sales, sales price and promotion data of selected stores are used. In addition, store information, number of customers visiting the store, and weather temperature data are included in the model. Sales are estimated by artificial neural networks. Besides, Regression Analysis was used for forecasting and the results of both techniques were compared. As a result of the study, the most appropriate network structure has been obtained, and a high sales forecasting performance has been reached. Show more

Keywords: Artificial neural networks, data analysis, demand forecasting, retail sectors

DOI: 10.3233/JIFS-189115

Citation: Journal of Intelligent &Fuzzy Systems, vol. 39, no. 5, pp. 6517-6528, 2020

Authors: Dogan, Onur | Oztaysi, Basar

Article Type: Research Article

Abstract: Customer-based practices enable benefits to organizations in a contentious business. Offering individualized proposals increase customer loyalty to be able to afloat. Understanding customers is a vital difficulty to perform personalized recommendations. As a demographic feature, gender information essentially cannot be captured by human tracking technologies. Hence, several procedures are improved to predict undiscovered gender information. In the research, the followed indoor paths in a shopping mall are used to predict customer genders using fuzzy c-medoids, one of the soft clustering techniques. A Levenshtein-based fuzzy classification methodology is proposed the followed paths as string data. Although some studies focused on gender …prediction, no research has centered on path-oriented. The novelty of the investigation is to analyze customer path data for the gender classes. Show more

Keywords: Gender prediction, string classification, soft clustering, path classification, levenshtein, fuzzy c-medoids

DOI: 10.3233/JIFS-189116

Citation: Journal of Intelligent &Fuzzy Systems, vol. 39, no. 5, pp. 6529-6538, 2020

Authors: Ömerali, Mete | Kaya, Tolga

Article Type: Research Article

Abstract: Since decades managers and scientists have been investigating the vertical boundaries of the firms to understand when to buy goods and services or make them internally. Since there are number of pros and cons on making or buying, the decision is very complex. Firms not only focus on the tangible terms like transaction costs and economies of scale but also consider other factors like information asymmetry, know-how protection and data source quality to keep or gain competitive advantage. Yet this isn’t simple enough, with the rapid growth of technology, the fourth industry revolution and digitalization challenge firms even further. Deciding …on digitalization strategy isn’t anywhere different than the existing make buy decision that firms have faced in the past, however this time with an increased complexity. In this article, we are aiming to understand what strategies firms should apply during their journey in industry 4.0 and a verification with an industrial case study. The purpose of this study is to suggest a Type-2 Fuzzy COPRAS methodology to aid the buy or implement decisions of firms in IOT domain. Show more

Keywords: Internet of Things, Type-2 Fuzzy COPRAS, Digitalization, Industry 4.0, Make or Buy

DOI: 10.3233/JIFS-189117

Citation: Journal of Intelligent &Fuzzy Systems, vol. 39, no. 5, pp. 6539-6552, 2020

Authors: Bolturk, Eda | Gülbay, Murat | Kahraman, Cengiz

Article Type: Research Article

Abstract: Sustainable energy selection has been a very popular problem among the researchers and various models including deterministic, probabilistic and fuzzy approaches have been developed for the solution of this problem. Fuzzy approaches to sustainable energy selection problems have been often handled in the literature. Aggregation operators for multi-expert decision making problems are an alternative solution technique for multi criteria decision making problems. Since neutrosophic and intuitionistic fuzzy aggregation operators are comparable extensions of ordinary fuzzy sets, they have been employed to aggregate multi-expert judgments. An illustrative energy selection problem is presented, solved by two approaches, and results are compared. The …same linguistic data have been used for the comparison purpose. Show more

Keywords: Fuzzy aggregation operator, multi-attribute decision making, intuitionistic fuzzy set, neutrosophic fuzzy sets, sustainable energy selection

DOI: 10.3233/JIFS-189118

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6553-6563, 2020

Authors: Jahanandish, Roya | Khosravifard, Amir | Vatankhah, Ramin

Article Type: Research Article

Abstract: This paper proposes a new method to improve fuzzy control performance accuracy in the stabilization of the two-axis gimbal system. To this end, due to the fact that the knowledge of the accurate behavior of the system plays a substantial role in fuzzy control performance, all the uncertain parameters of the dynamic model such as friction, mass imbalance and moments of inertia are estimated prior to the controller design and without imposing any computational burden on the control scheme. To estimate the uncertainties and disturbances which exist in the dynamic equations, an identification process formulated as an inverse problem is …utilized, and the Gauss– Newton method is adopted for the optimization process. Regarding the severe sensitivity of inverse problems to measurement errors, this undesirable effect is reduced by using a proper smoothing technique. In order to increase the accuracy of the final results, a novel procedure for calculation of the sensitivity coefficients of the inverse problem is proposed. This procedure is based on the direct differentiation of the governing equations with respect to the unknown parameters. At the end, simulation results are presented to confirm the effectiveness of the proposed scheme. Show more

Keywords: Fuzzy control, parameter estimation, two-axis gimbal

DOI: 10.3233/JIFS-189119

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6565-6577, 2020

Authors: Çağlıyor, Sandy | Öztayşi, Başar | Sezgin, Selime

Article Type: Research Article

Abstract: The motion picture industry is one of the largest industries worldwide and has significant importance in the global economy. Considering the high stakes and high risks in the industry, forecast models and decision support systems are gaining importance. Several attempts have been made to estimate the theatrical performance of a movie before or at the early stages of its release. Nevertheless, these models are mostly used for predicting domestic performances and the industry still struggles to predict box office performances in overseas markets. In this study, the aim is to design a forecast model using different machine learning algorithms to …estimate the theatrical success of US movies in Turkey. From various sources, a dataset of 1559 movies is constructed. Firstly, independent variables are grouped as pre-release, distributor type, and international distribution based on their characteristic. The number of attendances is discretized into three classes. Four popular machine learning algorithms, artificial neural networks, decision tree regression and gradient boosting tree and random forest are employed, and the impact of each group is observed by compared by the performance models. Then the number of target classes is increased into five and eight and results are compared with the previously developed models in the literature. Show more

Keywords: Machine learning algorithms, motion picture industry, forecasting

DOI: 10.3233/JIFS-189120

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6579-6590, 2020

Authors: Haktanır, Elif | Kahraman, Cengiz

Article Type: Research Article

Abstract: Failure mode and effects analysis (FMEA) is a structured approach for discovering possible failures that may occur in the design of a product or process. Since classical FMEA is not sufficient to represent the vagueness and impreciseness in human decisions and evaluations, many extensions of ordinary fuzzy sets such as hesitant fuzzy sets, intuitionistic fuzzy sets, Pythagorean fuzzy sets, spherical fuzzy sets, and picture fuzzy sets. Classical FMEA has been handled to capture the uncertainty through these extensions. Neutrosophic sets is a different extension from the others handling the uncertainty parameters independently. A novel interval-valued neutrosophic FMEA method is developed …in this study. The proposed method is presented in several steps with its application to an automotive company in order to prioritize the potential causes of failures during the design process by considering multi-experts’ evaluations. Show more

Keywords: Failure mode and effect analysis, interval valued neutrosophic sets, risk priority number

DOI: 10.3233/JIFS-189121

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6591-6601, 2020

Authors: Yildiz, Didem | Temur, Gul T. | Beskese, Ahmet | Bozbura, F. Tunc

Article Type: Research Article

Abstract: In contemporary business life, retention of talented employees is crucial for organizations to preserve created value. Considering their attitudes, behaviors and personality, millenials are different from former generations, and retaining them requires a distinct management approach. This study aims to provide the decision makers with a more effective and efficient tool for evaluating career management activity types leading to employee retention of millenials. A novel method, Spherical Fuzzy Analytic Hierarchy Process (SFAHP) is used in the study to; (i) define the importance levels of the criteria having impact on employee retention, and (ii) assess various career management activity types for …employee retention. To ensure the practical use of the model, a numerical example from real world is presented. The results indicate that “leadership and management” is the most important factor, and “development-oriented career management activities” is the highest impact activity type in increasing the employee retention. Show more

Keywords: Employee retention, millenials, multi criteria decision making, spherical fuzzy sets, spherical fuzzy analytic hierarchy process, talent management

DOI: 10.3233/JIFS-189122

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6603-6618, 2020

Authors: Tekin, Ahmet Tezcan | Çebi, Ferhan

Article Type: Research Article

Abstract: Within the most productive route, online travel agencies (OTAs) intend to use advanced digital media ads to expand their piece of the industry as a whole. The metasearch engine platforms are among the most consistently used digital media environments by OTAs. Most OTAs offer day by day deals in metasearch engine platforms that are paying per click for each hotel to get reservations. The administration of offering methodologies is critical along these lines to reduce costs and increase revenue for online travel agencies. In this study, we tried to predict both the number of impressions and the regular Click-Through-Rate (CTR) …level of hotel advertising for each hotel and the daily sales amount. A significant commitment of our research is to use an extended dataset generated by integrating the most informative features implemented in various related studies as the rolling average for a different amount of day and shifted values for use in the proposed test stage for CTR, impression and sales prediction. The data is created in this study by one of Turkey’s largest OTA, and we are giving OTA’s a genuine application. The results at each prediction stage show that enriching the training data with the OTA-specific additional features, which are the most insightful and sliding window techniques, improves the prediction models ’ generalization capability, and tree-based boosting algorithms carry out the greatest results on this problem. Clustering the dataset according to its specifications also improves the results of the predictions. Show more

Keywords: CTR prediction, impression prediction, sales prediction, data enrichment, clustering, fuzzy clustering

DOI: 10.3233/JIFS-189123

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6619-6627, 2020

Authors: Kılıç, Hakan | Kabak, Özgür

Article Type: Research Article

Abstract: Human development and competitiveness have a causal relation. However, the literature is not clear on which one affects the other. This study investigates the bilateral relation between human development and competitiveness. For this purpose, initially, Fuzzy Analytic Network Process (FANP) is utilized to develop a composite index based on the relative importance weights of respective human development and competitiveness drivers. By FANP, the effects of key dimensions of human development and indexes of competitiveness on each other are taken into account. Subsequently, countries’ efficiencies on converting their human development to competitiveness and inversely, competitiveness to human development is measured by …Data Envelopment Analysis (DEA). Two different DEA models are developed to consider the bilateral relations. 45 countries are evaluated using both FANP and DEA models. Finally, the results are synthesized to reveal the direction of the relationship. It is found that the effect of competitiveness on human development is more significant than the effect of human development on competitiveness. Show more

Keywords: Human development, competitiveness of nations, fuzzy analytic network process, data envelopment analysis

DOI: 10.3233/JIFS-189124

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6629-6643, 2020

Authors: Dursun, Mehtap | Goker, Nazli | Mutlu, Hakan

Article Type: Research Article

Abstract: Organizations make use of project management methodologies, which provide an effective manner to achieve managerial goals, maintain the strength of the companies in increasing competition. Efficiency in planning, budgeting, and scheduling are provided so that high quality outputs are obtained through these processes. Agile project management methodology, which has been emerged from unpredictability of customer requirements and changeable business environment, is apt to cope with the failures of traditional project management tools. Besides, lean six-sigma project management methodology has become a combination of lean and six-sigma, which were opponent methodologies previously. This paper aims to determine the most suitable outsourcing …provider alternative by presenting a novel cognitive maps-based intuitionistic fuzzy decision making procedure. Interrelationships among evaluation criteria are weighted employing intuitionistic fuzzy cognitive map technique because of the causal links among evaluation criteria, vagueness, fuzziness, and hesitation in data. Moreover, the most appropriate provider alternative for both agile and lean six-sigma project management methodologies is identified by utilizing intuitionistic fuzzy TOPSIS method, which aims for minimizing the closeness to the ideal solution while maximizing the distance from the anti-ideal solution in hesitative environment. The case study is carried out in a bank that performs in Turkish banking sector. Show more

Keywords: Intuitionistic fuzzy sets, intuitionistic fuzzy cognitive map, IFTOPSIS, outsourcing provider selection, project management, agile, lean six-sigma

DOI: 10.3233/JIFS-189125

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6645-6655, 2020

Authors: Oner, Mahir | Ustundag, Alp

Article Type: Research Article

Abstract: Since information science and communication technologies had improved significantly, data volumes had expanded. As a result of that situation, advanced pre-processing and analysis of collected data became a crucial topic for extracting meaningful patterns hidden in the data. Therefore, traditional machine learning algorithms generally fail to gather satisfactory results when analyzing complex data. The main reason of this situation is the difficulty of capturing multiple characteristics of the high dimensional data. Within this scope, ensemble learning enables the integration of diversified single models to produce weak predictive results. The final combination is generally achieved by various voting schemes. On the …other hand, if a large amount of single models are utilized, voting mechanism cannot be able to combine these results. At this point, Deep Learning (DL) provides the combination of the ensemble results in a considerable time. Apart from previous studies, we determine various predictive models in order to forecast the outcome of two different case studies. Consequently, data cleaning and feature selection are conducted in advance and three predictive models are defined to be combined. DL based integration is applied substituted for voting mechanism. The weak predictive results are fused based on Recurrent Neural Network (RNN) and Long Short Term Memory (LSTM) using different parameters and datasets and best predictors are extracted. After that, different experimental combinations are evaluated for gathering better prediction results. For comparison, grouped individual results (clusters) with proper parameters are compared with DL based ensemble results. Show more

Keywords: Ensemble learning, deep neural networks, LSTM, deep ensemble learning

DOI: 10.3233/JIFS-189126

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6657-6668, 2020

Article Type: Other

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6669-6669, 2020

Authors: Barrón-Romero, César | Hernández-Zavala, Antonio

Article Type: Research Article

Abstract: Fuzzy processors are used for control actions in nonlinear mechatronic systems where high processing speed is required. The Field Programmable Gate Arrays (FPGA) are a good option to implement low cost fuzzy hardware in a short development time. A very important block in fuzzy hardware is the fuzzifier, since it affects directly in the accuracy of the result and in the processing time for obtaining a fuzzy number. There have been many design methodologies intended for enhancing the performance of this block. This paper presents a parallel fuzzifier circuit called α -BSSF. Its main design characteristics are the use of …α -levels for membership representation, usage of integer numbers, and avoiding time-consuming operations. As result, we obtained a fuzzifier that shows advantages in the reduction of the response time and computational resources against the existing sequential fuzzification methods. This proposal is targeted not only for T1FS, but also for T2FS, since the membership calculation through fuzzifier is applied in the same way but twice. Show more

Keywords: Digital Circuit design, Fuzzy hardware, Fuzzifier, FPGA, α - levels

DOI: 10.3233/JIFS-190291

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6671-6685, 2020

Authors: Gao, Fei | Zhang, An | Bi, Wenhao

Article Type: Research Article

Abstract: Weapon system operational effectiveness evaluation is of significant importance to weapon system development, and it can be viewed as a multiple criteria decision-making problem with qualitative information, precise data, interval data, and even missing information. Furthermore, due to the complexity of weapon systems and military operations, using prior knowledge such as experiment data, simulation data, and experts’ knowledge could enhance the accuracy and reliability of the evaluation result. To this end, by introducing interval-valued evidential reasoning (ER) approach into belief rule-based system (BRBS), this paper proposed an interval-valued BRB inference method for weapon system operational effectiveness evaluation Firstly, the operational …effectiveness evaluation hierarchy is established based on the analysis of the weapon system. Then, the belief rule base (BRB) is constructed to capture prior knowledge of the weapon system. Next, different kinds of information are transformed into belief distribution, and the proposed interval-valued BRB inference method is applied to relay the input to the BRB and obtain the evaluation result. Finally, three numerical examples of missile system operational effectiveness evaluation with interval data, precise data, and missing information are conducted to illustrate the process of the proposed method and demonstrate its feasibility. Show more

Keywords: Weapon system, operational effectiveness evaluation, belief rule-based system, interval data, evidential reasoning approach

DOI: 10.3233/JIFS-190651

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6687-6701, 2020

Authors: Riaz, Muhammad | Naeem, Khalid | Aslam, Muhammad | Afzal, Deeba | Almahdi, Fuad Ali Ahmed | Jamal, Sajjad Shaukat

Article Type: Research Article

Abstract: Pythagorean fuzzy set (PFS) introduced by Yager (2013) is the extension of intuitionistic fuzzy set (IFS) introduced by Atanassov (1983). PFS is also known as IFS of type-2. Pythagorean fuzzy soft set (PFSS), introduced by Peng et al. (2015) and later studied by Guleria and Bajaj (2019) and Naeem et al. (2019), are very helpful in representing vague information that occurs in real world circumstances. In this article, we introduce the notion of Pythagorean fuzzy soft topology (PFS-topology) defined on Pythagorean fuzzy soft set (PFSS). We define PFS-basis, PFS-subspace, PFS-interior, PFS-closure and boundary of PFSS. We introduce Pythagorean fuzzy soft …separation axioms, Pythagorean fuzzy soft regular and normal spaces. Furthermore, we present an application of PFSSs to multiple criteria group decision making (MCGDM) using choice value method in the real world problems which yields the optimum results for investment in the stock exchange. We also render an application of PFS-topology in medical diagnosis using TOPSIS (Technique for Order Preference by Similarity to an Ideal Solution). The applications are accompanied by Algorithms, flow charts and statistical diagrams. Show more

Keywords: PFS-topology, stock exchange investment, choice value method, medical diagnosis, TOPSIS

DOI: 10.3233/JIFS-190854

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6703-6720, 2020

Authors: Wu, Nannan | Xu, Yejun | Xu, Lizhong | Wang, Huimin

Article Type: Research Article

Abstract: Conflict of environmental sustainable development as a common phenomenon can be seen everywhere in life. To capture consensus problems of decision makers (DMs) in conflict, a consensus and non-consensus fuzzy preference relation (FPR) matrix is proposed to the framework of the Graph Model for Conflict Resolution (GMCR). Concentrating on the case of two DMs within GMCR paradigm, four standard fuzzy solution concepts are developed into eight fuzzy stability definitions which can fully represent DMs’ behavior characteristics of win-win and self-interested. To demonstrate how the novel GMCR methodology proposed in this paper can be conveniently utilized in practice, it is then …applied to an environmental sustainable development conflict with two DMs. The results show that the general fuzzy equilibrium solutions are the intersection of consensus fuzzy equilibrium and non-consensus fuzzy equilibrium. Therefore, the GMCR technique considering DMs’ consensus can effectively predict the various possible solutions of conflict development under different DMs’ behavior preferences and provide new insights for analysts into a conflict. Show more

Keywords: Graph model for conflict resolution, consensus, fuzzy preferences, sustainable development

DOI: 10.3233/JIFS-190990

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6721-6731, 2020

Authors: Zhang, Zeliang

Article Type: Research Article

Abstract: Artificial intelligence technology has been applied very well in big data analysis such as data classification. In this paper, the application of the support vector machine (SVM) method from machine learning in the problem of multi-classification was analyzed. In order to improve the classification performance, an improved one-to-one SVM multi-classification method was creatively designed by combining SVM with the K-nearest neighbor (KNN) method. Then the method was tested using UCI public data set, Statlog statistical data set and actual data. The results showed that the overall classification accuracy of the one-to-many SVM, one-to-one SVM and improved one-to-one SVM were 72.5%, …77.25% and 91.5% respectively in the classification of UCI publication data set and Statlog statistical data set, and the total classification accuracy of the neural network, decision tree, basic one-to-one SVM, directed acyclic graph improved one-to-one SVM and fuzzy decision method improved one-to-one SVM and improved one-to-one SVM proposed in this study was 83.98%, 84.55%, 74.07%, 81.5%, 82.68% and 92.9% respectively in the classification of fault data of transformer, which demonstrated the improved one-to-one SVM had good reliability. This study provides some theoretical bases for the application of methods such as machine learning in big data analysis. Show more

Keywords: Machine learning, big data, artificial intelligence, support vector machine, data classification

DOI: 10.3233/JIFS-191265

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6733-6740, 2020

Authors: Liu, Zhimin | Qu, Shaojian | Wu, Zhong | Ji, Ying

Article Type: Research Article

Abstract: The problem of the optimal three-level location allocation of transfer center, processing factory and distribution center for supply chain network under uncertain transportation cost and customer demand are studied. We establish a two-stage fuzzy 0-1 mixed integer optimization model, by considering the uncertainty of the supply chain. Given the complexity of the model, this paper proposes a modified hybrid second order particle swarm optimization algorithm (MHSO-PSO) to solve the resulting model, yielding the optimal location and maximal expected return of supply chain simultaneously. A case study of clothing supply chain in Shanghai of China is then presented to investigate the …specific influence of uncertainties on the transfer center, clothing factory and distribution center three-level location. Moreover, we compare the MHSO-PSO with hybrid particle swarm optimization algorithm and hybrid genetic algorithm, to validate the proposed algorithm based on the computational time and the convergence rate. Show more

Keywords: Two-stage fuzzy 0-1 mixed integer optimization, three-level location allocation, uncertainty, algorithm

DOI: 10.3233/JIFS-191453

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6741-6756, 2020

Authors: Mu, Yashuang | Wang, Lidong | Liu, Xiaodong

Article Type: Research Article

Abstract: Fuzzy decision trees are one of the most popular extensions of decision trees for symbolic knowledge acquisition by fuzzy representation. Among the majority of fuzzy decision trees learning methods, the number of fuzzy partitions is given in advance, that is, there are the same amount of fuzzy items utilized in each condition attribute. In this study, a dynamic programming-based partition criterion for fuzzy items is designed in the framework of fuzzy decision tree induction. The proposed criterion applies an improved dynamic programming algorithm used in scheduling problems to establish an optimal number of fuzzy items for each condition attribute. Then, …based on these fuzzy partitions, a fuzzy decision tree is constructed in a top-down recursive way. A comparative analysis using several traditional decision trees verify the feasibility of the proposed dynamic programming based fuzzy partition criterion. Furthermore, under the same framework of fuzzy decision trees, the proposed fuzzy partition solution can obtain a higher classification accuracy than some cases with the same amount of fuzzy items. Show more

Keywords: Fuzzy decision trees, Fuzzy partition, Dynamic programming, Fuzzy items

DOI: 10.3233/JIFS-191497

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6757-6772, 2020

Authors: Thakran, Snekha

Article Type: Research Article

Abstract: The Electrocardiogram (ECG) signal records the electrical activity of the heart. It is very difficult for physicians to analyze the ECG signal if noise is embedded during acquisition to inspect the heart’s condition. The denoising of electrocardiogram signals based on the genetic particle filter algorithm(GPFA) using fuzzy thresholding and ensemble empirical mode decomposition (EEMD) is proposed in this paper, which efficiently removes noise from the ECG signal. This paper proposes a two-phase scheme for eliminating noise from the ECG signal. In the first phase, the noisy signal is decomposed into a true intrinsic mode function (IMFs) with the help of …EEMD. EEMD is better than EMD because it removes the mode-mixing effect. In the second phase, IMFs which are corrupted by noise is obtained by using spectral flatness of each IMF and fuzzy thresholding. The corrupted IMFs are filtered using a GPF method to remove the noise. Then, the signal is reconstructed with the processed IMFs to get the de-noised ECG. The proposed algorithm is analyzed for a different local hospital database, and it gives better root mean square error and signal to noise ratio than other existing techniques (Wavelet transform (WT), EMD, Particle filter(PF) based method, extreme-point symmetric mode decomposition with Nonlocal Means(ESMD-NLM), and discrete wavelet with Savitzky-Golay(DW-SG) filter). Show more

Keywords: Genetic particle filter algorithm, ensemble empirical mode decomposition, fuzzy thresholding, ECG denoising

DOI: 10.3233/JIFS-191518

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6773-6782, 2020

Authors: Subbiah, Siva Sankari | Chinnappan, Jayakumar

Article Type: Research Article

Abstract: The load forecasting is the significant task carried out by the electricity providing utility companies for estimating the future electricity load. The proper planning, scheduling, functioning, and maintenance of the power system rely on the accurate forecasting of the electricity load. In this paper, the clustering-based filter feature selection is proposed for assisting the forecasting models in improving the short term load forecasting performance. The Recurrent Neural Network based Long Short Term Memory (LSTM) is developed for forecasting the short term load and compared against Multilayer Perceptron (MLP), Radial Basis Function (RBF), Support Vector Regression (SVR) and Random Forest (RF). …The performance of the forecasting model is improved by reducing the curse of dimensionality using filter feature selection such as Fast Correlation Based Filter (FCBF), Mutual Information (MI), and RReliefF. The clustering is utilized to group the similar load patterns and eliminate the outliers. The feature selection identifies the relevant features related to the load by taking samples from each cluster. To show the generality, the proposed model is experimented by using two different datasets from European countries. The result shows that the forecasting models with selected features produce better performance especially the LSTM with RReliefF outperformed other models. Show more

Keywords: Load forecasting, feature selection, clustering, deep learning, long short term memory

DOI: 10.3233/JIFS-191568

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6783-6800, 2020

Authors: Kejia, Shen | Parvin, Hamid | Qasem, Sultan Noman | Tuan, Bui Anh | Pho, Kim-Hung

Article Type: Research Article

Abstract: Intrusion Detection Systems (IDS) are designed to provide security into computer networks. Different classification models such as Support Vector Machine (SVM) has been successfully applied on the network data. Meanwhile, the extension or improvement of the current models using prototype selection simultaneous with their training phase is crucial due to the serious inefficacies during training (i.e. learning overhead). This paper introduces an improved model for prototype selection. Applying proposed prototype selection along with SVM classification model increases attack discovery rate. In this article, we use fuzzy rough sets theory (FRST) for prototype selection to enhance SVM in intrusion detection. Testing …and evaluation of the proposed IDS have been mainly performed on NSL-KDD dataset as a refined version of KDD-CUP99. Experimentations indicate that the proposed IDS outperforms the basic and simple IDSs and modern IDSs in terms of precision, recall, and accuracy rate. Show more

Keywords: SVM, data selection, feature selection, fuzzy rough set theory, ids

DOI: 10.3233/JIFS-191621

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6801-6817, 2020

Authors: Lei, Fan | Wei, Guiwu | Wu, Jiang | Wei, Cun | Guo, Yanfeng

Article Type: Research Article

Abstract: Probabilistic uncertain linguistic sets (PULTSs) have extensively been employed in multiple attribute group decision making (MAGDM)problem. The QUALIFLEX method, which is relatively a novel MAGDM technique, aims to obtain the optimal alternative. This paper proposes the probabilistic uncertain linguistic QUALIFLEX (PUL-QUALIFLEX) method with CRITIC method. To show the effectiveness of the designed method, an application is given for green supplier selection and the derived results are compared with some existing methods. Thus, the advantage of this proposed method is that it is simple to understand and easy to compute. The proposed method can also contribute to the selection of suitable …alternative successfully in other selection issues. Show more

Keywords: Multiple attribute group decision making (MAGDM), probabilistic uncertain linguistic term sets (PULTSs), CRITIC method, QUALIFLEX method, green supplier selection

DOI: 10.3233/JIFS-191737

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6819-6831, 2020

Authors: Ye, Fei-Fei | Wang, Suhui | Yang, Long-Hao | Wang, Ying-Ming

Article Type: Research Article

Abstract: Air pollution management is becoming a major topic of political concern, and many studies have devoted to the efficiency measurement of air pollution management. However, several drawbacks must be overcome for better applying efficiency measurement to improve air pollution management, including neglect of the importance of different indicators, non-integrity of indicator information for efficiency measurement, and lack of analyzing regional factors in the efficiency of air pollution management. Accordingly, by utilizing the evidential reasoning (ER) approach with entropy weighting method to propose an ER-based indicator integration and introducing the slacks-based measure (SBM) model with consideration of undesirable outputs and the …regression model to propose an SBM-based efficiency analysis, a new air pollution management method, called integrated ER-SBM method, is developed in the present study. In the case study of Chinese 29 provinces, the application procedure and results are provided to illustrate how to apply the integrated ER-SBM method to integrate various air pollution indicators with different importance and further analyze the influence of regional factors, such as technological innovation, regional population density, import-export values, number of industries, and energy resources, on the efficiency of air pollution management. In addition, the policy recommendations targeting the results are concluded as well. Show more

Keywords: Air pollution, indicator integration, efficiency analysis, ER approach, SBM model

DOI: 10.3233/JIFS-191816

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6833-6848, 2020

Authors: Atmaca, S.

Article Type: Research Article

Abstract: In this manuscript, it is aimed to convert the topology on a set X which is on a nearness approximation space to new set families via indiscernibility relation. Then, if the open sets of the present topology are defined as the set of related elements, the set families, which have weakly related elements, will be obtained. Finally, the topological properties and concepts that these new families hold will be examined.

Keywords: Near set, near topology, topology

DOI: 10.3233/JIFS-191922

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6849-6855, 2020

Authors: Adhikary, Krishnendu | Roy, Jagannath | Kar, Samarjit

Article Type: Research Article

Abstract: Due to increasing difficulty and challenging issues of newsboy problem under uncertainty, managers seek newer and appropriate approaches to apprehend more accurately the demand for perishable products and or the products having a short shelf life. This paper investigates a newsboy problem with fuzzy random demand in a single product business scenario. The classical newsboy model is extended to a fuzzy random newsboy problem to determine the optimal order quantity and expected profit under hybrid uncertainty. To solve the proposed model, a new solution approach based on chance constraint programming is proposed to formulate the crisp equivalent form of the …fuzzy random newsboy model. Numerical examples and a real-life case study are presented to show the utility of the projected model. From the outcomes, decision makers can make comprehensive recommendations for the optimal order quantity and expected profit obtained by our proposed model under two-folded uncertainty. Also, a sensitivity analysis suggests that the profit and order quantity will increase (or decrease) with the increase (or decrease) of the mean demand. Show more

Keywords: Newsboy problem, uncertain demand, fuzzy random variable, expected value model

DOI: 10.3233/JIFS-192057

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6857-6868, 2020

Authors: Alsulami, S. H. | Ibedou, Ismail | Abbas, S. E.

Article Type: Research Article

Abstract: In this paper, we join the notion of fuzzy ideal to the notion of fuzzy approximation space to define the notion of fuzzy ideal approximation spaces. We introduce the fuzzy ideal approximation interior operator int Φ λ and the fuzzy ideal approximation closure operator cl Φ λ , and moreover, we define the fuzzy ideal approximation preinterior operator p int Φ λ and the fuzzy ideal approximation preclosure operator p cl Φ λ with respect …to that fuzzy ideal defined on the fuzzy approximation space (X , R ) associated with some fuzzy set λ  ∈ I X . Also, we define fuzzy separation axioms, fuzzy connectedness and fuzzy compactness in fuzzy approximation spaces and in fuzzy ideal approximation spaces as well, and prove the implications in between. Show more

Keywords: Fuzzy rough set, Fuzzy ideal approximation space, Fuzzy separation axioms, Fuzzy connectedness, Fuzzy compactness, 03E72, 03E02, 54C10, 03E20, 54D05, 54D10, 54D30)

DOI: 10.3233/JIFS-192072

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6869-6880, 2020

Authors: Wang, Jie | Yan, Linhuang | Tian, Jiayi | Yuan, Minmin

Article Type: Research Article

Abstract: In this paper, a bilateral spectrogram filtering (BSF)-based optimally modified log-spectral amplitude (OMLSA) estimator for single-channel speech enhancement is proposed, which can significantly improve the performance of OMLSA, especially in highly non-stationary noise environments, by taking advantage of bilateral filtering (BF), a widely used technology in image and visual processing, to preprocess the spectrogram of the noisy speech. BSF is capable of not only sharpening details, removing unwanted textures or background noise from the noisy speech spectrogram, but also preserving edges when considering a speech spectrogram as an image. The a posteriori signal-to-noise ratio (SNR) of OMLSA algorithm is …estimated after applying BSF to the noisy speech. Besides, in order to reduce computing costs, a fast and accurate BF is adopted to reduce the algorithm complexity O (1) for each time-frequency bin. Finally, the proposed algorithm is compared with the original OMLSA and other classic denoising methods using various types of noise with different signal-to-noise ratios in terms of objective evaluation metrics such as segmental signal-to-noise ratio improvement and perceptual evaluation of speech quality. The results show the validity of the improved BSF-based OMLSA algorithm. Show more

Keywords: Speech enhancement, bilateral filtering, optimally modified log-spectral amplitude, bilateral spectrogram filtering, spectrogram

DOI: 10.3233/JIFS-192088

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6881-6889, 2020

Authors: Oketch, Godrick | Karaman, Filiz

Article Type: Research Article

Abstract: Count data models are based on definite counts of events as dependent variables. But there are practical situations in which these counts may fail to be specific and are seen as imprecise. In this paper, an assumption that heaped data points are fuzzy is used as a way of identifying counts that are not definite since heaping can result from imprecisely reported counts. Because it is practically unlikely to report all counts in an entire dataset as imprecise, this paper proposes a likelihood function that not only considers both precise and imprecisely reported counts but also incorporates α  - cuts …of fuzzy numbers with the aim of varying impreciseness of fuzzy reported counts. The proposed model is then illustrated through a smoking cessation study data that attempts to identify factors associated with the number of cigarettes smoked in a month. Through the real data illustration and a simulation study, it is shown that the proposed model performs better in predicting the outcome counts especially when the imprecision of the fuzzy points in a dataset are increased. The results also show that inclusion of α  - cuts makes it possible to identify better models, a feature that was not previously possible. Show more

Keywords: Fuzzy α - cuts, fuzzy count data, fuzzy likelihood function, fuzzy probability, heaped data, poisson regression

DOI: 10.3233/JIFS-192094

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6891-6901, 2020

Authors: Riaz, Muhammad | Hamid, Muhammad Tahir | Athar Farid, Hafiz Muhammad | Afzal, Deeba

Article Type: Research Article

Abstract: In this article, we study some concepts related to q-rung orthopair fuzzy soft sets (q-ROFSSs) together with their algebraic structure. We present operations on q-ROFSSs and their specific properties and elaborate them with real-life examples and tabular representations to develop an influx of linguistic variables based on q-rung orthopair fuzzy soft (q-ROFS) information. We present an application of q-ROFSSs to multi-criteria group decision-making (MCGDM) process related to the university choice, accompanied by algorithm and flowchart. We develop q-ROFS TOPSIS method and q-ROFS VIKOR method as extensions of TOPSIS (a technique for ordering preference through the ideal solution) and VIKOR (Vlse …Kriterijumska Optimizacija Kompromisno Resenje), respectively. Finally, we tackle a problem of construction utilizing q-ROFS TOPSIS and q-ROFS VIKOR methods. Show more

Keywords: q-ROFNs, TOPSIS, aggregation operators, VIKOR, soft sets

DOI: 10.3233/JIFS-192175

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6903-6917, 2020

Authors: Guo, Xingru | Liu, Aijun | Li, Xia | Liu, Taoning

Article Type: Research Article

Abstract: Rh-negative rare blood inventory protection plays an important role in emergency blood protection. Normally, hospitals typically hold a fixed amount of daily reserve in response to emergency needs, but the measure can increase the unnecessary cost of repeated freezing and thawing. In order to save manpower, protect blood resources and reduce costs, a two-stage stochastic model is proposed to determine the optimal daily reserve of Rh-negative red blood cells, taking into account the uncertainty of demand. First, the model focuses on minimizing operational cost, shortage cost and damage caused by blood substitution. Then, the proposed model generates a series of …discrete scenarios to solve the uncertainty of demand and predict the demand. In addition, a case study is presented to prove the validity of the proposed model with real data. Sensitivity analysis is also established to observe the effect of parameter changes on the results. Finally, the results show that the proposed model can effectively reduce the cost and current waste. Show more

Keywords: Rh-negative, red blood cells, inventory management, stochastic demand, two-stage stochastic model

DOI: 10.3233/JIFS-192182

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6919-6933, 2020

Authors: Lee, Chang-Yong

Article Type: Research Article

Abstract: Under a flexible mass-production system, a manufacturer may need to provide highly customized products to meet customer satisfaction. It is likely that components in a customized product are correlated in such a way that the demands of some components depend on those of others. In order to cope with dependence in the demands, we proposed a continuous review multi-item inventory (Q , r ) model that included a general form of correlation and dependence in demands among components. We represented the proposed model by using a probabilistic graphical model under the assumption that the demands of all components and their …correlations were represented by a multivariate Gaussian probability distribution. By taking an advantage of a directed acyclic graph and its topological order, we demonstrated that the correlated demands among components in the proposed model could be solved without any approximation and assumption. As an illustration of the proposed method, we solved an inventory (Q , r ) model of eight correlated components and discussed the experimental results in terms of correlation and dependence in demand. Show more

Keywords: Inventory, continuous review multi-item inventory, directed acyclic graph, topological order, correlation and dependence

DOI: 10.3233/JIFS-200014

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6935-6947, 2020

Authors: Barlak, Damla

Article Type: Research Article

Abstract: In this study, we introduce the concepts of φ λ ,μ -double statistically convergence of order β in fuzzy sequences and strongly λ - double Cesaro summable of order β for sequences of fuzzy numbers. Also we give some inclusion theorems.

Keywords: Statistical convergence, Cesàro summability, Modulus function, 40A05, 40A25, 40A30, 40C05, 03E72

DOI: 10.3233/JIFS-200039

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6949-6954, 2020

Authors: Zhang, Nian | Han, Yunpeng | Si, Quanshen | Wei, Guiwu

Article Type: Research Article

Abstract: To consider the decision makers’ regret behavior and describe the hybrid evolution information in the risk decision-making problem, a new approach is proposed based on regret theory in this paper. Firstly, the probable value of different states are calculated by Pignistic probability transformation method. Secondly, the relative closeness formula of hybrid information are established and the utility values of alternatives are computed. Then, decision makers’ utility values are obtained according to the regret theory. Moreover, the overall perceived utility values of alternatives are obtained by weighted arithmetic mean and got the optimal one by the ranking order. Finally, an numerical …example is illustrated the method and comparative analysis are offered between the proposed approach and other existed methods to show that is feasible and usable. Show more

Keywords: Regret theory, hybrid information, multi-attribute risk decision-making

DOI: 10.3233/JIFS-200081

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6955-6964, 2020

Authors: Zhang, Xianquan | Yang, Ju | Dong, Yu | Yu, Chunqiang | Tang, Zhenjun

Article Type: Research Article

Abstract: Most data hiding methods have limitations in resisting cropping and noise attacks. Aiming at this problem, a robust data hiding with multiple backups and optimized reference matrix is proposed in this paper. Specifically, secret data is divided into a set of groups and multiple backups of each group data are generated according to the number of backups. The cover image is divided into several blocks. A reference matrix is constructed by four constraints to assist data hiding and data extraction. The proposed method aims to extract exactly at least one backup of each group data so that the correct backups …can construct the secret data well if the stego-image is corrupted. Experimental results show that the proposed algorithm is robust to cropping and noise attacks. Show more

Keywords: Data hiding, anti-cropping, anti-noise, multi-backup data, data security

DOI: 10.3233/JIFS-200089

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6965-6977, 2020

Authors: El Atik, Abd El Fattah A. | wahba, Ashgan S.

Article Type: Research Article

Abstract: Rough set theory is used in simple directed graphs to study nano topology. Adjacent vertices was used in digraphs only to define their neighborhoods. Four types of neighborhood systems for vertices are introduced in this article which depend on both adjacent vertices and associated edges. Additionally, the generalization of some notions presented by Pawlak and Lellis Thivagar and some of their properties are investigated. Finally, we present a new model of a blood circulation system of the human heart based on blood paths. Also, different kinds of topological separation axioms are presented and studied between vertices and edges of the …heart blood circulation model. Show more

Keywords: Graph theory, Rough sets, Nano topology, Human heart, Separation axioms

DOI: 10.3233/JIFS-200126

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6979-6992, 2020

Authors: Han, Lu | Su, Zhi | Lin, Jing

Article Type: Research Article

Abstract: Ever increasing ordinal variables are being collected by the Personal Credit Reference System in China, however this system suffers from analysis of this kind of data, which cannot be calculated by Euclidean distance. In this study, we put forward a hybrid KNN algorithm based on Sugeno measure, and we prove that the error of this algorithm is smaller than that of Euclidean distance, furthermore, we use real data obtained from the Personal Credit Reference System to perform experiments and get the user’s initial portrait. Through the comparisons with Kmeans algorithm and other different distance measures in KNN algorithm, we find …that the hybrid KNN algorithm is more suitable for clustering personal credit data. Show more

Keywords: Hybrid KNN clustering, personal credit reference system, Sugeno measure, user’s portrait

DOI: 10.3233/JIFS-200191

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 6993-7004, 2020

Authors: Zhu, Zhanlong | Liu, Yongjun | Wang, Yuan

Article Type: Research Article

Abstract: Adding spatial penalty to fuzzy C-means (FCM) model is an important way to reduce the influence of noise in image segmentation. However, these improved algorithms easily cause segmentation failures when the image has the characteristics of unequal cluster sizes. Besides, they often fall into local optimal solutions if the initial cluster centers are improper. This paper presents a noise robust hybrid algorithm for segmenting image with unequal cluster sizes based on chaotic crow search algorithm and improved fuzzy c-means to overcome the above defects. Firstly, each size of clusters is integrated into the objective function of noise detecting fuzzy c-means …algorithm (NDFCM), which can reduces the contribution of larger clusters to objective function and then the new membership degree and cluster centers are deduced. Secondly, a new expression called compactness, representing the pixel distribution of each cluster, is introduced into the iteration process of clustering. Thirdly, we use two- paths to seek the optimal solutions in each step of iteration: one path is produced by the chaotic crow search algorithm and the other is originated by gradient method. Furthermore, the better solutions of the two-paths go to next generation until the end of the iteration. Finally, the experiments on the synthetic and non–destructive testing (NDT) images show that the proposed algorithm behaves well in noise robustness and segmentation performance. Show more

Keywords: Image segmentation, fuzzy clustering, chaotic crow search algorithm, unequal cluster sizes

DOI: 10.3233/JIFS-200197

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7005-7020, 2020

Authors: Li, Feng

Article Type: Research Article

Abstract: Mining maximal frequent patterns is significant in many fields, but the mining efficiency is often low. The bottleneck lies in too many candidate subgraphs and extensive subgraph isomorphism tests. In this paper we propose an efficient mining algorithm. There are two key ideas behind the proposed methods. The first is to divide each edge of every certain graph (converted from equivalent uncertain graph) and build search tree, avoiding too many candidate subgraphs. The second is to search the tree built in the first step in order, avoiding extensive subgraph isomorphism tests. The evaluation of our approach demonstrates the significant cost …savings with respect to the state-of-the-art approach not only on the real-world datasets as well as on synthetic uncertain graph databases. Show more

Keywords: Uncertain graph, maximal frequent pattern, data mining

DOI: 10.3233/JIFS-200237

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7021-7033, 2020

Authors: Parsa, Navid | Bahmani-Firouzi, Bahman | Niknam, Taher

Article Type: Research Article

Abstract: Distribution automation is well recognized as an effective solution to enhance the reliability and efficiency of these grids in a timely manner. This paper introduces an effective probabilistic operation framework for the automated distribution networks (ADNs) incorporating the plug-in electric vehicles (PEVs) charging/discharging schemes in the presence of different renewable energy sources (RESs). To this end, this paper pursues four different strategic approaches. Firstly, an effective fuzzy based probabilistic method is proposed to model the forecast error in the wind and solar units well as the load demand through the cloud theory. Secondly, an appropriate framework is devised to model …the PEVs random behaviour considering their essential parameters such as the charging/discharging rate and arrival/departure time to/from the parking lots (PLs), the discharging level at driving mode on the road and the effects of battery degradation. As the third goal, an appropriate objective function which can consider automation indices including the social welfare and reliability is considered. Since the operation problem is a nonlinear continuous non-numerical problem, it requires an applicable and effective optimization algorithm which is regarded as the fourth goal of this paper. In this regard, a new θ -modified bat algorithm is introduced to find the optimal solution of the problem. The proposed model is simulated and examined on the IEEE 69-bus standard test system wherein results reveal the effectiveness and applicability of the proposed operation management framework. Show more

Keywords: Automated distribution networks, reliability, electric vehicles, renewable energy sources, optimization and operation management

DOI: 10.3233/JIFS-200246

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7035-7051, 2020

Authors: Saini, Jagriti | Dutta, Maitreyee | Marques, Gonçalo

Article Type: Research Article

Abstract: Indoor air pollution (IAP) has become a serious concern for developing countries around the world. As human beings spend most of their time indoors, pollution exposure causes a significant impact on their health and well-being. Long term exposure to particulate matter (PM) leads to the risk of chronic health issues such as respiratory disease, lung cancer, cardiovascular disease. In India, around 200 million people use fuel for cooking and heating needs; out of which 0.4% use biogas; 0.1% electricity; 1.5% lignite, coal or charcoal; 2.9% kerosene; 8.9% cow dung cake; 28.6% liquified petroleum gas and 49% use firewood. Almost 70% …of the Indian population lives in rural areas, and 80% of those households rely on biomass fuels for routine needs. With 1.3 million deaths per year, poor air quality is the second largest killer in India. Forecasting of indoor air quality (IAQ) can guide building occupants to take prompt actions for ventilation and management on useful time. This paper proposes prediction of IAQ using Keras optimizers and compares their prediction performance. The model is trained using real-time data collected from a cafeteria in the Chandigarh city using IoT sensor network. The main contribution of this paper is to provide a comparative study on the implementation of seven Keras Optimizers for IAQ prediction. The results show that SGD optimizer outperforms other optimizers to ensure adequate and reliable predictions with mean square error = 0.19, mean absolute error = 0.34, root mean square error = 0.43, R2 score = 0.999555, mean absolute percentage error = 1.21665%, and accuracy = 98.87%. Show more

Keywords: Indoor air quality, pollutants, prediction system, optimizers

DOI: 10.3233/JIFS-200259

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7053-7069, 2020

Authors: Zhao, Ruirui | Luo, Minxia | Li, Shenggang

Article Type: Research Article

Abstract: The theory of single valued neutrosophic sets, which is a generalization of intuitionistic fuzzy sets, is more capable of dealing with inconsistent information in practice. In this paper, we propose reverse triple I method under single valued neutrosophic environment. Firstly, we give the definitions of single valued neutrosophic t-representation t-norms and single valued neutrosophic residual implications. Secondly, we develop a formula for calculating single valued neutrosophic residual implications. Then we propose reverse triple I method based on left-continuous single valued neutrosophic t-representation t-norms and its solutions. Lastly, we discuss the robustness of reverse triple I method based on the proposed …similarity measure. Show more

Keywords: Single valued neutrosophic sets, similarity measure, reverse triple I method

DOI: 10.3233/JIFS-200265

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7071-7083, 2020

Authors: Liu, Shuqi | Shao, Mingwen | Liu, Xinping

Article Type: Research Article

Abstract: In recent years, deep neural networks have made significant progress in image classification, object detection and face recognition. However, they still have the problem of misclassification when facing adversarial examples. In order to address security issue and improve the robustness of the neural network, we propose a novel defense network based on generative adversarial network (GAN). The distribution of clean - and adversarial examples are matched to solve the mentioned problem. This guides the network to remove invisible noise accurately, and restore the adversarial example to a clean example to achieve the effect of defense. In addition, in order to …maintain the classification accuracy of clean examples and improve the fidelity of neural network, we input clean examples into proposed network for denoising. Our method can effectively remove the noise of the adversarial examples, so that the denoised adversarial examples can be correctly classified. In this paper, extensive experiments are conducted on five benchmark datasets, namely MNIST, Fashion-MNIST, CIFAR10, CIFAR100 and ImageNet. Moreover, six mainstream attack methods are adopted to test the robustness of our defense method including FGSM, PGD, MIM, JSMA, CW and Deep-Fool. Results show that our method has strong defensive capabilities against the tested attack methods, which confirms the effectiveness of the proposed method. Show more

Keywords: Deep neural network, generative adversarial network, adversarial example, defense

DOI: 10.3233/JIFS-200280

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7085-7095, 2020

Authors: Nasr Saleh, Hayel | Imdad, Mohammad | Khan, Idrees | Hasanuzzaman, Md

Article Type: Research Article

Abstract: In the present article, inspired by the work of Jleli et al. [J. Inequal. Appl. 2014, 38 (2014)] and [J. Inequal. Appl. 2014, 439 (2014)] in metric spaces, we proposed a new class of contractive mappings termed as: fuzzy Θ f -contractive mappings by using an auxiliary function Θ f  : (0, 1) → (0, 1) satisfying suitable properties. This class has further been weakened by defining the class of fuzzy Θ f -weak contractive mappings to realize yet another class of contractive mappings. Thereafter, these two newly introduced classes of contractive mappings are utilized to establish some fixed point …theorems in M -complete fuzzy metric spaces (in the sense of George and Veeramani). In support of our newly obtained results, we provide some examples besides furnishing applications to dynamic programming. Show more

Keywords: Fixed point, fuzzy Θf-contractive mappings, fuzzy Θf-weak contractive mappings, fuzzy metric space, dynamic programming

DOI: 10.3233/JIFS-200319

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7097-7106, 2020

Authors: Chuanchao, Zhang

Article Type: Research Article

Abstract: In view of the characteristics with big data, high feature dimension, and dynamic for a large-scale intuitionistic fuzzy information systems, this paper integrates intuitionistic fuzzy rough sets and generalized dynamic sampling theory, proposes a generalized attribute reduction algorithm based on similarity relation of intuitionistic fuzzy rough sets and dynamic reduction. It uses dynamic reduction sampling theory to divide a big data set into small data sets and relative positive domain cardinality instead of dependency degree as decision-making condition, and obtains reduction attributes of big intuitionistic fuzzy decision information systems, and achieves the goal of extracting key features and fault diagnosis. …The innovation of this paper is that it integrates generalized dynamic reduction and intuitionistic fuzzy rough set, and solves the problem of big data set which cannot be solved by intuitionistic fuzzy rough set. Taking an actual data as an example, the scientificity, rationality and effectiveness of the algorithm are verified from the aspects of stability, diagnostic accuracy, optimization ability and time complexity. Compared with similar algorithms, the advantages of the proposed algorithm for big data processing are confirmed. Show more

Keywords: Intuitionistic fuzzy rough set, similarity relation, relative positive domain, generalized dynamic reduction, large fuzzy decision information system, attribute reduction

DOI: 10.3233/JIFS-200347

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7107-7122, 2020

Authors: Maryum, Ilsa | Nawaz, Waqas | Ud Din, Amad

Article Type: Research Article

Abstract: Non-uniformity in medical procedures, expensive medical treatments, and the shortage of medicines in different areas are health care problems in our country. This paper aims to resolve that problem by developing a web-based-application called Hospital Management Society (HMS) based on a novel Dynamic Optimized Fuzzy C-mean Clustering and Association Rule Mining (DOFCCARM). The purpose of HMS is to enhance the hospitals (and clinics) by regulating, overseeing and accrediting them to bring uniformity in health care facilities, to make the medical treatment cost effective, to find common diseases in a particular age and area, and to help government in identifying the …areas facing the shortage of licensed medicines. Therefore, HMS creates a single platform for both the doctors of central hospital (CH) and the doctors of member hospitals (MH). The CH provides clinical practice guidelines for various diseases. A team of doctors at CH evaluate the medical treatment provided by MH. If a hospital fails to maintain the standard then HMS blacklists such hospital. In our approach, we take a range of values to distinct successive partitions and generate a parallel membership function to make fuzzy sets of patients report, rather than single partitioning point. We determine the effectiveness of our approach through experiments on a dataset. The results revealed the most common age, symptoms and location for a particular disease and shortage of particular medicine in a specific area. Show more

Keywords: Fuzzy C-mean, association rule mining, hospital management society, intelligent system

DOI: 10.3233/JIFS-200349

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7123-7134, 2020

Authors: Li, Shugang | Zhu, Lirong | Zhu, Boyi | Wang, Ru | Zheng, Lingling | Yu, Zhaoxu | Lu, Hanyu

Article Type: Research Article

Abstract: 3D printing is the important part of the emerging industry, and the accurate prediction of technology hot spots (THS) in the 3D printing industry is crucial for the strategic technology planning. The patents of the THS are always in the minority and have outlier characteristics, so the existing single and rigid models cannot accurately and robustly predict the THS. In order to make up for the shortcomings of the existing research, this study proposes a model for robust composite attraction indicator (MRCAI), which avoids the impact of outlier patents on prediction accuracy depending on not only extracting the patent attraction …indicators (AIs) but also constructing the robust composite attraction indicator (CAI) according to the rough consensus of predicted results of CAIs with high generalization. Specifically, firstly, this study selects the patent AIs from the four dimensions of the attraction: technology group attraction, state attraction, enterprise attraction and inventor attraction. Secondly, in order to completely describe the attraction features of patent, AIs are directly and indirectly integrated into CAIs. Thirdly, we reduce the influence of outlier patents on prediction accuracy from two aspects: on the one hand, we initially select the CAIs with good generalization performance based on the prediction error fluctuation range. On the other hand, we build the robust CAIs by calculating the consensus of CAIs with high generalization performance based on the rough set. Fourthly, the 3D printing industry technology attention matrix is constructed to map the effective technology strategic planning based on predicted patent backward citation count by MRCAI in the short, medium and long term. Finally, the experimental results on 3D printing patent data show that MRCAI can effectively improve the efficiency in dealing with samples with outlier patents and has strong flexibility and robustness in predicting the THS in 3D printing industry. Show more

Keywords: Technology hot spots, outlier samples, robust CAI, 3D printing, technology attention matrix

DOI: 10.3233/JIFS-200404

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7135-7149, 2020

Authors: Lio, Waichon | Jia, Lifen

Article Type: Research Article

Abstract: Since the practical production is not continuously available and sometimes suffers unexpected breakdowns, this paper applies uncertainty theory to introducing an uncertain production risk process with breakdowns to handle the production problem with uncertain cycle times (consisting of uncertain on-times and uncertain off-times) and uncertain production amounts. The concept of shortage index of the uncertain production risk process with breakdowns is provided and some formulas for the calculation are given. Furthermore, the shortage time of the uncertain production risk process with breakdowns is proposed and its uncertainty distribution is obtained. Finally, some numerical examples are revealed.

Keywords: Production, risk process, uncertainty theory, uncertain renewal process

DOI: 10.3233/JIFS-200453

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7151-7160, 2020

Authors: Alberto Morales-Rosales, Luis | Algredo-Badillo, Ignacio | Lobato-Baez, Mariana | Hernández-Gracidas, Carlos | Rodríguez-Rangel, Héctor

Article Type: Research Article

Abstract: In this research, we implement an intelligent quantitative model to assess a specific qualitative intelligence scale in children between 5 and 8 years old, based on augmented reality and the well known WISC-IV test. The output of the model is a cognitive factor associated with the analogical reasoning level of the child, and the ulterior analysis of the evaluation measure is intended to serve as an aid for the teacher to discover problems related to the child’s ability to solve visual analogies. A quantitative approach to assess analogical reasoning is suitable to avoid ambiguous evaluations of qualitative results. Also, given …that the assessment employs a visual WISC subtest, it constitutes a non-verbal evaluation. Finally, the fact that the model is based on an intelligent approach guarantees that the assessment process is impartial, based on the quantitative scores obtained, instead of an interpretation of the results. The purpose of this work is to give evidence that a computer-aided adaption, employing augmented reality and a Fuzzy Petri Net, for the WISC test, will improve the teaching-learning process in children ranges from 5 to 8 years old. A case study is analyzed, where both the paper-based and the augmented reality versions are applied to five children with Spanish as their native tongue. We show the feasibility and potentiality of implementing the test in a multimedia version to provide teachers with a more reliable resource for the diagnosis and treatment of possible learning deficiencies in the child regarding disambiguation, non-verbality, and impartiality. Show more

Keywords: Intelligent quantitative model, analogical reasoning, WISC-IV test, augmented reality learning environment, computer-aided assessments

DOI: 10.3233/JIFS-200588

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7161-7175, 2020

Authors: Vijayabalaji, Srinivasan | Balaji, Parthasarathy | Ramesh, Adhimoolam

Article Type: Research Article

Abstract: The impetus of this paper is to broaden the structure of linguistic soft set (LSS) to a new domain namely sigmoid valued fuzzy soft set (SVFSS). Some operating laws on SVFSS are also provided. Using the complement concept on SVFSS we define maximum rejection. This maximum rejection paves a way for defining a new similarity measure on SVFSS termed as maximum likely ratio (MLR). A new MCGDM algorithm for SVFSS is proposed using MLR. An illustrative example of haze equipment problem on sigmoid valued fuzzy soft set setting is also given. A comparative analysis of our approach with the existing …approaches are also presented to justify our work. Show more

Keywords: Sigmoid valued fuzzy soft set, maximum rejection, maximum likely ratio, generalized maximum likely ratio, weighted maximum likely ratio

DOI: 10.3233/JIFS-200594

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7177-7187, 2020

Authors: Al-Zoubi, Ahmad | Tatas, Konstantinos | Kyriacou, Costas

Article Type: Research Article

Abstract: Heterogeneous systems featuring multiple kinds of processors are becoming increasingly attractive due to their high performance and energy savings over their homogeneous counterparts. With the OpenCL as a unified programming language providing program portability across different types of accelerators, finding the best task-to-device mapping will be the key to achieve such a high performance. We introduce in this work the design of a fuzzy logic classifier and the evaluation of its performance in classifying OpenCL workloads in a CPU-GPU-FPGA heterogeneous environment based on carefully analyzed kernel features. The classifier is designed as part of a scheduling scheme. Results demonstrate substantial …improvement in accuracy when compared to other classifiers such as the K-Nearest- Neighbor (KNN), Support-Vector-Machine (SVM), Random-Forest (RF), Naïve-Bayes (NB) and the Bayes-Network (BN) with low computational complexity, facilitating run-time operation. Show more

Keywords: Fuzzy Logic, Heterogeneous, Classification, OpenCL

DOI: 10.3233/JIFS-200616

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7189-7202, 2020

Authors: Ontiveros-Robles, Emanuel | Castillo, Oscar | Melin, Patricia

Article Type: Research Article

Abstract: In recent years, successful applications of singleton fuzzy inference systems have been made in a plethora of different kinds of problems, for example in the areas of control, digital image processing, time series prediction, fault detection and classification. However, there exists another relatively less explored approach, which is the use of non-singleton fuzzy inference systems. This approach offers an interesting way for handling uncertainty in complex problems by considering inputs with uncertainty, while the conventional Fuzzy Systems have their inputs with crisp values (singleton systems). Non-singleton systems have as inputs Type-1 membership functions, and this difference increases the complexity of …the fuzzification, but provides the systems with additional non-linearities and robustness. The main limitations of using a non-singleton fuzzy inference system is that it requires an additional computational overhead and are usually more difficult to apply in some problems. Based on these limitations, we propose in this work an approach for efficiently processing non-singleton fuzzy systems. To verify the advantages of the proposed approach we consider the case of general type-2 fuzzy systems with non-singleton inputs and their application in the classification area. The main contribution of the paper is the implementation of non-singleton General Type-2 Fuzzy Inference Systems for the classification task, aiming at analyzing its potential advantage in classification problems. In the present paper we propose that the use of non-singleton inputs in Type-2 Fuzzy Classifiers can improve the classification rate and based on the realized experiments we can observe that General Type-2 Fuzzy Classifiers, but with non-singleton fuzzification, obtain better results in comparison with respect to their singleton counterparts. Show more

Keywords: Type-2 fuzzy classifiers, Type-2 fuzzy logic, non-singleton

DOI: 10.3233/JIFS-200639

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7203-7215, 2020

Authors: Gao, Wenjing | Zhang, Wenjun | Gao, Haiyan | Zhu, Yonghua

Article Type: Research Article

Abstract: The increasing tendency of people expressing opinions via images online has motivated the development of automatic assessment of sentiment from visual contents. Based on the observation that visual sentiment is conveyed through many visual elements in images, we put forward to tackle visual sentiment analysis under multiple instance learning (MIL) formulation. We propose a deep multiple clustered instance learning formulation, under which a deep multiple clustered instance learning network (DMCILN) is constructed for visual sentiment analysis. Specifically, the input image is converted into a bag of instances through visual instance generation module, which is composed of a pre-trained convolutional neural …network (CNN) and two adaptation layers. Then, a fuzzy c-means routing algorithm is introduced for generating clustered instances as semantic mid-level representation to bridge the instance-to-bag gap. To explore the relationships between clustered instances and bags, we construct an attention based MIL pooling layer for representing bag features. A multi-head mechanism is integrated to form MIL ensembles, which enables to weigh the contribution of each clustered instance in different subspaces for generating more robust bag representation. Finally, we conduct extensive experiments on several datasets, and the experimental results verify the feasibility of our proposed approach for visual sentiment analysis. Show more

Keywords: Visual sentiment analysis, deep multiple clustered instance learning, fuzzy c-means routing, multi-head mechanism

DOI: 10.3233/JIFS-200675

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7217-7231, 2020

Authors: Yoseph, Fahed | Heikkilä, Markku

Article Type: Research Article

Abstract: Market Intelligence is knowledge extracted from numerous data sources, both internal and external, to provide a holistic view of the market and to support decision-making. Association Rules Mining provides powerful data mining techniques for identifying associations and co-occurrences in large databases. Market Basket Analysis (MBA) uses ARM to gain insights from heterogeneous consumer shopping patterns and examines the effects of marketing initiatives. As Artificial Intelligence (AI) more and more finds its way to marketing, it entails fundamental changes in the skills-set required by marketers. For MBA, AI provides important ways to improve both the outcomes of the market basket analysis …and the performance of the analysis process. In this study we demonstrate the effects of AI on MBA by our proposed new MBA model where results of computational intelligence are used in data preprocessing, in market segmentation and in finding market trends. We show with point-of-sale (POS) data of a small, local retailer that our proposed “Åbo algorithm” MBA model increases mining performance/intelligence and extract important marketing insights to assess both demand dynamics and product popularity trends. Additionally, the results show how, as related to the 80/20 percent rule, 78% of revenue is derived 16% of the product assortment. Show more

Keywords: Association rules mining, artificial intelligence, market intelligence, small and medium-sized retailer

DOI: 10.3233/JIFS-200707

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7233-7246, 2020

Authors: Xiao, Lu | Zhang, Siqi | Wei, Guiwu | Wu, Jiang | Wei, Cun | Guo, Yanfeng | Wei, Yu

Article Type: Research Article

Abstract: Since people around the world have gradually attached importance to resource conservation, various countries are actively taking measures to promote environmental protection and sustainable development. Green supply chain management (GSCM) have emerged in this context. Thus, in this essay, a novel intuitionistic fuzzy multiple attribute group decision making (MAGDM) method is designed to tackle this issue. First of all, CRITIC (Criteria Importance Through Inter-criteria Correlation) method is utilized to determine the weights of criteria. Later, the conventional Taxonomy method is extended to the intuitionistic fuzzy environment to compute the value of development attribute of each supplier. Then, the optimal one …can be determined. Eventually, an application about green supplier selection in steel industry is presented, and a comparative analysis is made to demonstrate the superiority of the proposed method. The main features of the proposed algorithm are that they provide a practical solution for selecting GSCM and presents an objective weighting method to enhance the effectiveness of the algorithm. Show more

Keywords: Multiple attribute group decision making (MAGDM), green supply chain management (GSCM), intuitionistic fuzzy sets (IFSs), taxonomy method, CRITIC method, steel industry

DOI: 10.3233/JIFS-200709

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7247-7258, 2020

Authors: Pan, Xingguang | Wang, Shitong

Article Type: Research Article

Abstract: The feature reduction fuzzy c-means (FRFCM) algorithm has been proven to be effective for clustering data with redundant/unimportant feature(s). However, the FRFCM algorithm still has the following disadvantages. 1) The FRFCM uses the mean-to-variance-ratio (MVR) index to measure the feature importance of a dataset, but this index is affected by data normalization, i.e., a large MVR value of original feature(s) may become small if the data are normalized, and vice versa. Moreover, the MVR value(s) of the important feature(s) of a dataset may not necessarily be large. 2) The feature weights obtained by the FRFCM are sensitive to the initial …cluster centers and initial feature weights. 3) The FRFCM algorithm may be unable to assign the proper weights to the features of a dataset. Thus, in the feature reduction learning process, important features may be discarded, but unimportant features may be retained. These disadvantages can cause the FRFCM algorithm to discard important feature components. In addition, the threshold for the selection of the important feature(s) of the FRFCM may not be easy to determine. To mitigate the disadvantages of the FRFCM algorithm, we first devise a new index, named the marginal kurtosis measure (MKM), to measure the importance of each feature in a dataset. Then, a novel and robust feature reduction fuzzy c-means clustering algorithm called the FRFCM-MKM, which incorporates the marginal kurtosis measure into the FRFCM, is proposed. Furthermore, an accurate threshold is introduced to select important feature(s) and discard unimportant feature(s). Experiments on synthetic and real-world datasets demonstrate that the FRFCM-MKM is effective and efficient. Show more

Keywords: Fuzzy c-means, feature reduction learning, marginal kurtosis measure, mean-to-variance ratio

DOI: 10.3233/JIFS-200714

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7259-7279, 2020

Authors: He, Tongze | Guo, Caili | Chu, Yunfei | Yang, Yang | Wang, Yanjun

Article Type: Research Article

Abstract: Community Question Answering (CQA) websites has become an important channel for people to acquire knowledge. In CQA, one key issue is to recommend users with high expertise and willingness to answer the given questions, i.e., expert recommendation. However, a lot of existing methods consider the expert recommendation problem in a static context, ignoring that the real-world CQA websites are dynamic, with users’ interest and expertise changing over time. Although some methods that utilize time information have been proposed, their performance improvement can be limited due to fact that they fail they fail to consider the dynamic change of both user …interests and expertise. To solve these problems, we propose a deep learning based framework for expert recommendation to exploit user interest and expertise in a dynamic environment. For user interest, we leverage Long Short-Term Memory (LSTM) to model user’s short-term interest so as to capture the dynamic change of users’ interests. For user expertise, we design user expertise network, which leverages feedback on users’ historical behavior to estimate their expertise on new question. We propose two methods in user expertise network according to whether the dynamic property of expertise is considered. The experimental results on a large-scale dataset from a real-world CQA site demonstrate the superior performance of our method. Show more

Keywords: Expert recommendation, user modeling, neural network, community question answering

DOI: 10.3233/JIFS-200729

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7281-7292, 2020

Authors: Xu, Junxiang | Zhang, Jin | Guo, Jingni

Article Type: Research Article

Abstract: Taking into account the uncertainties of the factors of in-transit transportation cost, hub transshipment cost, hub construction cost, in-transit transportation time, hub transshipment time, and demand, this study uses triangular fuzzy numbers, expected value criteria, and distribution of credibility measure to minimise the total transportation cost of the hub-and-spoke road-rail combined transport (RRCT) network and the maximum transportation limit time between the origin and destination of the network. Firstly, a non-linear programming mathematical model is constructed for the regional hub-and-spoke RRCT network based on uncertain cost-time-demand. Then, an improved genetic algorithm is designed to obtain an optimized scheme. The algorithm …uses genetic algorithm to search the global space, and uses two local search methods, i.e. shift and exchange, to search the local space. Finally, the RRCT network along the Yaan-Linzhi section of the Sichuan-Tibet Railway is used as the research object to verify the applicability and effectiveness of the regional hub-and-spoke RRCT network model and the algorithm proposed in the study. Show more

Keywords: Road-rail combined transport, hub-and-spoke network, uncertain factor, improved genetic algorithm, Sichuan-Tibet Railway

DOI: 10.3233/JIFS-200748

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7293-7313, 2020

Authors: Wei, Lixin | Zhang, JinLu | Fan, Rui | Li, Xin | Sun, Hao

Article Type: Research Article

Abstract: In this article, an effective method, called an adaptive covariance strategy based on reference points (RPCMA-ES) is proposed for multi-objective optimization. In the proposed algorithm, search space is divided into independent sub-regions by calculating the angle between the objective vector and the reference vector. The reference vectors can be used not only to decompose the original multi-objective optimization problem into a number of single-objective subproblems, but also to elucidate user preferences to target a preferred subset of the whole Pareto front (PF). In this respect, any single objective optimizers can be easily used in this algorithm framework. Inspired by the …multi-objective estimation of distribution algorithms, covariance matrix adaptation evolution strategy (CMA-ES) is involved in RPCMA-ES. A state-of-the-art optimizer for single-objective continuous functions is the CMA-ES, which has proven to be able to strike a good balance between the exploration and the exploitation of search space. Furthermore, in order to avoid falling into local optimality and make the new mean closer to the optimal solution, chaos operator is added based on CMA-ES. By comparing it with four state-of-the-art multi-objective optimization algorithms, the simulation results show that the proposed algorithm is competitive and effective in terms of convergence and distribution. Show more

Keywords: Multi-objective optimization problem, Reference point, Covariance matrix adaptation evolutionary strategy, Chaos operator

DOI: 10.3233/JIFS-200749

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7315-7332, 2020

Authors: Zuo, Mingcheng | Dai, Guangming

Article Type: Research Article

Abstract: When optimizing complicated engineering design problems, the search spaces are usually extremely nonlinear, leading to the great difficulty of finding optima. To deal with this challenge, this paper introduces a parallel learning-selection-based global optimization framework (P-lsGOF), which can divide the global search space to numbers of sub-spaces along the variables learned from the principal component analysis. The core search algorithm, named memory-based adaptive differential evolution algorithm (MADE), is parallel implemented in all sub-spaces. MADE is an adaptive differential evolution algorithm with the selective memory supplement and shielding of successful control parameters. The efficiency of MADE on CEC2017 unconstrained problems and …CEC2011 real-world problems is illustrated by comparing with recently published state-of-the-art variants of success-history based adaptative differential evolution algorithm with linear population size reduction (L-SHADE) The performance of P-lsGOF on CEC2011 problems shows that the optimized results by individually conducting MADE can be further improved. Show more

Keywords: Parallel optimization framework, real-world problems, learning-based differential evolution

DOI: 10.3233/JIFS-200753

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7333-7361, 2020

Authors: Chen, Chen | Ma, Feng | Liu, Jialun | Negenborn, Rudy R. | Liu, Yuanchang | Yan, Xinping

Article Type: Research Article

Abstract: Human experience is regarded as an indispensable part of artificial intelligence in the process of controlling or decision making for autonomous cargo ships. In this paper, a novel Deep Q-Network-based (DQN) approach is proposed, which performs satisfactorily in controlling a cargo ship automatically without any human experience. At the very beginning, we use the model of KRISO Very Large Crude Carrier (KVLCC2) to describe a cargo ship. To manipulate this ship has to conquer great inertia and relatively insufficient driving force. Subsequently, customary waterways, regulations, conventions are described with Artificial Potential Field and value-functions in DQN. Based on this, the …artificial intelligence of planning and controlling a cargo ship can be obtained by undertaking sufficient training, which can control the ship directly, while avoiding collisions, keeping its position in the middle of the route as much as possible. In simulation experiments, it is demonstrated that such an approach performs better than manual works and other traditional methods in most conditions, which makes the proposed method a promising solution in improving the autonomy level of cargo ships. Show more

Keywords: Deep Q-network, reinforcement learning, artificial intelligence, autonomous ships

DOI: 10.3233/JIFS-200754

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7363-7379, 2020

Authors: Hashmi, Masooma Raza | Riaz, Muhammad | Smarandache, Florentin

Article Type: Research Article

Abstract: This manuscript contributes a progressive mathematical model for the analysis of novel coronavirus (COVID-19) and improvement of the victim from COVID-19 with some suitable circumstances. We investigate the innovative approach of the m-polar neutrosophic set (MPNS) to deal with the hesitations and obscurities of objects and rational thinking in decision-making obstacles. In this article, we propose the generalized weighted aggregation and generalized Einstein weighted aggregation operators in the context of m-polar neutrosophic numbers (MPNNs). The motivational aim of this paper is that we present a case study based on data amalgamation for the diagnosis of COVID-19 and examine with the …help of MPN-data. By using the proposed technique on generalized operators, we discuss the recovery of the victim with the time factor, proper medication, and some suitable circumstances. Ultimately, we present the advantages and productiveness of the proposed algorithm under the influence of parameter ð to the recovery results. The versatility and superiority of the proposed methodology with some existing approaches can be observed by the comparative analysis. Show more

Keywords: m-polar neutrosphic set (MPNS), m-polar neutrosophic generalized weighted aggregation (MPNGWA) operator, m-polar neutrosophic generalized Einstein weighted aggregation (MPNGEWA) operator, multi-criteria decision-making (MCDM) for medical diagnosis, Recovery of patient, comparative analysis

DOI: 10.3233/JIFS-200761

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7381-7401, 2020

Authors: Huang, Yangke | Wang, Zhiming

Article Type: Research Article

Abstract: Network pruning has been widely used to reduce the high computational cost of deep convolutional neural networks(CNNs). The dominant pruning methods, channel pruning, removes filters in layers based on their importance or sparsity training. But these methods often give limited acceleration ratio and encounter difficulties when pruning CNNs with skip connections. Block pruning methods take a sequence of consecutive layers (e.g., Conv-BN-ReLu) as a block and remove entire block each time. However, previous methods usually introduce new parameters to help pruning and lead additional parameters and extra computations. This work proposes a novel multi-granularity pruning approach that combines block pruning …with channel pruning (BPCP). The block pruning (BP) module remove blocks by directly searches the redundant blocks with gradient descent and leaves no extra parameters in final models, which is friendly to hardware optimization. The channel pruning (CP) module remove redundant channels based on importance criteria and handles CNNs with skip connections properly, which further improves the overall compression ratio. As a result, for CIFAR10, BPCP reduces the number of parameters and MACs of a ResNet56 model up to 78.9% and 80.3% respectively with <3% accuracy drop. In terms of speed, it gives a 3.17 acceleration ratio. Our code has been made available at https://github.com/Pokemon-Huang/BPCP . Show more

Keywords: Neural network compression, network pruning, residual networks

DOI: 10.3233/JIFS-200771

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7403-7410, 2020

Authors: Nataraj, Sathees Kumar | Paulraj, M. P. | Bin Abdullah, Ahmad Nazri | Bin Yaacob, Sazali

Article Type: Research Article

Abstract: In this paper, a speech-to-text translation model has been developed for Malaysian speakers based on 41 classes of Phonemes. A simple data acquisition algorithm has been used to develop a MATLAB graphical user interface (GUI) for recording the isolated word speech signals from 35 non-native Malaysian speakers. The collected database consists of 86 words with 41 classes of phoneme based on Affricatives, Diphthongs, Fricatives, Liquid, Nasals, Semivowels and Glides, Stop and Vowels. The speech samples are preprocessed to eliminate the undesirable artifacts and the fuzzy voice classifier has been employed to classify the samples into voiced sequence and unvoiced sequence. …The voiced sequences are divided into frame segments and for each frame, the Linear Predictive co-efficients features are obtained from the voiced sequence. Then the feature sets are formed by deriving the LPC features from all the extracted voiced sequences, and used for classification. The isolated words chosen based on the phonemes are associated with the extracted features to establish classification system input-output mapping. The data are then normalized and randomized to rearrange the values into definite range. The Multilayer Neural Network (MLNN) model has been developed with four combinations of input and hidden activation functions. The neural network models are trained with 60%, 70% and 80% of the total data samples. The neural network architecture was aimed at creating a robust model with 60%, 70%, and 80% of the feature set with 25 trials. The trained network model is validated by simulating the network with the remaining 40%, 30%, and 20% of the set. The reliability of trained network models were compared by measuring true-positive, false-negative, and network classification accuracy. The LPC features show better discrimination and the MLNN neural network models trained using the LPC spectral band features gives better recognition. Show more

Keywords: Fuzzy voice classifier, Malaysian English pronunciation, linear predictive coefficients (LPCC), neural network models (MLNN).

DOI: 10.3233/JIFS-200780

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7411-7429, 2020

Authors: Vijayabalaji, Srinivasan | Balaji, Parthasarathy

Article Type: Research Article

Abstract: In 1982, Pawlak set up a fresh approach to deal with uncertainties namely rough set theory, Multiple-Criteria Decision Making (MCDM) first traced by Benjamin Franklin in 17th century. Several researchers did significant contribution to MCDM thereafter. An assignment problem involves what happens to the effective function when each of a number of sources is associated with the same number of destinations. Using MCDM, Rough matrices and Assignment model we are inducing an idea to pick Best’11 in all three formats (Test, One Day Internationals (ODI), Twenty20 International matches (T20I)) in the game of cricket with players from two nationals. Using …the existing data, we are providing best batting position for any player to maximize team’s run. In addition, based on the preprocessing of informations, we are bringing some new indices to pick Indian squad for the 2019 World Cup cricket held in England from May 2019 to July 2019. After making a selection from our framework, we will compare the list of selected players by Board of Cricket Control Board in India (BCCI) and giveaway the percentage of similarity between the our selection against BCCI’s selection. We pick 11 players after selecting 15 players from 24 players to formulate the assignment model and offer the best batting order to optimize team’s run. Show more

Keywords: Rough set, rough matrix, information systems, MCDM, best’11, assignment problem

DOI: 10.3233/JIFS-200784

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7431-7447, 2020

Authors: George Fernandez, I. | Arokia Renjith, J.

Article Type: Research Article

Abstract: Cloud computing technology is playing a major role in the industry and real-life, for providing fast services such as data sharing and allocating the cloud resources that are paid and truly required. In this scenario, the cloud users are scheduled according to the rule-based systems for attempting to automate the matching between computing requirements and resources. Even though, the majority auto-scaling algorithms only helped as indicators for simple resource utilization and also not considered both cloud user needs and budget concerns. For this purpose, we propose a new model which is the combination of auto-scaling algorithms, resource allocation and scheduling …for allocating the appropriate resources and scheduled them. This model consists of three new algorithms namely Grey Wolf Optimization and Fuzzy rules based Resource allocation and Scheduling Algorithm (GWOFRSA), Auto-Scaling Algorithm for Cloud based Web Application (ASACWA) and Auto-Scaling Algorithm for handling Distributed Computing Tasks (ASADCT). Here, we introduce new auto-scaling algorithms for enhancing the performance of cloud services. In this work, the optimization technique is used to predict the cloud server workload, resource requirements and it also uses fuzzy rules for monitoring the resource utilization and the size of virtual machine allocation process. According to the workload prediction, the completion time is estimated for each cloud server. The experiments are conducted by using a simulator called CloudSim environment of Java programming and compared with the existing works available in this direction in terms of resource utilization and enhance the cloud performance with better Quality of Service of Virtual Machine allocation, Missed Deadline, Demand Satisfaction, Power Utilization, CPU Load and throughput. Show more

Keywords: Grey Wolf Optimization, resource allocation, scheduling, auto-scaling, virtual machine, cloud computing and performance

DOI: 10.3233/JIFS-200787

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7449-7467, 2020

Authors: Liu, Peide | Akram, Muhammad | Sattar, Aqsa

Article Type: Research Article

Abstract: The complex q-rung orthopair fuzzy set (Cq-ROFS), an efficient generalization of complex intuitionistic fuzzy set (CIFS) and complex Pythagorean fuzzy set (CPFS), is potent tool to handle the two-dimensional information and has larger ability to translate the more uncertainty of human judgment then CPFS as it relaxes the constrains of CPFS and thus the space of allowable orthopair increases. To solve the multi-criteria decision making (MCDM) problem by considering that criteria are at the same priority level may affect the results because in realistic situations the priority level of criteria is different. In this manuscript, we propose some useful prioritized …AOs under Cq-ROF environment by considering the prioritization among attributes. We develop two prioritized AOs, namely complex q-rung orthropair fuzzy prioritized weighted averaging (C-qROFPWA) operator and complex q-rung orthropair fuzzy prioritized weighted geometric (Cq-ROFPWG) operator. We also consider their desirable properties and two special cases with their detailed proofs. Moreover, we investigate a new technique to solve the MCDM problem by initiating an algorithm along with flowchart on the bases of proposed operators. Further, we solve a practical example to reveal the importance of proposed AOs. Finally, we apply the existing operators on the same data to compare our computed result to check the superiority and validity of our proposed operators. Show more

Keywords: Complex q-rung orthopair fuzzy set, prioritized weighted averaging operator, prioritized weighted geometric operator, decision making

DOI: 10.3233/JIFS-200789

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7469-7493, 2020

Authors: Xia, Daoxun | Guo, Fang | Liu, Haojie | Yu, Sheng

Article Type: Research Article

Abstract: The recent successful methods of person re-identification (person Re-ID) involving deep learning have mostly adopted supervised learning algorithms, which require large amounts of manually labelled data to achieve good performance. However, there are two important unresolved problems, dataset annotation is an expensive and time-consuming process, and the performance of recognition model is seriously affected by visual change. In this paper, we primarily study an unsupervised method for learning visual invariant features using networks with temporal coherence for person Re-ID; this method exploits unlabelled data to learn expressions from video. In addition, we propose an unsupervised learning integration framework for pedestrian …detection and person Re-ID for practical applications in natural scenarios. In order to prove the performance of the unsupervised person re-identification algorithm based on visual invariance features, the experimental results were verified on the iLIDS-VID, PRID2011 and MARS datasets, and a better performance of 57.5% (R-1) and 73.9% (R-5) was achieved on the iLIDS-VID and MARS datasets, respectively. The efficiency of the algorithm was validated by using BING + R-CNN as the pedestrian detector, and the person Re-ID system achieved a computation speed of 0.09s per frame on the PRW dataset. Show more

Keywords: Person re-identification, unsupervised learning, pedestrian detection, object recognition, visual invariant features

DOI: 10.3233/JIFS-200793

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7495-7503, 2020

Authors: Li, Meng | Zhao, Yifei | Xiong, Xinglong | Ma, Yuzhao

Article Type: Research Article

Abstract: Synchronous delivery with different vehicles, as an emerging concept of the delivery network, improves the efficiency of the modern logistics system significantly, which gradually gives birth to a new issue: the traveling salesman problem with drone (TSP-D). In this paper, we propose a one-truck-multiple-drone (OTMD) model on the base of the TSP-D. Compared with the traditional one-truck-one-drone (OTOD) and multiple drones models, our scheme introduces a united objective function into the optimization calculation. In terms of the proposed multiple levels iterative theory, we can compute the optimal synchronous delivery network that takes both the total delivery time and the number …of drones into consideration. Four types of customer distributions are employed to investigate the OTMD model and its associated calculation approaches. Comparing the parameters of the optimal network in different delivery models, we study the relationship among the total delivery time, customer distribution and the number of serving drones. These simulation results verify the feasibility and practicality of the OTMD, and demonstrate the features of optimization calculation with different customer distributions, being beneficial to improve the efficiency of the model logistics system. Show more

Keywords: Traveling salesman problem with drone (TSP-D), one-truck-multiple-drone (OTMD) model, optimization calculation, modern logistics system

DOI: 10.3233/JIFS-200818

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7505-7519, 2020

Authors: Senthilkumar, G. | Chitra, M.P.

Article Type: Research Article

Abstract: In the recent years increase in computer and mobile user’s, data storage has become a priority in all fields. Large- and Small-Scale businesses today thrive on their data and they spent a huge amount of money to maintain this data. Cloud Storage provides on– demand availability of IT services via Large Distributed Data Centers over High Speed Networks. Network Virtualization is been considered as a recent proliferation in cloud computing which emerges as a Multifaceted method towards future internet by facilitating shared resources. Provisioning of the Virtual Network is considered to be a major challenge in terms of creating NP …hard problems, minimization of workflow processing time under control resource etc. In order to cope up with the challenges our work has proposed an Ensemble Dynamic Optimization based on Inverse Adaptive Heuristic Critic (IAHC) for overcoming the virtual network provisioning in cloud computing. Our approach gets observed from Expert Observation and provides an approximate solution when various workflows arrives online at various Window Time (WT). It also provides an Optimal Policy for predicting the effect of Resource Allocation of one task for Present as well as Future time Windows. In order to the above approaches it also avoids the high sample complexity and maintains the cost while scaling up to provide Resource Provision. Therefore, our work achieves an adequate policy towards Resource Allocation, reduces the Cost as well as Energy Consumption and deals with real time uncertainties to avoid the Virtual Network provisioning. Show more

Keywords: Inverse adaptive heuristic critic, dynamic optimization, reward feature, network virtualization, user resource allocation

DOI: 10.3233/JIFS-200823

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7521-7535, 2020

Authors: Mahmood, Asma | Abbas, Mujahid

Article Type: Research Article

Abstract: The aim of this paper is to construct a matrix of interpersonal influences employing TOPSIS and then to apply the matrix in influence model and doubly extended TOPSIS. Entries of that matrix are obtained from coefficients of relative closeness. Such a systematically constructed matrix performs better than the direct influence matrix because of the consideration of alternatives under certain criteria/attributes. Implementation of such influence matrix improves an influence model and group decision process. In this paper, TOPSIS is used for individual as well as group decisions. Once the decisions are reached by individuals with the help of TOPSIS, then coefficients …of relative closeness are obtained and matrix of interpersonal influences is constructed. This matrix is used in influence model and to construct the influenced decision matrices. These influenced decision matrices are aggregated to get the collective decision. This strategy is based on the fact that the decisions taken by individuals affect their collective decision in future. Show more

Keywords: Group decision making, social influence networks, multi criteria decision making, TOPSIS

DOI: 10.3233/JIFS-200833

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7537-7546, 2020

Authors: Jin, Chen | Xu, Zeshui | Wang, Jinwei

Article Type: Research Article

Abstract: With the rapid development of economy and industrialization, environmental problems, especially haze pollution, are being more and more serious. When assessing the economic losses caused by haze, although the traditional quantitative method can show the amount of economic losses visually, there are also some inaccuracies in the calculation process. Based on the situation, we propose a new method called uncertain probabilistic linguistic analytic hierarchy process (UPL-AHP), which combines traditional analytic hierarchy process with uncertain probabilistic linguistic term sets to process decision information in complex problems. Firstly, we propose the concept of uncertain probabilistic linguistic comparison matrix. Then, a new approach …is given to check and improve the consistency of an uncertain probabilistic linguistic comparison matrix. After that, we introduce the application of UPL-AHP in group decision making. Finally, the proposed method is used to analyze a practical case concerning the economic losses of haze. Some relevant policy recommendations are given based on the results. Show more

Keywords: Haze pollution, economic losses, probabilistic linguistic term set, comparison matrix, analytic hierarchy process, uncertainty

DOI: 10.3233/JIFS-200834

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7547-7569, 2020

Authors: Peng, Xindong | Smarandache, Florentin

Article Type: Research Article

Abstract: The rare earth industry is a crucial strategic industry that is related to the national economy and national security. In the context of economic globalization, international competition is becoming increasingly fierce, and the rare earth industry is facing a more severe survival and development environment than ever before. Although China is the greatest world’s rare earth country in rare earth reserves, production, consumption and export volume, it is not a rare earth power. The rare earth industry has no right to speak in the international market. The comparative advantage is weakening and the security of rare earth industry appears. Therefore, …studying the rare earth industry security has important theoretical and practical significance. When measuring the China’s rare earth industry security, the primary problem involves tremendous uncertainty. Neutrosophic soft set (NSS), depicted by the parameterized form of truth membership, falsity membership and indeterminacy membership, is a more serviceable pattern for capturing uncertainty. In this paper, five dimensions of rare earth industry security are identified and then prioritized against twelve different criteria relevant to structure, organization, layout, policy and ecological aspects of industry security. Then, the objective weight is computed by CRITIC (Criteria Importance Through Inter-criteria Correlation) method while the integrated weight is determined by concurrently revealing subjective weight and objective weight. Later, neutrosophic soft decision making method based CoCoSo (Combined Compromise Solution) is explored for settling the issue of low discrimination. Lastly, the feasibility and validity of the developed algorithm is verified by the issue of China’s rare earth industry security evaluation. Show more

Keywords: Rare earth industry security, neutrosophic soft set, CoCoSo, CRITIC

DOI: 10.3233/JIFS-200847

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7571-7585, 2020

Authors: Zhang, Li | Cheng, Shufeng | Liu, Peide

Article Type: Research Article

Abstract: Probability multi-valued neutrosophic sets (PMVNSs) can better describe the incomplete and indeterminate evaluation information, and the ELECTRE method can rank the alternatives in the light of the outranking relations among criteria. To combine their advantages, this paper introduces an extended ELECTRE method to address multi-criteria group decision-making (MCGDM) problems with the information of PMVNSs. Firstly, we introduce the definitions of PMVNSs and the classical ELECTRE method, discuss the ELECTRE-based outranking relations for PMVNSs and analyze some properties of them. Furthermore, the probability multi-valued neutrosophic ELECTRE method is developed to address MCGDM problems based on the proposed distance measure and outranking …relations for PMVNSs. Finally, a typical example for logistics outsourcing provider selection is devoted to demonstrate the feasibility of the proposed approach. Moreover, the same example-based comparisons with other existing methods are carried out, the results show our proposed approach outperforms the existing methods in solving the MCGDM problems with PMVNSs. Show more

Keywords: ELECTRE, outranking relations, probability multi-valued neutrosophic sets, MCGDM

DOI: 10.3233/JIFS-200861

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7587-7604, 2020

Authors: Elavarasan, Dhivya | Vincent, Durai Raj

Article Type: Research Article

Abstract: The development in science and technical intelligence has incited to represent an extensive amount ofdata from various fields of agriculture. Therefore an objective rises up for the examination of the available data and integrating with processes like crop enhancement, yield prediction, examination of plant infections etc. Machine learning has up surged with tremendous processing techniques to perceive new contingencies in the multi-disciplinary agrarian advancements. In this pa- per a novel hybrid regression algorithm, reinforced extreme gradient boosting is proposed which displays essentially improved execution over traditional machine learning algorithms like artificial neural networks, deep Q-Network, gradient boosting, ran- dom forest …and decision tree. Extreme gradient boosting constructs new models, which are essentially, decision trees learning from the mistakes of their predecessors by optimizing the gradient descent loss function. The proposed hybrid model performs reinforcement learning at every node during the node splitting process of the decision tree construction. This leads to effective utilizationofthesamplesbyselectingtheappropriatesplitattributeforenhancedperformance. Model’sperformanceisevaluated by means of Mean Square Error, Root Mean Square Error, Mean Absolute Error, and Coefficient of Determination. To assure a fair assessment of the results, the model assessment is performed on both training and test dataset. The regression diagnostic plots from residuals and the results obtained evidently delineates the fact that proposed hybrid approach performs better with reduced error measure and improved accuracy of 94.15% over the other machine learning algorithms. Also the performance of probability density function for the proposed model delineates that, it can preserve the actual distributional characteristics of the original crop yield data more approximately when compared to the other experimented machine learning models. Show more

Keywords: Crop yield prediction, reinforcement learning, extreme gradient boosting, intelligent agrarian application

DOI: 10.3233/JIFS-200862

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7605-7620, 2020

Authors: Zhao, Tao | Li, Haodong | Dian, Songyi

Article Type: Research Article

Abstract: In this paper, we propose a method to assess the collision risk and a strategy to avoid the collision for solving the problem of dynamic real-time collision avoidance between robots when a multi-robot system is applied to perform a given task collaboratively and cooperatively. The collision risk assessment method is based on the moving direction and position of robots, and the collision avoidance strategy is based on the artificial potential field (APF) and the fuzzy inference system (FIS). The traditional artificial potential field (TAPF) has the problem of the local minimum, which will be optimized by improving the repulsive field …function. To adjust the speed of the robot adaptively and improve the security performance of the system, the FIS is used to plan the speed of robots. The hybridization of the improved artificial potential field (IAPF) and the FIS will make each robot safely and quickly find a collision-free path from the starting position to the target position in a completely unknown environment. The simulation results show that the strategy is effective and useful for collision avoidance in multi-robot systems. Show more

Keywords: Multi-robot, collision avoidance, path planning, improved artificial potential field, fuzzy inference system

DOI: 10.3233/JIFS-200869

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7621-7637, 2020

Authors: Wang, Hongyan | Huang, Zhi | Lu, Jinbo

Article Type: Research Article

Abstract: In this paper, by replacing the integral mass flow equation to fractional-order mass flow equation, the fractional-order mathematical model of 2DOF pneumatic-hydraulic upper limb rehabilitation training system is established. A new 2DOF fractional-order fuzzy PID (FOFPID) controller is designed, to provides a new reference for improving the control accuracy of the pneumatic system. In the design of the controller, the weight parameters of the input terms are transformed into the weight parameters of the error, and the input, which are analyzed to improve the accuracy of the controller design. The parameters of the control system are determined by multi-objective particle …swarm optimization. To prove the effectiveness of the proposed control method, the experimental research was carried out by building the experimental platform of pneumatic-hydraulic upper limb rehabilitation training system. The results show that the 2DOF FOFPID controller has better performance than other designed controllers under different working conditions. Show more

Keywords: Pneumatic-hydraulic drive, rehabilitation training system, fractional-order modeling, fractional-order fuzzy PID control

DOI: 10.3233/JIFS-200891

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7639-7651, 2020

Authors: Kumar, Ranjan | Edalatpanah, SA | Mohapatra, Hitesh

Article Type: Research Article

Abstract: There are different conditions where SPP play a vital role. However, there are various conditions, where we have to face with uncertain parameters such as variation of cost, time and so on. So to remove this uncertainty, Yang et al. [1 ] “[Journal of Intelligent & Fuzzy Systems, 32(1), 197-205”] have proposed the fuzzy reliable shortest path problem under mixed fuzzy environment and claimed that it is better to use their proposed method as compared to the existing method i.e., “[Hassanzadeh et al.; A genetic algorithm for solving fuzzy shortest path problems with mixed fuzzy arc lengths, Mathematical and Computer Modeling, …57(2013) 84-99”  [2 ]]. The aim of this note is, to highlight the shortcoming that is carried out in Yang et al. [1 ] article. They have used some mathematical incorrect assumptions under the mixed fuzzy domain, which is not true in a fuzzy environment. Show more

Keywords: normal fuzzy number, Shortest path problem (SPP), fuzzy shortest path problem (FSPP), mixed fuzzy environment

DOI: 10.3233/JIFS-200923

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7653-7656, 2020

Authors: Zhou, Linyong | You, Shanping | Ren, Bimo | Yu, Xuhong | Xie, Xiaoyao

Article Type: Research Article

Abstract: Pulsars are highly magnetized, rotating neutron stars with small volume and high density. The discovery of pulsars is of great significance in the fields of physics and astronomy. With the development of artificial intelligent, image recognition models based on deep learning are increasingly utilized for pulsar candidate identification. However, pulsar candidate datasets are characterized by unbalance and lack of positive samples, which has contributed the traditional methods to fall into poor performance and model bias. To this end, a general image recognition model based on adversarial training is proposed. A generator, a classifier, and two discriminators are included in the …model. Theoretical analysis demonstrates that the model has a unique optimal solution, and the classifier happens to be the inference network of the generator. Therefore, the samples produced by the generator significantly augment the diversity of training data. When the model reaches equilibrium, it can not only predict labels for unseen data, but also generate controllable samples. In experiments, we split part of data from MNIST for training. The results reveal that the model not only behaves better classification performance than CNN, but also has better controllability than CGAN and ACGAN. Then, the model is applied to pulsar candidate dataset HTRU and FAST. The results exhibit that, compared with CNN model, the F-score has increased by 1.99% and 3.67%, and the Recall has also increased by 6.28% and 8.59% respectively. Show more

Keywords: Generative adversarial nets, convolutional neural network, unbalanced dataset, pulsar candidate identification

DOI: 10.3233/JIFS-200925

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7657-7669, 2020

Authors: Liu, Xuning | Zhang, Guoying | Zhang, Zixian

Article Type: Research Article

Abstract: The feature selection of influencing factors of coal and gas outbursts is of great significance for presenting the most discriminative features and improving prediction performance of a classifier, the paper presents an effective hybrid feature selection and modified outbursts classifier framework which aims at solving exiting coal and gas outbursts prediction problems. First, a measurement standard based on maximum information coefficient(MIC) is employed to identify the wide correlations between two variables; Second, based on a ranking procedure using non-dominated sorting genetic algorithm(NSGAII), maximum relevance minimum redundancy(MRMR) algorithm is subsequently performed to find out candidate feature set highly related to the …class label and uncorrelated with each other; Third, random forest(RF) is employed to search the optimal feature subset from the candidate feature set, then the optimal feature subset that influences the classification performance of coal and gas outbursts is obtained; Finally, an improved classifier model has been proposed that combines gradient boosting decision tree(GBDT) and k-nearest neighbor(KNN) for outbursts prediction. In the modified classifier model, the GBDT is utilized to assign different weights to features, then the weighted features are input into the KNN to verify the effectiveness of proposed method on coal and gas outbursts dataset. The experimental results conclude that our proposed scheme is effective in the number of feature and prediction accuracy when compared with other related state-of-the-art prediction models based on feature selection for coal and gas outbursts. Show more

Keywords: Coal and gas outbursts, Maximum information coefficient, Non-dominated sorting genetic algorithm, Maximum relevance minimum redundancy, Random forest, Gradient boosting decision tree, K-nearest neighbor

DOI: 10.3233/JIFS-200937

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7671-7691, 2020

Authors: Guo, Jingni | Xu, Junxiang | Liao, Wei

Article Type: Research Article

Abstract: The multimodal transport network in the region with complex environment and being easily affected by disturbance factors is used as the research object in our work. The characteristics of the cascading failure of such multimodal transport network were analyzed. From the perspective of network load redistribution, the risk control methods for the cascading failure of the multimodal transport network were investigated. This research aims to solve the problem that traditional load redistribution methods usually ignore the original-destination (OD) constraint and uncertain risks. The conditional value-at-risk (CVaR) was improved based on the Bureau of Public Roads (BPR) road impedance function to …quantify the uncertainty of the disturbance factors. A nonlinear programming model was established with the generalized travel time as the objective function. A parallelly-running cellular ant colony algorithm was designed to solve the model. Empirical analysis was conducted on the multimodal transport network in Sichuan-Tibet region of China. The results of the empirical analysis verified the applicability of the proposed load redistribution method to such kind of regions and the effectiveness of the algorithm. This research provides theoretical basis and practical reference for the risk control of the cascading failure of multimodal transport networks in some regions. Show more

Keywords: Uncertain disturbance, multimodal transport network, risk control, load redistribution, cellular ant colony algorithm

DOI: 10.3233/JIFS-200968

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7693-7704, 2020

Authors: Kachouei, Mohammad | Ebrahimnejad, Ali | Bagherzadeh-Valami, Hadi

Article Type: Research Article

Abstract: Data Envelopment Analysis (DEA) is a non-parametric approach based on linear programming for evaluating the performance of decision making units (DMUs) with multiple inputs and multiple outputs. The lack of the ability to generate the actual weights, not considering the impact of undesirable outputs in the evaluation process and the measuring of efficiencies of DMUs based upon precise observations are three main drawbacks of the conventional DEA models. This paper proposes a novel approach for finding the common set of weights (CSW) to compute efficiencies in DEA model with undesirable outputs when the data are represented by fuzzy numbers. The …proposed approach is based on fuzzy arithmetic which formulates the fuzzy additive DEA model as a linear programing problem and gives fuzzy efficiencies of all DMUs based on resulting CSW. We demonstrate the applicability of the proposed model with a simple numerical example. Finally, in the context of performance management, an application of banking industry in Iran is presented for analyzing the influence of fuzzy data and depicting the impact of undesirable outputs over the efficiency results. Show more

Keywords: Data envelopment analysis, undesirable outputs, fuzzy numbers, common set of weights

DOI: 10.3233/JIFS-201022

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7705-7722, 2020

Authors: Ali, Mohamed R. | Hadhoud, Adel R. | Ma, Wen-Xiu

Article Type: Research Article

Abstract:  In this approximation study, a nonlinear singular periodic model in nuclear physics is solved by using the Hermite wavelets (HW) technique coupled with a numerical iteration technique such as the Newton Raphson (NR) one for solving the resulting nonlinear system. The stimulation of offering this numerical work comes from the aim of introducing a consistent framework that has as effective structures as Hermite wavelets. Two numerical examples of the singular periodic model in nuclear physics have been investigated to observe the robustness, proficiency, and stability of the designed scheme. The proposed outcomes of the HW technique are compared with available …numerical solutions that established fitness of the designed procedure through performance evaluated on a multiple execution. Show more

Keywords: Singular periodic systems in nuclear physics, Hermite wavelets, hybrid approach, Gaussian formula of integration, collocation technique

DOI: 10.3233/JIFS-201045

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7723-7731, 2020

Authors: Cao, Jing | Xu, Xuan-hua | Dai, Fei | Pan, Bin

Article Type: Research Article

Abstract: This study uses opinion dynamics to explore the influence of extremists in the consensus process of large group decision-making. When moderates are exposed to extremists, their risk preference will be affected. By using the opinion leader theory for reference, the influence model of extremists is constructed. To better study the influence of extremists, the similarity of risk preference between extremists and moderates is modeled to measure their similarity degree. From this model, for every moderate, the extremists are divided into two groups: homogeneous group and heterogeneous group. Finally, the risk preference evolution model is structured by considering that moderates change …their risk preference dynamically according to their initial preference, their attitude towards the homogeneous groups, and the heterogeneous groups. Finding from data analysis shows that moderates with high acceptance toward the influence of extremists are more likely to reach group consensus. It is also found that the preference trend of moderates with a certain degree of acceptance toward heterogeneous groups fluctuates with a ‘W’ shape. This study bridges the gap between opinion dynamics and group decision making. Meanwhile, the model inspires new explanations and new perspectives for the group consensus process. Show more

Keywords: Extremists, opinion dynamics, group emergency decision-making, group consensus, risk preference evolution

DOI: 10.3233/JIFS-201106

Citation: Journal of Intelligent & Fuzzy Systems, vol. 39, no. 5, pp. 7733-7746, 2020