Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 250.00Authors: Costa, Ana Filipa | Puga-Leal, Rogério | Nunes, Isabel L.
Article Type: Research Article
Abstract: Objective: The objective of this paper is to present a study on the assessment of the work ability of a group of aged computers workers. The study was developed with the goal of creating a decision making framework oriented towards the maintenance of the health and working ability of aged workers. Participants: Fifty computer workers participated in this study. They were administrative secretaries and computer technicians working mainly with office computers. Methods: The method used to …assess the work ability was the Work Ability Index (WAI). Results: 78% of the participants had good or excellent work ability and only 2% a poor one. The average WAI score was 40.5 (SD=5.761; min=27; max=49). This study confirms the decrease in work ability of workers while aging. The group overall work ability was slightly higher than the reference values develop by the Finnish Institute of Occupational Health. Conclusions: The assessment of work ability is fundamental to make age-friendly workplaces. WAI is one tool designed to perform such assessment. The results obtained could assist the early identification of situations where employees are struggling with their work ability, thus helping to prioritize ergonomic interventions devoted to improve the working conditions, and allowing the continued employment of aging workers on their current job. Show more
Keywords: Aging worker, aging workforce, rising of life expectancy, work ability
DOI: 10.3233/WOR-2011-1186
Citation: Work, vol. 39, no. 4, pp. 357-367, 2011
Authors: Jacinto, Celeste | Soares, C. Guedes | Fialho, Tiago | Ant\~{a}o, Pedro | Silva, Sílvia A.
Article Type: Research Article
Abstract: This paper describes a comparative analysis of the official forms used for reporting occupational accidents within the EU-27 member states. The comparison is based on two analysis grids (coding schedule) created to that effect, which incorporate a set of evaluation criteria and an interpretation key. The results obtained in the analysis allowed for attention to be drawn to the relevant attributes of such forms in terms of their content and format/structure. It also revealed the main …similarities and differences between each country, providing a complete assessment of the 27 member states. The discussion gives account of the level of implementation of the "new" Eurostat variables within the European Statistics of Accidents at Work (ESAW). Furthermore, the study shows that certain formats (structure of information fields) appear to facilitate completeness of the information collected. It has also demonstrated that the European harmonisation process is still far from completion, although the newcomer states seem to be adjusting quickly to the process. The findings of this study may bring useful insights to national authorities and European policy-makers, or to employers/enterprises wishing to implement their internal procedures aligned with the ESAW methodology. The scientific community is another interest group, whose research relies on official statistics, preferably comparable across all countries. Show more
Keywords: European harmonisation, accident reporting systems, Eurostat variables, occupational accidents
DOI: 10.3233/WOR-2011-1187
Citation: Work, vol. 39, no. 4, pp. 369-378, 2011
Authors: Kuhl, Klaus | Dobernowsky, Mario
Article Type: Research Article
Abstract: Objective: PIMEX was used to motivate workers to actively improve their working conditions. Participants: The Kooperationsstelle has applied the method in several companies across different sectors. In this article, exemplary case studies are presented. Methods: PIMEX uses video recording and monitoring of indicators by sensors and transducers attached to the workers. These register and record the part of the work process where they were exposed to risk factors and to what extent. …The observations are stored on a notebook computer and can be repeated and replayed instantly. Results: In all cases, workers started experimenting with modifying the workflow, the extraction system and its positioning, their working posture and the PPE. Modifications were tested several times and the resulting exposure differences were analysed until a satisfactory reduction was achieved. Selected records were then used for regular training sessions, which contribute to the long-term effect. Specialists within the companies were contacted at a later date and they have confirmed the long lasting effect. Conclusions: PIMEX has proved in these cases to be an excellent method for convincing employees to change their behaviour and to adhere in the long-term to the newly-evolved work processes and preventive measures. Show more
Keywords: Picture mixed exposure, employee behaviour, sustainable changes in behaviour
DOI: 10.3233/WOR-2011-1188
Citation: Work, vol. 39, no. 4, pp. 379-384, 2011
Authors: Arezes, Pedro M. | Miguel, A. Sérgio | Colim, Ana S.
Article Type: Research Article
Abstract: Objective: There are several methodologies to assess the risk involved in Manual Materials Handling (MMH). The aim of this study was to identify the knowledge and use of risk assessment methods among Portuguese Health and Safety (H&S) practitioners. Participants: The study involved the participation of 331 H&S practitioners and other related prevention professionals. Method: An e-mail invitation to complete an online survey was sent to all Portuguese registered H&S practitioners. The previously …developed and validated questionnaire included three different sections: (1) company characteristics; (2) description of types of MMH tasks performed; and (3) the respondents' use of and knowledge about risk assessment methods for MMH tasks. Results: The answers obtained were collected from almost 350 companies. The characteristics of the companies showed that there is a predominance of external and internal H&S services for Small and Medium sized Enterprises (SMEs) and large companies, respectively. The NIOSH equation, Key Indicator Method (KIM) and Manual Assessment Chart (MAC) were identified as the most used and recognised risk assessment methods. Conclusion: Questionnaire results show that an important number of Portuguese H&S practitioners recognise some methods but have difficulty applying them correctly. Some practitioners reported that they had never used any type of risk assessment method. Show more
Keywords: Risk, assessment, methods, practices
DOI: 10.3233/WOR-2011-1189
Citation: Work, vol. 39, no. 4, pp. 385-395, 2011
Authors: Lima, Tânia M. | Coelho, Denis A.
Article Type: Research Article
Abstract: Twelve recently built office work stations, where jobs imply continued use of information and communication technologies, were analyzed for ergonomic risk factors. Based on a literature review of ergonomic recommendations for computer and general office work, a checklist was devised for assistance in identifying inadequate ergonomic situations, a process that was informed by pain complaints information. RULA (Rapid Upper Limb Assessment) was selected to estimate the risk of MSDs, considering the criteria of …applicability and appropriateness to the case studied. This method was applied by an occupational health and safety technician to the most critical job observed in the workplace. Criticality was estimated through observations aided by the systematic use of a checklist tailored to the specific office scenario. Recommendations for change were provided for implementation in all workplaces in the office, in order to improve work conditions, and guide the setup of a MSD prevention training program. Show more
Keywords: Physical ergonomics, musculoskeletal disorders, assessment of ergonomic hazards, office work
DOI: 10.3233/WOR-2011-1190
Citation: Work, vol. 39, no. 4, pp. 397-408, 2011
Authors: Larsson, J. | Landstad, B.J. | Wiklund, H. | Vinberg, S.
Article Type: Research Article
Abstract: Introduction: Statistical Process Control (SPC) charts have not been widely used to monitor workplace health and work environments. This research and effort to develop a more accurate and easy to use management control system for employee health is important from a humanistic, societal and economic standpoint, as well as complying with laws that regulate work environments. Objective: The purpose of the study is to design and discuss control charts as an early warning system for workplace health outcomes to …promote workplace health management. Another purpose is to discuss relevant factors in the concept of the Out-of-Control Action Plan (OCAP) as a response when a chart warns that the workplace process may be malfunctioning. Participants: Two Swedish organizations were selected as case study organizations: a department at a university and an elderly care operation in a municipality. Methods: This study was explorative and should be seen as a starting point in learning how to use control charts for workplace health management. Self-assessed general health and new sick-cases per employee were selected as indicators for the control charts. Results: An integrated early warning system with Cumulative Sums- and Shewhart-charts are presented to show a possible method as to how an early warning system can be structured through the use of statistical control charts. Conclusions: The conclusion of this study is that control charts, along with well-designed implementation, make up a powerful and useable managerial early-warning system which promotes workplace health and helps to prevent sickness absence. Show more
Keywords: Statistical Process Control, Shewhart chart, workplace health management, sickness absence, general health
DOI: 10.3233/WOR-2011-1191
Citation: Work, vol. 39, no. 4, pp. 409-425, 2011
Authors: Corbière, Marc | Lanctôt, Nathalie
Article Type: Research Article
Abstract: Objective: This study aimed to identify the key components of supported employment (SE) programs needed to help people with serious mental illness obtain and maintain competitive employment. Participants and methods: Via convenience sampling, semi-structured interviews were conducted with 69 employment specialists and ninety-nine (99) clients who successfully obtained employment through SE programs in three Canadian provinces. Results: The findings describe five themes important to getting a job and to keeping a job: 1) philosophy of the program, …2) programmatic SE components, 3) employment specialists' competencies (skills, attitudes, and behaviours), 4) clients' skills and characteristics, and 5) elements related to employers. Employment specialists perceived a positive attitude and a client-centered program philosophy to be important for obtaining employment, while they perceived the support offered, the frequency and length of the follow-up as essential elements for maintaining a job. Clients perceived the employment specialists' competencies (e.g., positive attitude, marketing skills) to be important components. Conclusion: These results suggest a need to update the essential components in SE programs, or to include additional SE components. Show more
Keywords: Critical components, serious mental illness, qualitative study
DOI: 10.3233/WOR-2011-1192
Citation: Work, vol. 39, no. 4, pp. 427-439, 2011
Authors: Willey, Marc S.
Article Type: Research Article
Abstract: Background: Extensive keyboarding has been associated as a risk factor for repetitive strain injuries. Modifying the slope angle may decrease the negative cumulative effects of this activity. Objective: This study investigated the kinematic effect of four keyboard modifications on wrist extension during keyboarding. Participants: 32 female college students between the age of 21 and 25, mean age of 22.4 years. Method: A Greenleaf Biomechanical Analyzer was utilized to determine the …wrist extension angles across four keyboard modifications. Results: A one way ANOVA with repeated measures revealed significant differences between all 4 test conditions for both right and left wrist extension, Wilks Lambda 0.249 F (3,29) 29.1, p=0.000 n^{2} = 0.75 for left wrist and Wilks Lambda 0.158 F (3,29) 51.6, p=0.000 n^{2} = 0.84 for the right wrist. Conclusion: The study suggests that simple modifications to a standard computer keyboard can significantly vary wrist angles during keyboarding. These findings could possibly improve worksite modification guidelines and prevent repetitive strain injuries among keyboarders. Show more
Keywords: Repetitive strain injuries, worksite modification, prevention
DOI: 10.3233/WOR-2011-1193
Citation: Work, vol. 39, no. 4, pp. 441-444, 2011
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl