Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2024: 1.7
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Cristea, Irina | Davvaz, Bijan | Hassani Sadrabadi, E.
Article Type: Research Article
Abstract: Any complete hypergroup H can be characterized by an ordered m-tuple of natural numbers, representing the cardinalities of the subsets of H that divide it in a specific partition. In this paper we determine necessary and sufficient conditions concerning the corresponding m-tuples such that a particular intuitionistic fuzzy set (that is the key element in determining the intuitionistic fuzzy grade of a hypergroup) is an intuitionistic fuzzy subhypergroup of special complete hypergroups, those obtained from a group isomorphic with the additive group of integers modulo a prime number, or modulo the double of a prime number.
Keywords: Complete hypergroup, intuitionistic fuzzy set, intuitionistic fuzzy subhypergroup
DOI: 10.3233/IFS-141294
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 237-245, 2015
Authors: Ye, Jun
Article Type: Research Article
Abstract: The paper proposes the concepts of a single valued neutrosophic linguistic set (SVNLS) and a single valued neutrosophic linguistic number (SVNLN) as a further generalization of the concepts of a linguistic variable, an intuitionistic linguistic set and an intuitionistic linguistic number (ILN). Then, we introduce the basic operational rules of SVNLNs and define a generalized distance measure between SVNLNs. Furthermore, we develop an extended TOPSIS method for a multiple attribute group decision making problem based on the SVNLNs under single valued neutrosophic linguistic environment. Finally, an illustrative example of investment alternatives and the comparative analysis are given to demonstrate the …application and effectiveness of the developed approach. Show more
Keywords: Single valued neutrosophic linguistic set, single valued neutrosophic linguistic number, distance measure, TOPSIS method, group decision making
DOI: 10.3233/IFS-141295
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 247-255, 2015
Authors: Liu, Xiaodi | Zhu, Jianjun | Zhang, Shitao | Hao, Jingjing | Liu, Guodong
Article Type: Research Article
Abstract: The linear programming technique for multidimensional analysis of preference (LINMAP) and the technique for order preference by similarity to ideal solution (TOPSIS) are two well-known methods for dealing with the multiple attribute decision making (MADM) problems. In this paper, we further extend the LINMAP to accommodate hesitant fuzzy environment and propose a new approach to solve the MADM problems with hesitant fuzzy information. Then, an integrated method that combines the LINMAP and TOPSIS is developed. In this methodology, we take advantage of the LINMAP to determine the attribute weights objectively and thus overcome the drawbacks of the TOPSIS. Meanwhile the …TOPSIS that considers both the positive ideal solution (PIS) and the negative ideal solution (NIS) can make up the disadvantages of the LINMAP. In order to measure consistency and inconsistency between the ranking order of alternatives and the decision maker's preference, two indices based on PIS and NIS are defined. Moreover, a linear programming model that can be used for minimizing the total inconsistency is constructed to determine the attribute weights. By using the TOPSIS, we obtain the most appropriate alternative. Finally, two numerical examples are given to demonstrate the implementation process of the developed approach. Show more
Keywords: Hesitant fuzzy set, multiple attribute decision making, linear programming technique for multidimensional analysis of preference (LINMAP), technique for order preference by similarity to ideal solution (TOPSIS)
DOI: 10.3233/IFS-141296
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 257-269, 2015
Authors: Fard, Mehdi Tadayon | Esapour, Khodakhast | Dehghan, Bahram | Zare, Alireza
Article Type: Research Article
Abstract: Economic dispatch (ED) problem is a significant and precious strategy in the power engineering to preserve the balance between the load and generation in an economic way. The practical ED incorporates a non-convex objective function with several equality and inequality nonlinear constraints. As a result, solving the practical ED requires a powerful optimizer to reach the most economic dispatch solution. This paper suggests a newly introduced algorithm called Krill Herd (KH) to solve the practical ED problem considering the valve-loading effects, prohibited operating zone, spinning reserve and multi-fuel option, optimally. Also, a new modification method based on the Levy Flight …movement is suggested to increase the convergence of the KH algorithm. The suggested algorithm is applied to two small size and one large size test system to demonstrate its high search ability. Show more
Keywords: Practical Economic Dispatch (EED), Modified Krill Herd (MKH) Algorithm, non-convex objective, valve-loading effect
DOI: 10.3233/IFS-141297
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 271-277, 2015
Authors: Shahraki, Alireza | Ebrahimi, Seyed Babak
Article Type: Research Article
Abstract: In this paper, we report the development of a method for forecasting enrollments at the University of Alabama using the harmony search algorithm and fuzzy time series. In recent years, researchers have proposed many methods of forecasting, including forecasting enrollments at the University of Alabama or financial markets such as FOREX. In recent research efforts, it was determined that the lengths of the intervals in the universe of discourse and forecasting rules influence the accuracy of forecasting. Some forecasting methods use meta-heuristic algorithms (such as the genetic algorithm) to determine the optimum length of the intervals in the universe of …discourse. In this paper, we propose a new, meta-heuristic algorithm (i.e., the harmony search algorithm) that is based on a high-order, fuzzy time series and overlapping intervals. In previous methods, it was assumed that the universe of discourse is partitioned into separate intervals that do not overlap. Here, it is shown that overlapping intervals in the universe of discourse can influence the accuracy of forecasted values. Show more
Keywords: Time series, forecasting, fuzzy sets, harmony search algorithm, overlapping intervals
DOI: 10.3233/IFS-141298
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 279-290, 2015
Authors: Abbasi, Alireza | Solookinejad, Ghahraman | Fard, Mehdi Tadayon | Zare, Ali-Reza
Article Type: Research Article
Abstract: In power systems, reliability evaluations mainly depend on the precise forecasting of the reliability parameters of the internal components. Nonetheless, the procedure of calculating the reliability parameters such as failure rate and repair rate parameters is based on the failure statistics and measurements which can cause much inherent uncertainty and thus affecting the reliability indices of the system. Therefore, the main purpose of this work is to suggest a sufficient and easy-implemented approach based on scenario production to capture the uncertainty of the reliability parameters including the failure rate and repair rate variables. Here, the scenario generation process is constructed …using the roulette wheel mechanism along with the probability density function of the random variables. Then, the proposed scenario based approach makes use of a scenario reduction mechanism to avoid high computational burden. This aspect of the proposed stochastic framework makes it useful for the optimization applications which require iterative analysis. In order to see the feasibility and satisfying performance of the proposed framework, an IEEE standard test system is used as the case study. Show more
Keywords: Scenario-based approach, uncertainty, reliability, measurements and statistics
DOI: 10.3233/IFS-141299
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 291-299, 2015
Authors: Bai, Shi-Zhong
Article Type: Research Article
Abstract: The purpose of this paper is to introduce the concept of generalized L-topological spaces, including to study the basic concepts of open sets, closed sets, interior and closure operators, continuous mappings, sub-spaces, quotient spaces and connectedness in generalized L-topological spaces.
Keywords: Generalized L-topology, generalized L-open set, generalized L-continuity, generalized L-connectedness
DOI: 10.3233/IFS-141300
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 301-309, 2015
Authors: Poornima, J. | Sivaraja, M.
Article Type: Research Article
Abstract: The key objective of this paper is to give a detailed account on rehabilitation of RC beams by means of a composite created with natural fibre called jute. For the sake of experimentation, seven under-reinforced beam specimens are cast with size of 2000 mm × 100 mm × 150 mm. One beam is permitted to perform as control specimen without any external wrapping and it is tested for its final load. The other six beams are loaded up to a pre-fixed level up to first crack. Then rehabilitation is performed by outwardly wrapping natural fibre (jute) reinforced polymer composites to …the beam under various schemes. Their feat is contrasted with beams outwardly wrapped with Glass fibre reinforced polymer composites. Beams are tested under static load condition up to failure. The load, mid-span deflection and cracking pattern are vigilantly observed and estimated for the control beam and rehabilitated beams. Show more
Keywords: Reinforced concrete, rehabilitation, natural fibre, glass fibre
DOI: 10.3233/IFS-141302
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 311-316, 2015
Authors: Chen, Su | Mu, Zhiming | Zeng, Shouzhen
Article Type: Research Article
Abstract: In this paper, we develop a new method for Atanassov's intuitionistic fuzzy decision making problems. We present the Atanassov's intuitionistic fuzzy probabilistic ordered weighted distance (IFPOWD) operator. Its main advantage is that it uses distance measures in a unified framework between the probability and the OWA operator that considers the degree of importance of each concept in the aggregation. Moreover, it is able to deal with uncertain environments represented in the form of Atanassov's intuitionistic fuzzy information. We analyze the applicability of this new approach in a group decision making problem concerning selection of investments.
Keywords: Probability, OWA operator, distance measures, atanassov's intuitionistic fuzzy, decision making
DOI: 10.3233/IFS-141305
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 317-325, 2015
Authors: Verma, Rajkumar | Sharma, BhuDev
Article Type: Research Article
Abstract: Fuzzy sets have led to study of vague phenomena. Generalizations of fuzzy sets have led to deeper analysis of these types of studies. The problem that then arises is to finding quantitative measures for vagueness and other features of these phenomena. In the present paper, based on the concept of R-norm fuzzy entropy, an R-norm intuitionistic fuzzy entropy measure is proposed in the setting of intuitionistic fuzzy set theory. This measure is a generalized version of R-norm fuzzy entropy proposed by Hooda in 2004. Some properties of this measure are proved. Finally, a numerical example is given to show that …the proposed entropy measure for intuitionistic fuzzy set is reasonable by comparing it with other existing intuitionistic fuzzy entropy measures. Show more
Keywords: R-norm entropy, R-norm fuzzy entropy, intuitionistic fuzzy sets, intuitionistic fuzzy entropy
DOI: 10.3233/IFS-141306
Citation: Journal of Intelligent & Fuzzy Systems, vol. 28, no. 1, pp. 327-335, 2015
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl