Purchase individual online access for 1 year to this journal.
Price: EUR 250.00
ISSN 1051-9815 (P)
ISSN 1875-9270 (E)
Impact Factor 2024: 1.7
WORK: A Journal of Prevention, Assessment & Rehabilitation is an interdisciplinary, international journal which publishes high quality peer-reviewed manuscripts covering the entire scope of the occupation of work. The journal's subtitle has been deliberately laid out: The first goal is the prevention of illness, injury, and disability. When this goal is not achievable, the attention focuses on assessment to design client-centered intervention, rehabilitation, treatment, or controls that use scientific evidence to support best practice.
WORK occasionally publishes thematic issues, but in general, issues cover a wide range of topics such as ergonomic considerations with children, youth and students, the challenges facing an aging workforce, workplace violence, injury management, performing artists, ergonomic product evaluations, and the awareness of the political, cultural, and environmental determinants of health related to work.
Dr. Karen Jacobs, the founding editor, and her editorial board especially encourage the publication of research studies, clinical practice, case study reports, as well as personal narratives and critical reflections of lived work experiences (autoethnographic/autobiographic scholarship),
Sounding Board commentaries and
Speaking of Research articles which provide the foundation for better understanding research to facilitate knowledge dissemination.
Narrative Reflections on Occupational Transitions, a new column, is for persons who have successfully transitioned into, between, or out of occupations to tell their stories in a narrative form. With an internationally renowned editorial board,
WORK maintains high standards in the evaluation and publication of manuscripts. All manuscripts are reviewed expeditiously and published in a timely manner.
WORK prides itself on being an author-friendly journal.
WORK celebrates its 25th anniversary in 2015.
*WORK is affiliated with the Canadian Association of Occupational Therapists (CAOT)* *WORK is endorsed by the International Ergonomics Association (IEA)* *WORK gives out the yearly Cheryl Bennett Best Paper Award*
Abstract: The causes of occupational accidents from the perspective of human factors have been a subject which has received little attention into the field of scientific research. The aim of this research was to identify and classify the human factors that influence human errors and failures that cause accidents and injuries specifically on hands. Available studies related to the topic have been developed mainly for aerospace applications and are found insufficient to explain accidents causalities in the manufacturing industry. This research was developed in the assembly industry of automotive harnesses and was conducted following a mixed Cognitive Anthropological approach. This study…was developed in two phases. During the first qualitative phase, participants freely listed their knowledge to identify elements of the cultural domain, then and in the second phase they performed the successive pile sort technique for the collection data to classify elements in the cultural domain. Statistical models like Cluster Analysis and Multidimensional Scaling were applied for results’ validation purposes. As results, 70 different human factors were identified and in the second phase they were classified into 4 main categories which were: human error, unsafe conditions, individual factors, and organizational factors. Statistical methods validated these results.
Show more
Abstract: This paper shows the general design conditions about ergonomics and safety for control centers in the petrochemical process industry. Some of the topics include guidelines for the optimized workstation design, control room layout, building layout, and lighting, acoustical and environmental design. Also takes into account the safety parameters in the control rooms and centers design. The conditions and parameters shown in this paper come from the standards and global advances on this topic on the most recent publications. And also the work was supplemented by field visits of our team to the control center operations in a petrochemical company, and…technical literature search efforts. This guideline will be useful to increase the productivity and improve the working conditions at the control rooms.
Show more
Keywords: safety, control center, interface, architectural, ergonomics criteria, ergonomics arquitectural design, petrochemical industry
DOI: 10.3233/WOR-2012-0578-3164
Citation: Work,
vol. 41, no. Supplement 1, pp. 3164-3173, 2012
Abstract: Abstract Nanotechnologies is a multidisciplinary set of techniques to manipulate matter on nanoscale level, more precisely particles below 100 nm whose characteristic due to small size is essentially different from those found in macro form materials. Regarding to these new properties of the materials there are knowledge gaps about the effects of these particles on human organism and the environment. Although it still being considered emerging technology it is growing increasingly fast as well as the number of products using nanotechnologies in some production level and so the number of researchers involved with the subject. Given this scenario and based…on literature related, a comprehensive methodology for health and safety at work for researching laboratories with activities in nanotechnologies was developed, based on ILO structure guidelines for safety and health at work system on which a number of nanospecific recommendations were added to. The work intends to offer food for thought on controlling risks associated to nanotechnologies.
Show more
Abstract: A broadened version of the perceptual load model was utilized to explore systematically the influence of four variables on driver’s behavior: a. levels of load on the road; b. levels of load at the sides of the road; c. event’s initial location (on the road vs. at the sides of the road); and d. the presence and size of advertizing billboards. 18 participants participated in two experimental sessions in a driving simulator. One of the sessions contained advertizing billboards and the other session did not. The results indicated that billboards can have a considerable effect on various aspects of driving…like the time required responding to a potentially dangerous event or simply the number of accidents occurring during driving, but importantly the effect of billboards on driving was modulated by the levels of perceptual load.
Show more
Abstract: Unexpected sudden (un)loading of the trunk may induce inadequate responses of trunk muscles and uncontrolled trunk motion. These unexpected perturbations may occur in pushing tasks, when the cart suddenly starts moving (unloading) or is blocked by an obstacle (loading). In pushing, handle height affects the user’s working posture, which may influence trunk muscle activity and trunk movement in response to the perturbation. Eleven healthy male subjects pushed a 200 kg cart with handles at shoulder and hip height in a start condition (sudden release of brakes) and a stop condition (bumping into an obstacle). Before the perturbation, the baseline of…the trunk inclination, internal moment and trunk extensor muscle activity were significantly higher when pushing at hip height than at shoulder height. After the perturbation, the changes in trunk inclination and internal moment were significantly larger when pushing at shoulder height than at hip height in both conditions. The opposite directions of changes in trunk inclination and internal moment suggest that the unexpected perturbations caused uncontrolled trunk motion. Pushing at shoulder height may impose a high risk of low-back injury due to the low trunk stiffness and large involuntary trunk motion occurring after carts suddenly move or stop.
Show more
Abstract: The main focus of risk management is technical and rational analysis about the operational risks and by those imposed by the occupational environment. In this work one seeks to contribute to the risk perception study and to better comprehend how a group of occupational safety students assesses a set of activities and environmental agents. In this way it was used theory sustained by psychometric paradigm and multivariate analysis tools, mainly multidimensional scaling, generalized Procrustes analysis and facets theory, in order to construct the perceptual map of occupational risks. The results obtained showed that the essential characteristics of risks, which were…initially splited in 4 facets were detected and maintained in the perceptual map. It was not possible to reveal the cognitive structure of the group, because the variability of the students was too high. Differences among the risks analyzed could not be detected as well in the perceptual map of the group.
Show more
Abstract: Workplace accidents involving machines are relevant for their magnitude and their impacts on worker health. Despite consolidated critical statements, explanation centered on errors of operators remains predominant with industry professionals, hampering preventive measures and the improvement of production-system reliability. Several initiatives were adopted by enforcement agencies in partnership with universities to stimulate production and diffusion of analysis methodologies with a systemic approach. Starting from one accident case that occurred with a worker who operated a brakeclutch type mechanical press, the article explores cognitive aspects and the existence of traps in the operation of this machine. It deals with a large-sized…press that, despite being endowed with a light curtain in areas of access to the pressing zone, did not meet legal requirements. The safety devices gave rise to an illusion of safety, permitting activation of the machine when a worker was still found within the operational zone. Preventive interventions must stimulate the tailoring of systems to the characteristics of workers, minimizing the creation of traps and encouraging safety policies and practices that replace judgments of behaviors that participate in accidents by analyses of reasons that lead workers to act in that manner.
Show more
Abstract: This paper presents a case study which confirmed that the use of APJ for proper assessment of human error in the Electric Power Company of Serbia (hereinafter EPS). The proposal methodological framework was used for human error identification and quantification in the case of a repair intervention on a steel lattice tower 10/0.4 kV (jurisdiction of an EPS subsidiary ED “Jugoistok”, Nis, Serbia) which resulted in an accident with a fatal outcome. One of the aims of this study is to show the necessity of human error assessment not only in manufacturing industries but, as it will be shown in…this paper, in companies that distribute electric energy, as well.
Show more
Keywords: Human Error, Human Error Assessment, Absolute Probability Judgement, Risk Assessment, Industrial accident
DOI: 10.3233/WOR-2012-0584-3207
Citation: Work,
vol. 41, no. Supplement 1, pp. 3207-3212, 2012
Abstract: To be able to disseminate knowledge about maritime safety culture and safety management to different actors in the Swedish maritime sector, a preliminary pedagogical concept was developed and evaluated. As a first user group, students at upper secondary maritime schools were chosen and the pedagogical concept was adapted for this group. The concept includes an interactive prototype and a teacher’s guide and is based on a model for experience-based learning which connects theory and practice by a cyclic approach. The concept was tested in a classroom setting including interaction with the students and a follow-up one week later. A preliminary…evaluation of the results shows a very positive response among the students as well as the lecturers. The educational material was successful in immediately creating a relevant discussion about safety culture, and one week later, students could remember many of the safety scenarios included in the pedagogical concept.
Show more
Abstract: Learning from incidents is important for improving safety. Many companies spend a great deal of time and money on such learning procedures. The objectives of this paper are to present some early results from a project aimed at revealing weaknesses in the procedures for learning from incidents and to discuss improvements in these procedures, especially in chemical process industries. The empirical base comes from a project assessing organizational learning and the effectiveness of the different steps of the learning cycle for safety and studying relations between safety-specific transformational leadership, safety climate, trust, safety-related behavior and learning from incidents. The results…point at common weaknesses in the organizational learning, both in the horizontal learning (geographical spread) and in vertical learning (double-loop learning). Furthermore, the effectiveness in the different steps of the learning cycle is low due to insufficient information in incident reports, very shallow analyses of reports, decisions that focus at solving the problem only at the place where the incident took place, late implementations and weak solutions. Strong correlations with learning from incidents were found for all safety climate variables as well as for safety-related behaviors and trust. The relationships were very strong for trust, safety knowledge, safety participation and safety compliance.
Show more
Keywords: Learning from incidents, organizational learning, safety leadership, safety climate
DOI: 10.3233/WOR-2012-0661-3216
Citation: Work,
vol. 41, no. Supplement 1, pp. 3216-3222, 2012
Abstract: A case study investigation within a large UK university involving semi-structured stakeholder interviews, examined the organisation, coordination, and security within crowd events of various descriptions. Similarities in approaches and priorities emerged with crowd event organisation, primarily attention to safety requirements, in protecting crowd members, venue reputation, and legal obligations. Conversely, attention to and attitudes and beliefs surrounding user experience, crowd comfort and satisfaction, were often based on personal judgment, and appeared to be influenced by budget considerations. The findings suggest a lack of knowledge and usable evidence based guidance for planning crowd events in relation to important aspects affecting participant…satisfaction.
Show more
Keywords: Crowds, Crowding, User experience, Satisfaction
DOI: 10.3233/WOR-2012-0586-3223
Citation: Work,
vol. 41, no. Supplement 1, pp. 3223-3226, 2012
Abstract: The study investigated the role of recovery and detachment in the break period between two shifts for fatigue in the current shift. A time-based paper-and-pencil diary study was carried out observing sixty-four railway controllers over ten consecutive working shifts. The results demonstrated that fatigue in the current shift was not only affected by recovery and psychological detachment during break phases before a shift, but also by fatigue at shift onset and perceived workload during the shift.
Abstract: The aim of this paper is to describe an ongoing project with the aim of improving safety in an organization working with maintenance and development of the railway infrastructure in Sweden. The first sub goal was to investigate the Genta method, with 62 employees resulted in a description of these latent errors in the organization.eral Failure Types in the organization. Seminars and interviews, based on the Tripod Del Recommendations for an improvement toward a safety culture was suggested, action plans were formulated and, in some cases, implemented. A follow up study is planned in a two year perspective.
Abstract: Into dangerous and complex systems with high degree of interactivity between its components, the variability is present at all time, demanding a high degree of control of its operation. Maintaining or recovering the normality, when the system is under some stress (instability) is a function of Resilience. To cope with prevention, forecast, recovery and with memory of experiences from learned lessons requires some features from the companies. This paper purposes a structure that enables the Total Resilience of a system production that defines the assignments for Workers, Designers and Management Team, according to its features and possibilities. During one year…and a half developing studies on ergonomics area of a Brazilian Oil Refinery, several situations were observed and studied using Work Ergonomic Analysis. These situations show actions and strategies that workers use to maintain the system stability. Furthermore, they revealed the importance that these actions are stored in a database of learned lessons from the Company. The research resulted in a broad scheme. It places each of these groups in the process of Total Resilience. It also shows the human like a center of actions that ensure the continuity of the system, main element at Resilience (Anthropocentric View).
Show more
Abstract: This study analyzes an accident in which two maintenance workers suffered severe burns while replacing a circuit breaker panel in a steel mill, following model of analysis and prevention of accidents (MAPA) developed with the objective of enlarging the perimeter of interventions and contributing to deconstruction of blame attribution practices. The study was based on materials produced by a health service team in an in-depth analysis of the accident. The analysis shows that decisions related to system modernization were taken without considering their implications in maintenance scheduling and creating conflicts of priorities and of interests between production and safety; and…also reveals that the lack of a systemic perspective in safety management was its principal failure. To explain the accident as merely non-fulfillment of idealized formal safety rules feeds practices of blame attribution supported by alibi norms and inhibits possible prevention. In contrast, accident analyses undertaken in worker health surveillance services show potential to reveal origins of these events incubated in the history of the system ignored in practices guided by the traditional paradigm.
Show more
Keywords: occupational accidents, accident prevention, accident investigation, surveillance system
DOI: 10.3233/WOR-2012-0590-3246
Citation: Work,
vol. 41, no. Supplement 1, pp. 3246-3251, 2012
Abstract: This study reviews the academic literature on human reliability from the ergonomics perspective. The methodological approach used in this analysis combines several techniques, including bibliometric, content analysis, and social network analysis. The initial sample consisted of 304 articles, which totalized 1,872 citations, published in 94 journals, from the 47-year period between 1963 and 2011. From this initial sample, only 50 articles (16%), totalizing 471 citations are classified as ergonomics area, published in 14 journals, which involve 108 authors, with 471 citations. This sample was expanded via the seminal studies of ergonomics. These articles were coded and tabulated according to their…year of publication, the number of publications per journal, major areas of interest, and the relationship between the articles and the research methods discussed. Networks were prepared by keywords, co-citations, and cross-citations.
Show more
Keywords: human reliability, bibliometric, content analysis, social networks
DOI: 10.3233/WOR-2012-0591-3252
Citation: Work,
vol. 41, no. Supplement 1, pp. 3252-3259, 2012
Abstract: The auditory channel is one of the most affected by the activity of musicians. The aim of this study was to verify the efficiency of the Monitor of Hearing In Ear regarding prevention of the hearing loss in the activity realized by musicians. This study justifies by the need to verify a possible method of protection for these professionals. It was analyzed a group of 10 musicians of a band of dance of Santa Catarina. The methods of research were questionnaires, audiometry and analysis of the technical specifications of Monitors of Hearing In Ear. The population investigated are aged between…18–56, and time in the profession between 37 and 0,4 years. The exhibition is of, roughly, 12 hours a week during the presentations, 4,5 hours a week rehearsing in group and from 1 to 8 weekly hours of isolated rehearsal. It was observed that 40% of the population presented normal hearing thresholds for left and right ear, the sensorineural hearing loss in the left ear was ascertained in 40% and 20% presented sensorineural hearing loss in both ears. The advantage of the Monitor of Hearing In Ear is that there is the blocking of the undesirable sounds, making possible a greater audible reduction, generally between 25 and 40 dB, showing possibility to be considered a half of protection for professional musicians.
Show more
Keywords: Sound Pressure Level, Hearing Disorders, In ear monitor
DOI: 10.3233/WOR-2012-0592-3260
Citation: Work,
vol. 41, no. Supplement 1, pp. 3260-3268, 2012
Abstract: Facing an increasing violence level and higher firepower in the hands of criminal organizations (especially those related to drug trafficking), the Military Police of Pernambuco has created, in 1989, the “1a Companhia Independente de Operações Especiais” (1st Independent Company of Special Operations), as a tactical last resort of the Police to be used on special, complex situations. The CIOE progressively makes use of Negotiation measures, of less-than-lethal maneuvers, of Precision Shots and Tactical Assaults. When all possibilities are drained, the Precision Shot will bring the crisis perpetrator down. This study had as an objective to assess the level…of impact noise suffered by the elite snipers of the 1st CIOE-PE in their training. The working conditions of the snipers were evaluated through the use of a semi-structured questionnaire. Noise measuring was done on four (4) .308 IMBEL AGLC (with ammo from the same lot) rifles. Six (6) shots were fired off each gun, separated by a 30-second pause. In the end, it has been concluded that the noise level the 1st CIOE snipers are submitted to is considered to be normal by Brazilian legislation.
Show more
Keywords: occupational assessment on noise, police snipers, firearms
DOI: 10.3233/WOR-2012-0593-3269
Citation: Work,
vol. 41, no. Supplement 1, pp. 3269-3276, 2012
Abstract: This paper focuses on the reality of very small and small enterprises (VSSEs) in Brazil, concerning health and safety management of their workers. These companies tend to operate in a few administrative levels. The owners’ health and safety culture is fundamental for the implementation of preventive measures. The VSSEs end up adopting merely reactive and under-the-law actions. In order to understand such reality, a questionnaire was elaborated especially for the reasearch made. Fiftyfive very small and small enterprises of the industrial, commercial and service sectors were selected. The research confirmed the reactive attitude shown by the VSSEs, thus demonstrating that…none of the companies involved presented policies of safety and health. Even though not holding policies, programs or scopes of their activities, 22% of them revealed to have a clear definition of the responsibilities of their high level administration. Nevertheless, 10% had financial resources allocated to this sector. Such companies do not count on a frequent safety and health support. The ignorance on it leads them to take a reactive action. This study reaches its objective on contributing to the debate, besides indicating that the way to improvement is on the strict cooperation between governments, companies, workers and society.
Show more
Keywords: Very Small and Small Enterprises, Safety Management and Health, Health and Safety Culture
DOI: 10.3233/WOR-2012-0594-3277
Citation: Work,
vol. 41, no. Supplement 1, pp. 3277-3283, 2012
Abstract: This paper presents the results of an ergonomic intervention conducted within a blast furnace plant. As part of its risk prevention program, the company decided to set up an action plan, in a participatory manner, by setting up working groups to solve health & safety issues. This field mission involved 230 employees, 80 of whom participated actively by being incorporated into working groups. After four months of intervention, a questionnaire survey has been conducted among employees to study the effects of participation on the safety climate. The results seem promising and show that the benefits of participation are numerous: a…more positive safety climate associated to safer attitudes and behaviors. However, rather than just participation, it seems to be the employee involvement in the working groups and the satisfaction they derive from their participation that guarantee these positive results. Hence, participatory ergonomics seems to be an effective way to decrease the number of unsafe behaviors at work, provided that the type of participation has been previously well defined and organized according to the specific context of each organization.
Show more
Abstract: The objective of this work is to map, in a limited area inside and outside of the worksite, the environmental impact generated by sound pollution coming from the driving of foundation piles for high rise buildings, as well as to observe and check if the noise levels produced by the emitting source are tolerable in the urban environment. The methodology of the work includes a survey of technical references about the subject; measurement of noises surrounding the worksite during the foundation phase for four distinct buildings, with different types of piles: prefabricated piles, continuous helical displacement piles , traditional compaction…piles and Terra Probe compaction piles. A grid of points was built due to the time of driving and after that the measurements of environmental noises were performed emitted by the execution of each type of pile using a sound level meter. The interpretation of the measurements and their impacts on the neighborhood of the building were performed using the computational tool Suffer for creating noise level contours. The X and Y axes of the grid represent the distances in meters of the area studied and the Z axis represents the noise measured in dB. The contours developed represent the mapping of the noise at the worksites and their surroundings. The mapping of the urban impact of noise, the measurement of its dimensions, and the examination of its propagation around the building are important subsides to adequate individual and collective protection procedures. Seventy one points were measured at four building sites with different types of piles, and the results showed that at only three points was the noise within the limits of the Municipal Law of Recife of 70 dB, which proves the relevance of the research. Finally, the comparative analysis between the four types of piles shows that the continuous helical displacement pile emits the lowest noise level among the four pile types studied.
Show more
Abstract: This paper introduces the Ergonomic Work Analysis as a relevant instrument to identify the risks in occupational environments through the investigation of factors that influence the relationship between the worker and the productive process. It draws a parallel between the several aspects of risk identification in traditional tools of Health and Safety Management and the factors embraced by the Ergonomic Work Analysis, showing that the ergonomic methodology is able to go deeper in the scenarios of possible incident causes. This deepening enables the establishment of a relationship between the work context and the upcoming damage to the physical integrity of…the worker. It acts as a complementary instrument in the traditional approach to the risk management. In order to explain the application of this methodology in a preventive way, it is presented a case study of a coal mill inspector in a siderurgic company.
Show more
Keywords: Ergonomic Work Analysis, Risk Management, Occupational Health and Safety System
DOI: 10.3233/WOR-2012-0597-3301
Citation: Work,
vol. 41, no. Supplement 1, pp. 3301-3307, 2012
Abstract: The creation of meaning in communication is a trading activity, resulting from the construction that is born of the interaction between subjects. That is, the meaning is not inherent to the relationship between words, signs and symbols that arise from negotiating a necessary and unavoidable. As the concepts of sense as discrete and static representations imply a notion of classical computing and design of a cognitive system corresponding conceptions of meaning construction as located and shared among agents implies notions of different computing and cognition. Several efforts have been developed to meet these demands. Among them are the Connectionism (also…known as neural networks. Records on aspects of mental health and stress of flight professionals are present in the official reports of the organs of investigation of aviation accidents worldwide since its inception. Problems related to health physical and mental health of pilots (fatigue, stress, physiological and psychosocial problems) account for 19% of causal factors in aircraft accidents. The training seems a paradox when we know that these professionals receive regular training, have high education and technical training of high level. However, problems arise related to the implementation of learning that can be influenced to reduce their cognitive capacity, making it in practice, relatively unable to exercise its functions effectively and safely.
Show more
Keywords: Distributed cognition, Automation, Behavior of mind
DOI: 10.3233/WOR-2012-0598-3308
Citation: Work,
vol. 41, no. Supplement 1, pp. 3308-3312, 2012
Abstract: This research aims to make a comparative evaluation of three different parachuting harnesses to work at heights in the energy industry, from the electricians’ point of view concerning these products under the optics of usability and ergonomic principles, and mainly justified by the high quantity of injuries at the energy industry due to high falls. According to its main target, this field research is classified as exploratory-descriptive transversal viewing study and, considering this perspective, the study was developed in four steps. Research results have enlightened the weakest spots and the potential improvement opportunities of these products, developed to assure safety…of the work at heights to the energy industry, according to the opinion of the users. Still, results point that, regardless of the model, these devices have adapting issues to fulfill the electrical sector user’s needs.
Show more
Keywords: Electricity sector, parachuting harnesses, work at heights, energy distribution grids
DOI: 10.3233/WOR-2012-0599-3313
Citation: Work,
vol. 41, no. Supplement 1, pp. 3313-3320, 2012
Abstract: Work equipment and installations with a high risk for health and safety of employees should be paid a special attention. The German Product Safety Act, which is aimed to manufacturers or distributors in order to protect consumers, maintains a conclusive catalogue of these so-called “installations in need of monitoring” fixing the work equipment and installations for which such special inspections can be demanded. This catalogue has remained unchanged for decades and has been transformed nearly unmodified into the Plant Safety Ordinance. Currently, there is a discussion about this catalogue in Germany. A major point of concern is the definition and…the significance of “especially” dangerous work equipment and installations. Two recent research projects are dealing with the problem how to define “especially”.
Show more
Keywords: work equipment, installations, risk assessment, general inspections, work safety, Product Safety Act
DOI: 10.3233/WOR-2012-0600-3321
Citation: Work,
vol. 41, no. Supplement 1, pp. 3321-3324, 2012
Abstract: This paper aims to identify conflicts and gaps between the operators’ strategies and actions and the organizational managerial approach for human reliability. In order to achieve these goals, the research approach adopted encompasses literature review, mixing action research methodology and Ergonomic Workplace Analysis in field research. The result suggests that the studied company has a classical and mechanistic point of view focusing on error identification and building barriers through procedures, checklists and other prescription alternatives to improve performance in reliability area. However, it was evident the fundamental role of the worker as an agent of maintenance and construction of system…reliability during the action research cycle.
Show more
Keywords: Human Reliability, Error Identification, Ergonomic Workplace Analysis, Resilience engineering
DOI: 10.3233/WOR-2012-1034-3325
Citation: Work,
vol. 41, no. Supplement 1, pp. 3325-3332, 2012
Abstract: The aim of this study was to evaluate the effect of shoe type on the performance of women during curb descent. Performance during curb stepping may be explained by biomechanical research that has evaluated the kinematics of overground walking and stair ascent and descent. Studies have reported that women exhibit performance differences when wearing high heels, flip flops and sneakers during overground walking and stair ascent and descent. Thus, in addition to features of the curb, the type of shoe being worn may also affect performance. Although several studies have investigated curb stepping, no known studies have investigated the effects…of different types of footwear on curb descent performance. This research was conducted in a real-world environment where participants wore three different types of shoes and performed a series of activities that involved curb stepping. The subjects were videotaped while descending a curb, allowing for observation of changes in gait parameters. Results of this study indicate that wearing high heels leads to performance differences as compared to wearing flip flops or sneakers.
Show more
Keywords: walking, real-world environment, single step, shoes
DOI: 10.3233/WOR-2012-0601-3333
Citation: Work,
vol. 41, no. Supplement 1, pp. 3333-3338, 2012
Abstract: Many fatal accidents due to falling from height have happen at construction sites in Japan. The purpose of this study is about to seek new prevention methods of fatal accidents due to falling. For the first step, this study was carried out to find out “cause of death” in labor accidents by using past statistics data and was analyzed it. For the second, Butt dropping tests were carried out to measure impact load and acceleration of human head and neck by using simplified human model. After that, relationship between the human injury probability and the fall height was discussed by…comparing with experimental results and some impact tolerance values for human. From the results of this study, impact force might be able to head trauma involved not only skull fracture but also cervical spinal cord injury. These results suggest needs to explore new protection equipment for head and cervical injuries prevention.
Show more
Keywords: Labor accident, falling accident, head and neck injury, impact force and acceleration
DOI: 10.3233/WOR-2012-0602-3339
Citation: Work,
vol. 41, no. Supplement 1, pp. 3339-3342, 2012
Abstract: Precise measurement of stairway geometry is important in order to establish whether a stairway meets design goals, standards and codes. The Traditional method of measuring risers and runs (goings) does not measure the stairs in the way that codes define risers and runs, and does not measure the stairs in the way users experience them. The Nose-to-Nose method does. This study was conducted to determine the validity and repeatability of this method. Two researchers used this method to study the risers and runs on two separate stairways, one carpeted and the other not. Results demonstrated a high degree of validity…and repeatability.
Show more
Abstract: Slip and fall incidences are common in our daily lives. They are not only important environmental safety issues but also important occupational safety and health problems. The purpose of this study was to use the Brungraber Mark II to measure the friction so as to investigate the effects of the shoe sole, surface condition and the inclined angle of the floor and their interactions on friction coefficient. The results of the study showed the effects of all the main factors and their interactions were significant (p<0.001). Engineering designs & ergonomic interventions in slip & fall prevention should take these factors…in full consideration.
Show more
Keywords: slips & falls, friction measurements, tread design, contamination
DOI: 10.3233/WOR-2012-0604-3349
Citation: Work,
vol. 41, no. Supplement 1, pp. 3349-3351, 2012
Abstract: The objective of the current study was to evaluate the effect of walkway perturbation training on human dynamic walking stability and slip propensity. A new walkway perturbation training program was developed using an instrumented, split-belt treadmill. Walkway surface perturbation was composed of multiple, randomized perturbation pulses. Each pulse was created by sudden accelerating the treadmill belt underneath the dominant foot briefly. Five healthy older adults were involved in a laboratory study. An inertial measurement unit was attached to the subject’s low back region to record 3D acceleration. Maximum Lyapunov exponent (maxLE) and transitional acceleration of whole body center of mass…(TA_COM) were computed to quantify the local dynamic stability and slip propensity, respectively. The results indicated a significant training effect on both maxLE and TA_COM. It was concluded that the walkway perturbation training program significantly improved local dynamic stability and reduced slip propensity.
Show more
Keywords: fall prevention, perturbation training, acceleration, dynamic stability
DOI: 10.3233/WOR-2012-0605-3352
Citation: Work,
vol. 41, no. Supplement 1, pp. 3352-3354, 2012
Abstract: The measurement of walkway slip resistance is required to assess the risk of slipping. Unlike other countries, the U.S. has not decided upon a single approach to the measurement of slip resistance. Several types of tribometers are available to measure slip resistance however, the measured value of the slip resistance of a given surface has been found to be tribometer specific. The introduction of ASTM International Standard F2508 Standard Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces, has produced a method which allows validation of each type of tribometer and the values generated during testing.
Abstract: Falls near the bottom of a flight of stairs have resulted from an illusion that the person was stepping off onto the bottom landing when the person was still two treads or more above the landing. The illusion is caused by poor lighting and design defects built into the stairway. The poor lighting may be attributed to a building code that allows inadequate lighting near the bottom of external stairs in private residences. The design defect of truncating handrails before they reach the bottom tread may be due to confusion between “guards” and “handrails” and this confusion also appears to…be promulgated by building code.
Show more
Keywords: Stairs, handrails, guards, falls, lighting, design
DOI: 10.3233/WOR-2012-0607-3358
Citation: Work,
vol. 41, no. Supplement 1, pp. 3358-3362, 2012
Abstract: The available coefficient of friction (ACOF) for human locomotion is the maximum coefficient of friction that can be supported without a slip at the shoe and floor interface. A statistical model was introduced to estimate the probability of slip by comparing the ACOF with the required coefficient of friction, assuming that both coefficients have stochastic distributions. This paper presents an investigation of the stochastic distributions of the ACOF of quarry tiles under dry, water and glycerol conditions. One hundred friction measurements were performed on a walkway under the surface conditions of dry, water and 45% glycerol concentration. The Kolmogorov-Smirnov goodness-of-fit…test was used to determine if the distribution of the ACOF was a good fit with the normal, log-normal and Weibull distributions. The results indicated that the ACOF appears to fit the normal and log-normal distributions better than the Weibull distribution for the water and glycerol conditions. However, no match was found between the distribution of ACOF under the dry condition and any of the three continuous distributions evaluated. Based on limited data, a normal distribution might be more appropriate due to its simplicity, practicality and familiarity among the three distributions evaluated.
Show more
Keywords: Available coefficient of friction, footwear and floor interface, stochastic distribution
DOI: 10.3233/WOR-2012-0608-3363
Citation: Work,
vol. 41, no. Supplement 1, pp. 3363-3366, 2012
Abstract: This is a review of walking tasks in the railroad environment, and the injuries that result from slips, trips, falls, or other acute or even non-traumatic exposures. The lack of federal regulations for railroad walkways has led several states to develop and enforce their own regulations. Support from the research literature for such regulations has come from biomechanical studies of the effects of walking on railroad ballast, which will be reviewed.
Keywords: Railroads, ballast, falls, biomechanics, balance
DOI: 10.3233/WOR-2012-0609-3367
Citation: Work,
vol. 41, no. Supplement 1, pp. 3367-3371, 2012
Abstract: Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants – generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants…may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.
Show more
Abstract: In an experimental study two levels of oculomotor load were induced via optical trial lenses. Trapezius muscle activity was measured with bipolar surface electromyography and normalized to a submaximal contraction. Sixty-six subjects with a median age of 36 (range 19–47, std 8) viewed a black and white Gabor grating (5 c/deg) for two 7-min periods monocularly through a 0 D lens or binocularly through -3.5 D lenses. The effect of time was separately regressed to EMG in two different subgroups of responders: a High-Oculomotor-Load (HOL) and a Low-Oculomotor-Load (LOL) group. A linear regression model was fitted on group level with…exposure time on the x-axis and normalized trapezius muscle EMG (%RVE) on the y-axis. The slope coefficient was significantly positive in the -D blur condition for only the HOL subgroup of responders: 0.926 + Timemin 1-7 × 0.088 (p = 0.002, r2 =0.865). There was no obvious sign of this activity to level off or to stabilize. These results suggest that professional information technology users that are exposed to a high level of oculomotor load, during extended times, are at an increased risk of exhibiting an increased trap.m. activity.
Show more
Keywords: Accommodation, Computer work, EMG recordings, Eye movements, Motor control, Near work
DOI: 10.3233/WOR-2012-0611-3379
Citation: Work,
vol. 41, no. Supplement 1, pp. 3379-3384, 2012
Abstract: A functionally optimized housing development designed to meet the demands in different phases of living (universal design) may result in the elderly living longer in their own homes. In this study a total of 165 healthy persons were included out of a total of approximately 320 persons turning 75 years of age in 2009 living in Drammen municipality. They went through a quantitative, questionnaire-based interview (including VAS and SF-36) and 20 participants were then selected for a qualitative in depth interview. The lighting conditions in the kitchen, living room, bathroom, bedroom and staircase were measured according to a simplified procedure.…The overall lighting conditions were evaluated to be rather low, with means between 35 and 121 Lux, but the quantitative interviews showed that on most questions the scores were rather low, indicating that the overall thriving is good regardless of rather low lighting values.
Show more
Keywords: Lighting, housing, ageing, thriving
DOI: 10.3233/WOR-2012-0612-3385
Citation: Work,
vol. 41, no. Supplement 1, pp. 3385-3387, 2012
Abstract: Frequent use of digital information technology has an impact on eye- and neck/shoulder-discomfort. Studies with cross sectional and intervention design indicate an association between the two symptom categories. Still, whether visually demanding near work, per se, contributes to increased neck/shoulder discomfort remains a question of debate. The aim of this laboratory study was to assess if visually demanding experimental near work affects eye- and neck/shoulder-discomfort when the posture was adjusted for comfort and no movements were allowed. Thirty-three healthy subjects performed a visually demanding computer screen task (viewing task) under four different optical lens conditions: binocular -3.5 D and monocular…-3.5 D, +3.5 D and ±0 D. During the experiment subjects were seated in an office chair (with neck support) that was individually adjusted for comfort. At baseline and after each viewing task, subjects reported their perceived eye- and neck/shoulderdiscomfort on Borg’s CR-10 scale. Results show a significant increase of eye discomfort between baseline and the first viewing task, and a significant increase in neck/shoulder discomfort from baseline throughout the first three viewing tasks. Further analysis is required to determent whether the neck/shoulder discomfort was induced by the demanding near work or the static posture, or a combination.
Show more
Keywords: Vision ergonomics, computer vision syndrome, eye strain, neck pain, Video Display Unit (VDU) users
DOI: 10.3233/WOR-2012-0613-3388
Citation: Work,
vol. 41, no. Supplement 1, pp. 3388-3392, 2012
Abstract: Visual strain and discomfort may contribute to the generation of work-related musculoskeletal disorders among e.g. computer workers. A positive correlation on a group level between eye-lens accommodation and trapezius muscle activity has been reported. In this study we investigated the possibility of a direct, fast, connection between lens accommodation and trapezius muscles activity. The subjects focused alternately on Near and Far targets, with a mean switch time of 5 s, through four different lenses. The cross-correlation, R(tau) was computed, between the time signals of accommodation and electromyography (EMG) from 23 subjects. In the overall mean R(tau) of 736 curves, a…small but significant correlation peak (0.019) with a delay (of the EMG signal) of about 0.3 s, revealed a small common component in the two signals. Among the lenses, the positive lens (3.5 D), showed the highest correlation peak (0.040). The correlation may be caused by a direct “hard-wired” connection between the ciliary and trapezius muscles. But it could also be caused indirectly by the subject’s need for a more stable head in a more demanding visual task. The latter is supported by the result that the correlation was the highest in the positive lens condition. The present correlation is however weak and it has probably a low practical importance.
Show more
Abstract: The use of pictograms is discussed considering their information content, graphic complexity and cultural dimension. The resemblance and the illusion theories are highlighted to define pictogram as a salience-based representation system, which communicational efficacy depends upon historical and cultural aspects in their interpretation. Thus, the competence in interpreting pictograms is considered relative to users’ acquaintance with the pictorial system and with the referents. Pictogram as a general/neutral visual statement is questioned, pointing out the cultural and gender attributes added to pictures to represent people, professions and social events. As a result of this discussion, some critical points of the standardization…of pictograms are presented.
Show more
Keywords: pictogram, graphic aspects, cultural aspects, information ergonomics
DOI: 10.3233/WOR-2012-0615-3398
Citation: Work,
vol. 41, no. Supplement 1, pp. 3398-3403, 2012
Abstract: Subjective Visual Disturbances are silent adversaries that appear over a period of continued exposure and arise when the visual demands of the tasks exceed the visual abilities of the user. Jewellery manufacturing activity involves precision designs, setting the metal and stones, polishing and filing which requires higher visual demand. Therefore, it is expected that the jewellery manufacturing workers may experience subjective visual disturbances. This study was taken up with the following objectives 1) To study the presence of subjective visual disturbances among jewellery manufacturing workers and compare the same with VDT operators 2) To study the effect of work exposures…on subjective visual disturbances and 3) to ascertain whether subjective visual disturbances have any permanent vision related problems. The study was carried out on jewellery manufacturing workers, VDT operators and on graduate students. The symptoms of subjective visual disturbances were identified using a questionnaire developed by Sheedy (2003). Viewing distances were measured and visual angles were calculated. The eye check - ups were also carried out. The subjective visual disturbances were higher in jewellery manufacturing workers. The findings suggest that work exposure has an impact on the causation of subjective visual disturbances. No pathological conditions of the eyes were observed.
Show more
Keywords: asthenopia, near point task, Ocular –ESF, Ocular –, ISF
DOI: 10.3233/WOR-2012-0616-3404
Citation: Work,
vol. 41, no. Supplement 1, pp. 3404-3411, 2012
Abstract: Ergonomic evaluation of visual demands becomes crucial for the operators/users when rapid decision making is needed under extreme time constraint like navigation task of jet aircraft. Research reported here comprises ergonomic evaluation of pilot’s vision in a jet aircraft in virtual environment to demonstrate how vision analysis tools of digital human modeling software can be used effectively for such study. Three (03) dynamic digital pilot models, representative of smallest, average and largest Indian pilot population were generated from anthropometric database and interfaced with digital prototype of the cockpit in Jack software for analysis of vision within and outside the cockpit.…Vision analysis tools like view cones, eye view windows, blind spot area, obscuration zone, reflection zone etc. were employed during evaluation of visual fields. Vision analysis tool was also used for studying kinematic changes of pilot’s body joints during simulated gazing activity. From present study, it can be concluded that vision analysis tool of digital human modeling software was found very effective in evaluation of position and alignment of different displays and controls in the workstation based upon their priorities within the visual fields and anthropometry of the targeted users, long before the development of its physical prototype.
Show more
Keywords: vision analysis, digital human modeling, workstation design, aircraft cockpit
DOI: 10.3233/WOR-2012-0617-3412
Citation: Work,
vol. 41, no. Supplement 1, pp. 3412-3418, 2012
Abstract: This research aimed to study the activity of the HLB’s scouts, workers whose function is to identify symptomatic plants, in order to understand the physical constraints, cognitive and organizational involved in accomplishing the task, characterizing the operative approach used to identify diseased plants, and to elucidate what aspects hinder the identification of symptoms. The method adopted for the research was the Ergonomic Analysis of Work – EAW [6]. The results, after validation with the operators and management, allowed understanding the complex relationships between the physical, cognitive and organizational aspects present on activity. Major difficulties were observed mainly…in relation to the disposal of the scouts on the platforms and in relation to working hours, at the beginning and end of the journey. Important findings have highlighted strategies, unknown by the organization, used by scouts to locate candidates’ trees to the fine analysis of investigation of symptoms. In conclusion, the analysis enable to understand the constraints and find technical and organizational solutions to the survey work on citrus groves as well as it showed signs and symptoms not investigated yet or rarely considered by researchers involved on searches aimed at increasing the ability to diagnose the disease in the field.
Show more
Abstract: This paper presents the results of a research carried out in the states of Pernambuco and Rio Grande do Sul, Brazil about differences and similarities in the graphic representation of safety signs at factories of food, steel, shoes and construction/ building industries, together with their workers´ opinions on the security signs. The overall results show differences in the sign structure across the states, confirming the influence of cultural differences on the design of safety signs, which must be taken into account during the design process.
Abstract: This study was performed between 2004 and 2011 at mail sorting facilities in Sweden. During this time, different interventions were performed. The first was a lighting intervention that had a positive impact on the postal workers, especially those with eyestrain. A new lighting system also improved the illuminance and gave better light distribution. The second intervention involved new personal spectacles for the postal workers who needed them and this had a positive effect on eyestrain. The third intervention involved a specific type of sorting spectacles for the postal workers who already used progressive lenses privately. The reading distances that the…postal workers had while sorting the mail was inverted to the distances in their regular progressive lenses. The new sorting spectacles had a positive effect on head postures and on muscular activity.
Show more
Abstract: Mobile phones obtained large popularization in Brazil thanks to pre-paid (pay as you go) contracts. This kind of contract represents 82% of mobile phone connections in Brazil, corresponding to 143 million in a total of 174 million mobile phone accesses in the country. In this scenario, a research about the usability of mobile phones with 17 to 24 year old youngsters, living in poor communities, enrolled in the NGO Spectaculu. Usability tests were carried through with 30 youngsters from a NGO in Rio de Janeiro. Was made a extraction of the navigation sequence with data information of input and output…from the system. Point Navigation Map was created to track low-income mobile user's interaction.
Show more
Abstract: At present, it is recognized that the Internet plays key role in universalization of opportunities in society in which we live. For people with disabilities, the content must be accessible in all websites, but the assistive technologies used must be adequate to the specific needs of people with disabilities. Dosvox is a free system developed in the Universidade Federal do Rio de Janeiro (UFRJ) specially designed for blind people and used by them in the performance of their tasks with the use of computers. Previously, through exploratory research based on the observation of the interaction of blind students with the…Web, usability problems were identified in the Dosvox interface and in the Webvox, the Web browser included in the system, and these problems were related to the fact that the interface is designed in accordance with the mental model of these Information Technology professionals. This study consolidate the problems in earlier phases of the research, link the results with usability heuristics of Nielsen and propose several improvements to Dosvox and its development process.
Show more
Abstract: The numerical control of an experimental assembly cell with two robots – termed a cognitive control unit (CCU) – is able to simulate human information processing at a rule-based level of cognitive control. To enable the CCU to work on a large range of assembly tasks expected of a human operator, the cognitive architecture SOAR is used. The CCU can plan assembly processes autonomously and react to ad-hoc changes in assembly sequences effectively. Extensive simulation studies have shown that cognitive automation based on SOAR is especially suitable for random parts supply, which reduces planning effort in logistics. Conversely, a disproportional…increase in processing time was observed for deterministic parts supply, especially for assemblies containing large numbers of identical parts. In this contribution, the effect of phase-shifts in deterministic part supply is investigated for assemblies containing maximal different parts. It can be shown that the concept of cognitive automation is as well suitable for these planning problems.
Show more
Keywords: Cognitive automation, SOAR, Assembly, Joint cognitive systems
DOI: 10.3233/WOR-2012-0623-3449
Citation: Work,
vol. 41, no. Supplement 1, pp. 3449-3454, 2012
Abstract: The actors in charge of an emergency response are confronted with severe difficulties in coordination and decision making, especially in major accidents. To facilitate coordination, various decision support systems (DSS) integrated in communication systems have been developed. However, many DSS in the rescue service organizations are afflicted with under-use and other usability problems. Drawing on both a literature review and an analysis of recently obtained survey data from rescue personnel concerning usability of common communication system in Swedish emergency organizations, this paper addresses the issue of usability of DSS. It is concluded that the impetus for developing DSS in many…cases has been the technological possibilities per se, not taking the decision makers task structure and contextual factors into account. It is argued that priority should be given to functions that provide a visual overview of the event and facilitate storing of the series of decisions made during the response
Show more
