Journal of Intelligent & Fuzzy Systems - Volume 41, issue 2

Authors: Farwa, Shabieh | Kamran, Muhammad | Sarwar, Sundas | Kazmi, Maedah | Ahmad, Hijaz | Gepreel, Khaled A.

Article Type: Research Article

Abstract:  In this work, bipolar fuzzy parameterized sets in conjunction with soft sets are studied. This research focuses on the application of bipolar fuzzy parameterized soft sets (BFPSS ), arising from association of bipolar fuzzy parameterized sets with soft sets. Some useful operations and fundamental properties of BFPSS are presented. Mainly, we aim to design a novel and comparatively labour-saving algorithm to see the efficacy of BFPSS . We discuss an application of our algorithm in pharmaceutical decision making problem based on effectiveness and harmfulness of certain drugs. However, the algorithm is equally applicable in other decision making environments as …well where BFPSS arise. By preserving the structural implication of BFPSS , we compare our technique with a most recent algorithm to prove the significance of our method. Show more

Keywords: Fuzzy sets, bipolar fuzzy sets, soft sets, bipolar fuzzy parameterized soft sets, decision making

DOI: 10.3233/JIFS-202685

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2813-2821, 2021

Authors: Zhao, Yifan | Tian, Shuicheng

Article Type: Research Article

Abstract: In order to overcome the problems of low recognition rate and long recognition time existing in traditional methods, a method for identifying hidden disaster factors in coal mines based on Naive Bayes algorithm was proposed. The posterior probability of Bayesian network is calculated to obtain the maximum value of the posterior probability, so as to judge the categories of hidden disaster factors in coal mines. The method of combining soft and hard threshold functions is used to denoise Naive Bayes network. Combined with the structural equation of coal mine concealed disaster-causing factors, the index weight of coal mine disaster-causing factors …is calculated, and a fast identification model of disaster-causing factors is built to complete the identification. Experimental results show that the quality factors of the proposed method are all higher than 8, the recognition rate is as high as 98%, and the recognition time is basically controlled within 0.8 s. Show more

Keywords: Naive bayes algorithm, coal mine, hidden disaster factors, identification

DOI: 10.3233/JIFS-202726

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2823-2831, 2021

Authors: Fan, Jianping | Wang, Shuting | Wu, Meiqin

Article Type: Research Article

Abstract: Failure modes and effects analysis (FMEA) is a useful reliability analysis technique to identify potential failure modes in a wide range of industries. However, the conventional FMEA method is deficient in dealing with the risk evaluation and prioritization method. To overcome the shortcomings, this paper presents a new risk priority model using Best-Worst Method based on D numbers (D-BWM) and the Measurement of Alternatives and Ranking according to COmpromise Solution based on D numbers (D-MARCOS). First, D numbers are used to deal with the uncertainty of FMEA team members’ subjective judgment. Second, the distance-based method is proposed to determine the …objective weight of each team member. Then, the D-BWM was used to determine the weight of risk factors. The combination rule of D number theory combined the evaluation information of multiple members into group opinions. Finally, D-MARCOS method is proposed to obtain the risk priority of the failure modes. An example and the results of comparative analysis show the method is effective. Show more

Keywords: Failure modes and effects analysis, D numbers, BWM, MARCOS

DOI: 10.3233/JIFS-202765

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2833-2846, 2021

Authors: Luo, Damei | Li, Zhaowen | Qu, Liangdong

Article Type: Research Article

Abstract: An information system (IS) is an important mathematical tool for artificial intelligence. A fuzzy probabilistic information system (FPIS), the combination of some fuzzy relations in the same universe which satisfies the probability distribution, can be seen as an IS with fuzzy relations. A FPIS overcomes the shortcoming that rough set theory assumes elements in the universe with equal probability and leads to lose some useful information. This paper integrates the probability distribution into the fuzzy relations in a FPIS and studies its reduction. Firstly, the concept of a FPIS is introduced and its reduction is proposed. Then, the fuzzy relations …in a FPIS are divided into three categories (P -necessary, P -relatively necessary and P -unnecessary fuzzy relations) according to their importance. Next, entropy measurement for a FPIS is investigated. Moreover, some reduction algorithms are constructed. Finally, an example is given to verify the effectiveness of these proposed algorithms. Show more

Keywords: Fuzzy relation, FPIS, reduction, core, uncertainty, entropy, algorithm

DOI: 10.3233/JIFS-202783

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2847-2863, 2021

Authors: Zhang, Nan | Sheng, Yuhong | Zhang, Jing | Wang, Xiaoli

Article Type: Research Article

Abstract: In uncertainty theory, parameter estimation of uncertain differential equation is a very important research direction. The parameter estimation of multifactor uncertain differential equation needs to be solved. Multifactor uncertain differential equation is a differential equation driven by multiple Liu processes. The paper introduces two methods to solve the unknown parameters of the multifactor uncertain differential equation, they are the method of moment estimation and the method of least squares estimation. Several numerical examples are used to illustrate the proposed parameter estimation methods.

Keywords: Uncertainty theory, multifactor uncertain differential equation, parameter estimation

DOI: 10.3233/JIFS-202891

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2865-2878, 2021

Authors: Moradi Zirkohi, Majid | Lin, Tsung-Chih

Article Type: Research Article

Abstract: Interval type-2 fuzzy logic systems (IT2FLSs) have better abilities to cope with uncertainties in many applications. One major drawback of IT2FLSs is the high computational cost of the iterative Karnik-Mendel (KM) algorithms in type-reduction (TR). From the practical point of view, this prevents using IT2FLS in real-world applications. To address this issue, a novel non-iterative method called Moradi-Zirkohi-Lin (MZL) TR method is proposed for computing the centroid of an IT2FLS. This makes the practical implementation of the IT2FLSs simpler. Comparative simulation results show that the proposed method outperforms the KM TR method in terms of computational burden. Besides, closer results, …in terms of accuracy, to the KM TR method among the existing non-iterative TR methods are also achieved by the proposed TR method. Show more

Keywords: Karnik-Mendel (KM) algorithms, type-reduction, non-iterative, the centroid of an interval type-2 Fuzzy Set

DOI: 10.3233/JIFS-202913

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2879-2889, 2021

Authors: Venkataramanan, C. | Ramalingam, S. | Manikandan, A.

Article Type: Research Article

Abstract: Smart farming is one of the immense applications of Wireless Sensor Networks (WSN). Still, most of the researches have been focusing on precision agriculture using WSNs. In general, the nodes within the wireless sensor systems are self-configured. Based on the application requirement, gadgets within the region of interest collect data, prepare it, and send it to the recipient. The biggest impediments to these sensor systems are collision, restricted battery, and transmission capacity. Due to these characteristics, the node battery depletes earlier, when it starts working. Currently, agriculture depends on rain due to the lack of water resources and irrigation services. …The crop development depends totally on the factors of water, the climatic conditions of the soil, etc. In large-scale agriculture, it is exceptionally problematic to analyze all the parameters accurately throughout the growing field. In this article, high-precision architecture for large-scale agriculture has been proposed. An IoT (Internet of Things) enabled WSN has been built and installed in the respective areas to measure the physical quantities regularly. In addition, Lévy-Walk Bat (LWBA) algorithm has been proposed to optimize the collected data. The prediction accuracy of the collected data is evaluated by LWBA and then, it is compared with the existing optimization algorithms with different error solvers. It has provided the exact information regarding the whole landscape and it will help the farmers to irrigate precisely. Show more

Keywords: Data prediction, error minimization, IoT, regression, machine learning, optimization, smart agriculture, SVM, WSNs

DOI: 10.3233/JIFS-202953

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2891-2904, 2021

Authors: Cen, Shixin | Yu, Yang | Yan, Gang | Yu, Ming | Kong, Yanlei

Article Type: Research Article

Abstract: As a spontaneous facial expression, micro-expression reveals the psychological responses of human beings. However, micro-expression recognition (MER) is highly susceptible to noise interference due to the short existing time and low-intensity of facial actions. Research on facial action coding systems explores the correlation between emotional states and facial actions, which provides more discriminative features. Therefore, based on the exploration of correlation information, the goal of our work is to propose a spatiotemporal network that is robust to low-intensity muscle movements for the MER task. Firstly, a multi-scale weighted module is proposed to encode the spatial global context, which is obtained …by merging features of different resolutions preserved from the backbone network. Secondly, we propose a multi-task-based facial action learning module using the constraints of the correlation between muscle movement and micro-expressions to encode local action features. Besides, a clustering constraint term is introduced to restrict the feature distribution of similar actions to improve categories’ separability in feature space. Finally, the global context and local action features are stacked as high-quality spatial descriptions to predict micro-expressions by passing through the Convolutional Long Short-Term Memory (ConvLSTM) network. The proposed method is proved to outperform other mainstream methods through comparative experiments on the SMIC, CASME-I, and CASME-II datasets. Show more

Keywords: Micro-expression recognition, multi-scale weighted module, facial action learning module, spatiotemporal network

DOI: 10.3233/JIFS-202962

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2905-2921, 2021

Authors: Liu, Liming | Li, Ping | Chu, Maoxiang | Gao, Chuang

Article Type: Research Article

Abstract: Basic oxygen furnace (BOF) steelmaking plays an important role in steelmaking process. Hence, it is necessary to study BOF steelmaking modeling. In this paper, a novel regression algorithm is proposed by using nonparallel support vector regression with weight information (WNPSVR) for the end-point prediction of BOF steelmaking. The weight information is excavated by K -nearest neighbors (KNNs) algorithm. Since the whale optimization algorithm (WOA) has the characteristics of fast convergence speed and a few adjustment parameters, WOA is applied to optimize the parameters in the objective function of WNPSVR. Compared with traditional prediction models, WNPSVR-WOA is not easy to fall …into local minimum values and is insensitive to noise. Thus, the prediction and control of molten steel end-point information are more accurate. Experimental results verify the effectiveness and feasibility of the proposed model. Within different error bounds (0.005 wt.% for carbon content model and 10°C for temperature model), the hit rates of carbon content and temperature are 89% and 95%, respectively. Meanwhile, a double hit rate of 85% is achieved. The above results conclude that our WNPSVR-WOA has important reference value for actual BOF application and can improve the steel product quality. Moreover, WNPSVR-WOA can also be used to other fields. Show more

Keywords: Basic oxygen furnace, end-point information prediction, nonparallel support vector regression, weight information, whale optimization algorithm

DOI: 10.3233/JIFS-210007

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2923-2937, 2021

Authors: Jyothi, R.L. | Rahiman, M. Abdul

Article Type: Research Article

Abstract: Binarization is the most important stage in historical document image processing. Efficient working of character and word recognition algorithms depend on effective segmentation methods. Segmentation algorithms in turn depend on images free of noises and degradations. Most of these historical documents are illegible with degradations like bleeding through degradation, faded ink or faint characters, uneven illumination, contrast variation, etc. For effective processing of these document images, efficient binarization algorithms should be devised. Here a simple modified version of the Convolutional Neural Network (CNN) is proposed for historical document binarization. AOD-Net architecture for generating dehazed images from hazed images is modified …to create the proposed network.The new CNN model is created by incorporating Difference of Concatenation layer (DOC), Enhancement layer (EN) and Thresholding layer into AOD-Net to make it suitable for binarization of highly degraded document images. The DOC layer and EN layer work effectively in solving degradation that exists in the form of low pass noises. The complexity of working of the proposed model is reduced by decreasing the number of layers and by introducing filters in convolution layers that work with low inter-pixel dependency. This modified version of CNN works effectively with a variety of highly degraded documents when tested with the benchmark historical datasets. The main highlight of the proposed network is that it works efficiently in a generalized manner for any type of document images without further parameter tuning. Another important highlight of this method is that it can handle most of the degradation categories present in document images. In this work, the performance of the proposed model is compared with Otsu, Sauvola, and three recent Deep Learning-based models. Show more

Keywords: Binarization, historical document images, degradation, difference of concatenated convolutions, enhancement layer

DOI: 10.3233/JIFS-210015

Citation: Journal of Intelligent & Fuzzy Systems, vol. 41, no. 2, pp. 2939-2952, 2021