Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2024: 1.7
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Zeng, Shaohua | Wang, Qi | Wang, Shuai | Liu, Ping
Article Type: Research Article
Abstract: Shadow detection is a significant preprocessing work that soil type is classified with machine vision. Thus, Density peak clustering based on histogram fitting(DPCHF) is proposed to segment soil image shadows. First, its clustering centers are adaptively obtained by constructing a new parameterless density formula and decision value measure. Then the Fourier series are drawn into it to approximate the gray histogram and a part of gray-levels are allocated by valley points of the histogram fitting curve. Finally, an optimization model is established to optimize the threshold of detecting the shadow in the soil image, and the remaining gray-levels are clustered …by the threshold. The simulation results show that DPCHF is better than the contrast algorithm. The average brightness standard deviations of the shadow and non-shadow are respectively 20.9348 and 20.3081 with DPCHF. It can realize the adaptive shadow detection of soil images and there is not the “domino” error propagation in it. Show more
Keywords: Shadow detection, density peak clustering, soil image, machine vision
DOI: 10.3233/JIFS-211633
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 2963-2971, 2022
Authors: Chen, Dengfeng | Wang, Shuaiju | Zhang, Wen | Yang, Yalong | Chen, Pengwen
Article Type: Research Article
Abstract: With the development of infrastructure construction in China, the number of bridges is increasing rapidly, putting a strain on operation management and structural maintenance. Bridge Information Management System (BIMS) uses information and digital technology to ensure the maintenance of the bridge in long-term operation. However, large-scale bridge models are large in size, complex in structure, rich in information and occupy more computer resources, which harms performance of the BIMS. This paper aims to design and develop a bridge information visualization management system based on Building Information Model (BIM). The geometry and material information for the model is extracted from the …IFC by the secondary development of Revit. The lightweight method of the bridge model is studied and implemented, and the model volume is reduced to less than 20% by using the lightweight algorithm. Also, a Web-BIM-oriented model visualization scheme is proposed to render the lightweight model into the browser. This system integrates BIM with the Internet of Things (IoT) and contains information visualization, human-computer interaction and user collaboration. Such a BIMS can effectively relieve the pressure of bridge operation and maintenance, while also providing managers with a safe and reliable platform. Show more
Keywords: Bridge information management system, BIM, lightweight, Draco, WebGL
DOI: 10.3233/JIFS-211988
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 2973-2984, 2022
Authors: Li, Congdong | Wang, Dan | Yang, Weiming
Article Type: Research Article
Abstract: Reusing design knowledge of products is a useful way to solve the efficiency issue of complex product design. The design knowledge is tacit, empirical, and unstructured and there exists insufficient case matching and inefficient design reuse in complex products design process. Aiming at these problems, this paper presents an improved case-based reasoning methodology combining ontology with two-stage retrieval. Firstly, a knowledge domain ontology model of complex product design is constructed, and the technology of ontology-based data access is introduced to automatically generate a case knowledge base with semantic information. Then, a new two-stage case retrieval method integrated semantic query with …similarity calculation is proposed. The case subset is selected by query statements. It has the characteristic of isomorphism with design problem. The retrieval mechanism is applied to compress the traversal space, reduce the redundancy of semantic similarity calculation, improve the retrieval efficiency, and fulfill the target of case reuse. Finally, a variant design of the chiller unit as an example is executed to illustrate the use of the proposed method, and experiments are organized to evaluate its performance. The result shows that the proposed approach has an average precision of 92% and high stability, outperforming existing methods. Show more
Keywords: Knowledge representation, domain ontology, case retrieval, product design, case-based reasoning
DOI: 10.3233/JIFS-212927
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 2985-3002, 2022
Authors: Nimmala, Satyanarayana | Vikranth, B. | Muqthadar Ali, Syed | Usha Rani, Rella | Rambabu, Bandi
Article Type: Research Article
Abstract: High Blood Pressure (HBP) is one of the major significant medical concerns of many people around the globe today. HBP is so common symptom many people across the globe are experiencing, irrespective of age, gender, region, and religion. HBP prediction ahead of time can help the person to avoid the consequences such as heart stroke, kidney failure, eye damage, sexual dysfunction, and even death. HBP prediction in advance is a challenging issue as it is associated with many biopsychosocial factors. Heuristic and meta-heuristic-based Machine Learning Models (MLM) exclusively supervised machine learning techniques are becoming part and parcel of medical data …diagnosis. However, the reliability of outcome, usability, and understandability of such stand-alone models in processing medical data in real-time are not up to the mark. To overcome such limitations, in this paper we proposed an intelligent majority voting and heuristic-based user-friendly hybrid classifier to predict HBP (An Intelli MOC). The model considers AA-AOC (Anger level, Anxiety level-Age, Obesity level, and Cholesterol level) of a person to predict the HBP of a person. The proposed model is said to be majority vote-based and hybrid as it considers the output of three classifiers and assigns the count for each decision class. The model is said to be heuristic-based as it uses a mathematical and Fuzzy approach in obtaining the fuzzified values of each attribute in AA-AOC. The experiments are conducted on real-time data set collected from a medical diagnostic center Doctor C, Hyderabad, India. The model is executed on 1200 data records, 65% of data is used to train the model and 35% of data is used to test the model. The output of the model proved that the proposed model outperformed in terms of accuracy, precision, recall, and F-measure compared with all available state-of-the-art, existing MLM. Show more
Keywords: Hypertension, age, obesity, anger, anxiety, classification, obesity, machine learning models, and cholesterol
DOI: 10.3233/JIFS-212649
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3003-3020, 2022
Authors: Sreeja, S | Muhammad Noorul Mubarak, D.
Article Type: Research Article
Abstract: MRI-Only Radiation (RT) now avoids some of the issues associated with employing Computed Tomography(CT) in RT chains, such as MRI registration to a separate CT, excess dosage administration, and the cost of recurrent imaging. The fact that MRI signal intensities are unrelated to the biological tissue’s attenuation coefficient poses a problem. This raises workloads, creates uncertainty as a result of the required inter-modality image registrations, and exposes patients to needless radiation. While using only MRI would be preferable, a method for estimating a pseudo-CT (pCT)or synthetic-CT(sCT) for producing electron density maps and patient positioning reference images is required. As Deep …Learning(DL) is revolutionized in so many fields these days, an effective and accurate model is required for generating pCT from MRI. So, this paper depicts an efficient DL model in which the following are the stages: a) Data Acquisition where CT and MRI images are collected b) preprocessing these to avoid the anomalies and noises using techniques like outlier elimination, data smoothening and data normalizing c) feature extraction and selection using Principal Component Analysis (PCA) & regression method d) generating pCT from MRI using Deep Convolutional Neural Network and UNET (DCNN-UNET). We here compare both feature extraction (PCA) and classification model (DCNN-UNET) with other methods such as Discrete Wavelet Tranform(DWT), Independent Component Analysis(ICA), Fourier Transform and VGG16, ResNet, AlexNet, DenseNet, CNN (Convolutional Neural Network)respectively. The performance measures used to evaluate these models are Dice Coefficient(DC), Structured Similarity Index Measure(SSIM), Mean Absolute Error(MAE), Mean Squared Error(MSE), Accuracy, Computation Time in which our proposed system outperforms better with 0.94±0.02 over other state-of-art models. Show more
Keywords: Computed tomography, deep convolutional neural network, magnetic resonance imaging, principal component analysis, pseudocomputed tomography
DOI: 10.3233/JIFS-213367
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3021-3037, 2022
Authors: Chen, Xi | Jin, Wenquan | Wu, Qirui | Zhang, Wenbo | Liang, Haiming
Article Type: Research Article
Abstract: Automatic risk classification of diseases is one of the most significant health problems in medical and healthcare domain. However, the related studies are relative scarce. In this paper, we design an intelligent diagnosis model based on optimal machine learning algorithms with rich clinical data. First, the disease risk classification problem based on machine learning is defined. Then, the K-means clustering algorithm is used to validate the class label of given data, thereby removing misclassified instances from the original dataset. Furthermore, naive Bayesian algorithm is applied to build the final classifier by using 10-fold cross-validation method. In addition, a novel class-specific …attribute weighted approach is adopted to alleviate the conditional independence assumption of naive Bayes, which means we assign each disease attribute a specific weight for each class. Last but not least, a hybrid cost-sensitive disease risk classification model is formulated, and a practical example from the University of California Irvine (UCI) machine learning database is used to illustrate the potential of the proposed method. Experimental results demonstrate that the approach is competitive with the state-of-the-art classifiers. Show more
Keywords: Disease diagnosis, hybrid cost-sensitive machine learning (HCML), K-means clustering, naive Bayes (NB), conditional independence assumption
DOI: 10.3233/JIFS-213486
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3039-3050, 2022
Authors: Abughazalah, Nabilah | Khan, Majid | Batool, Syeda Iram
Article Type: Research Article
Abstract: Designing of nonlinear confusion component of block cipher is one of the most important and inevitable research problem. Nowadays mostly heuristic search schemes were utilized for the construction of these confusion component. To construct, a cryptographically secure confusion component several algebraic structures were utilized. The thirst for new algebraic structure for the construction of these nonlinear confusion component has always been a point of interest. In this communication, we have utilized a maximal cyclic subgroup of unit of Galois ring. The offered algorithm is more general as compared to Galois field. The class of Boolean functions over Galois ring fall …in mixed category which are not completely balanced. Boolean functions having higher nonlinearity and others cryptographic aspects added an inevitable significance in the construction of modern block ciphers. The primary idea of this article is to structure non-balanced Boolean functions on n variables, where n is an even integer, sustaining strict avalanche criterion (SAC) and bit independent criterion (BIC). By comparing SAC with available cryptographic Boolean functions, the constructed multivalued Boolean function acquire highest nonlinearity which does not follow the existing nonlinearity bound of Boolean functions. These newly proposed S-boxes consists of n basic Boolean functions which satisfy the balancedness and non-balancedness criterion. Therefore, these S-box structure lies within a less balanced and more bent Boolean function categories. Show more
Keywords: S-box, Galois Ring, maximal cyclic subgroup
DOI: 10.3233/JIFS-213591
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3051-3065, 2022
Authors: Sonia, | Tiwari, Pratiksha | Gupta, Priti
Article Type: Research Article
Abstract: Soft and fuzzy sets are generic tools to deal with uncertainty. Both contemporary sets are not suitable to deal with all type of uncertain parameters. In this paper the hybridization of soft with extended fuzzy set information measures are derived. Interval-valued intuitionistic fuzzy soft set theory is a powerful tool for dealing with uncertainty of knowledge in information systems. In this paper, firstly some distance and similarity measures for interval-valued intuitionistic fuzzy soft sets were proposed. Further, some new entropy measures are also introduced by using the similarity measures. The validity of these measures is also proved. Applications of the …distance measures is also used in the field of multi attribute decision making and medical diagnosis. The proposed measures are also compared with an existing measure to prove its significance. Show more
Keywords: Interval valued intuitionistic fuzzy soft set (IVIFSS), interval number, hesitant factor, Fuzzy soft set (FSS)
DOI: 10.3233/JIFS-212647
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3067-3086, 2022
Authors: Mohan, V. | Senthilkumar, S.
Article Type: Research Article
Abstract: Due to the shortage of fossil fuel usage, the solar Photovoltaic (PV) energy has increased grownup over the last decade. Most conventional applications of renewable energy are being phased out in order to reduce costs and save the environment. PV plants undergo numerous failures in faults detection and ultimate power developments. These consequences demonstrate in the environmental field and internal components. Even when internal standards are followed, the faults are unavoidable and undetectable. Due to this, the performance of manufacturing plants are not predictable. As a result, a proper fault detection mechanism is required for a PV system to detect …faults and avoid energy losses. To address these issues, this research work proposed Internet of Things (IoT) sensor-based fault identification in a solar PV system. The PV panel status is monitored using pressure, light intensity, voltage, and current sensors. These sensor data’s are stored in the cloud for further analysis using a web-based control server. To classify the sensor data, models of Support Vector Machine (SVM), and Extreme Learning Machine (ELM) are utilized. The experimental results indicate that ELM achieves a classification accuracy of 96.32%. Which is higher than SVM and other optimization control techniques. The proposed model uses the IoT cloud to provide real-time monitoring and fault detection in plant environmental and electrical parameters. Show more
Keywords: Internet of things, solar energy, fault detection, extreme machine learning, support vector machine
DOI: 10.3233/JIFS-220012
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3087-3100, 2022
Authors: Pandiyan, S. | Krishnamoorthy, D.
Article Type: Research Article
Abstract: End-to-end authentication in 5G communication networks is a prominent requirement due to the growing application demands and autonomously shared user data. The lack of data-related attributes and the communicating platform serves as a challenging issue in securing the shared content. Besides, administering security for the generated data is less feasible due to un-traceability and handoff experienced in the network. A Non-Redundant Traffic Authentication Scheme (NRTAS) is presented and the main objective of this proposed work provide a reliable authentication based on classifying the traffic. A traffic classification model is developed to categorize the traffic generated by the user equipment. A …tree-based process is employed for linear and discrete authentication to enhance network performances. To succeed high connectivity secure 5G communication and information sharing in a heterogeneous platform is presented. The effectiveness of proposed NRTAS-5G communication network approach is executed in Opportunistic network environment (ONE) simulator version: 1.2. The NRTAS achieves 8.09% less access time, reduces the traffic load by 13.69%, and improves the success ratio by 5.36% for 150 UEs (User Equipment’s). Show more
Keywords: 5 G communication, data security, key generation, traffic classification, sequential authentication
DOI: 10.3233/JIFS-212750
Citation: Journal of Intelligent & Fuzzy Systems, vol. 43, no. 3, pp. 3101-3114, 2022
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl