Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2023: 2
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Reka, S | Karthik Sainadh Reddy, Dwarampudi | Dhiraj, Inti | Suriya Praba, T
Article Type: Research Article
Abstract: Polycystic Ovary Syndrome (PCOS) is a hormonal condition that typically affects female during the time of their reproduction. It is identified by the disruptions in hormonal balance, particularly an increase in levels of androgen (male hormone) in the female body. PCOS can lead to various symptoms and health complications including irregular menstrual cycles, ovarian cysts, fertility issues, insulin resistance, weight gain, acne, and excess hair growth. The real-world PCOS detection is a challenging task whilst PCOS specific cause is unknown and its symptoms are unclear. Thus, accurate and timely diagnosis of PCOS is crucial for effective management and prevention of …long-term complications. In such cases, Machine learning based PCOS prediction model support diagnostic process, address potential errors and time constraints. Machine learning algorithms can analyze large set of patient data, including medical history, hormonal profiles, and imaging results, to assist in the diagnosis of PCOS. In particular, the performance of data analysis chore and prediction model is improved by ensemble feature selection strategies. These methods concentrate on selecting a subset of pertinent features from a broader range of features. The unstable nature of the outcome of feature selection algorithm is a frequent issue in practical applications, when it is applied multiple times on similar dataset or with slight modifications in the data. Thus, evaluating the robustness of feature selection algorithm is most important. To address these issues and quantify the robustness, this study uses Jenson-Shannon divergence, an information theoretic approach with ensemble feature selection method to handle the various findings, such as complete ranking, half ranking and top-k lists (without ranking). Furthermore, this article proposes a hybrid machine learning classifier with SMOTE – SVM for the prompt detection of PCOS and the performance of the model is compared with a number of other individual classifiers including KNN (K-Nearest Neighbour), Support Vector Machine (SVM), AdaBoost, LR –Logistic Regression, NB –Nave Bayes, RF –Random Forest, Decision Tree. The proposed SWISS-AdaBoost classifier surpassed other models with 97.81% of accuracy and AUC of 99.08%. Show more
Keywords: Polycystic ovary syndrome (PCOS), Jenson-shannon divergence, SVM (Support Vector Machine), K-nearest neighbour, logistic regression, decision tree, naive bayes and AdaBoost
DOI: 10.3233/JIFS-219402
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Ezhilarasie, R. | MohanRaj, I. | Ramakrishnan, Thiruvikram Gopichettipalayam | Madhavan, Vyas | Narayan, Keshav | Umamakeswari, A.
Article Type: Research Article
Abstract: Internet of Things (IoT) devices are major stakeholders of contemporary network bandwidth. The proliferation of IoT devices and the demand for latency-free communication in time-critical applications has proven the drawback of cloud-based solutions. Edge computing is an paradigm that reduces the application’s response time by utilizing computation and storage proximate to each devices. Privacy in cloud computing is attained by system virtualization, containerization, among other evolved technologies. As privacy remains a primary concern, there is a need to test the feasibility of resource-constrained edge devices. Hence, this work aimed to examine the usability of such devices in edge computing by …benchmarking on different runtime environments. The results reveal that a standard mechanism was achieved for defining the criteria to identify the suitable edge devices for computation offloading, particularly for a set of smart traffic surveillance use cases. Further, an optimization algorithm was designed to generate an optimum schedule that decides the best device to execute a particular task from the set of suitable edge devices to enhance energy and execution time in a global view. Based on the feasibility study and optimal schedule, a makespan that is nearly 11 times better than local execution for the considered traffic surveillance workflow was achieved. Show more
Keywords: Container, docker, edge computing, IoT, LXC, offloading, single board computer
DOI: 10.3233/JIFS-219424
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-13, 2024
Authors: Bukya, Hanumanthu | Bhukya, Raghuram | Harshavardhan, A.
Article Type: Research Article
Abstract: Fog computing has several undeniable benefits, such as enhancing near-real-time response, reducing transmission costs, and facilitating IoT analysis. This technology is poised to have a significant impact on businesses, organizations, and our daily lives. However, mobile user equipment struggles to handle the complex computing tasks associated with modern applications due to its limited processing power and battery life. Edge computing has emerged as a solution to this problem by relocating processing to nodes at the network’s periphery, which have more computational capacity. With the rapid evolution of wireless technologies and infrastructure, edge computing has become increasingly popular. Nevertheless, managing fog …computing resources remains challenging due to resource constraints, heterogeneity, and distant nodes. For delay-sensitive intelligent IoT applications within the fog computing architecture, cooperation and communication processing resources in 6 G and future networks are essential. This study proposes a joint computational and optimized resource allocation (JCORA) technique to accelerate the processing of data from intelligent IoT sensors in a cell association environment. The proposed technique utilizes an uplink and downlink power allocation factor and the shortest job first (SJF) task scheduling system to optimize user fairness and decrease data processing time. This is a complex assignment due to several non-convex limitations. The suggested JCORA-SJF model simultaneously optimizes time partitioning, computing task processing mode selection, and target sensing location selection to maximize the weighted total of task processing and communication performance. The simulation results demonstrate the effectiveness of the proposed JCORA-SJF algorithms, and the system’s scalability is also examined. Show more
Keywords: Fog computing, Internet of Things (IoT), resource allocation, edge computing networks, optimized resource allocation (JCORA), shortest job first (SJF)
DOI: 10.3233/JIFS-219421
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Singh, Pardeep | Singh, Monika | Singh, Nitin Kumar | Das, Prativa | Chand, Satish
Article Type: Research Article
Abstract: Social media platforms play vital roles in disseminating information during crisis situations. Many rescue agencies, media outlets, and volunteers regularly monitor this data to identify and analyze disasters, ultimately mitigating life risks. However, effectively categorizing these messages based on information types is crucial for enhancing the situational awareness of emergency responders. This paper addresses the challenge of analyzing informal crisis-related social media texts by classifying disaster event tweets into 10 humanitarian categories associated with 19 major natural disaster events. We fine-tune seven state-of-the-art pre-trained transformer models and compare their performance with the recently introduced domain-specific models, i.e., CrisisTransformers. We empirically …found that CrisisTransformers outperform seven strong baseline transformer models in classifying disaster-specific tweets from the HumAID dataset, achieving a macro-averaged F1 score of 0.77. Our work contributes to the crisis computing field by improving the classification of disaster-related tweets and enhancing the capabilities of emergency responders and disaster management organizations. Show more
Keywords: Transformers, crisis computing, disaster classification, Twitter, disaster response
DOI: 10.3233/JIFS-219419
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-10, 2024
Authors: Muppavarapu, Vamsee | Ramesh, Gowtham
Article Type: Research Article
Abstract: The W3C linked building data group is working on modeling the information for integrating building information with building life cycle data using Semantic Web technologies. The community has proposed a set of semantic models such as ifcOWL and Building Topology Ontology (BOT), to model various applications across Architecture, Engineering, Construction, and Operation (AECO) domain. On the other hand, the Semantic Web of Things (SWoT) group proposed standard semantic models such as M3-lite and BOSH ontologies for describing the sensor networks, observations, and sensor measurements. Both the aforementioned domains have their own siloed applications and with the evolution of the smart …home domain, there is a need to combine the knowledge of building information with the sensor knowledge to develop cross-domain applications. However, in order to develop such downstream applications leveraging advantages from both domains requires interoperable knowledge. This paper proposes an interoperable ontology, Building Topology Ontology for Smart Homes (BOTSH), with the aim of aligning the building domain with sensors domain semantic models. The BOTSH ontology facilitates capturing knowledge from both domains and helps in developing cross-domain applications. The potential of the proposed model was demonstrated using a real-life building model based on the competency questions framed by the domain experts. Show more
Keywords: Semantic web of things, building information models, building topology, sensors and observations, smart homes, knowledge graphs, semantic applications
DOI: 10.3233/JIFS-219425
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Pillai, Leena G. | Muhammad Noorul Mubarak, D. | Sherly, Elizabeth
Article Type: Research Article
Abstract: Speech production is a complex sequential process which involve the coordination of various articulatory features. Among them tongue being a highly versatile active articulator responsible for shaping airflow to produce targeted speech sounds that are intellectual, clear, and distinct. This paper presents a novel approach for predicting tongue and lip articulatory features involved in a given speech acoustics using a stacked Bidirectional Long Short-Term Memory (BiLSTM) architecture, combined with a one-dimensional Convolutional Neural Network (CNN) for post-processing with fixed weights initialization. The proposed network is trained with two datasets consisting of simultaneously recorded speech and Electromagnetic Articulography (EMA) datasets, each …introducing variations in terms of geographical origin, linguistic characteristics, phonetic diversity, and recording equipment. The performance of the model is assessed in Speaker Dependent (SD), Speaker Independent (SI), corpus dependent (CD) and cross corpus (CC) modes. Experimental results indicate that the proposed model with fixed weights approach outperformed the adaptive weights initialization with in relatively minimal number of training epochs. These findings contribute to the development of robust and efficient models for articulatory feature prediction, paving the way for advancements in speech production research and applications. Show more
Keywords: Acoustic-to-articulatory inversion, smoothing techniques, articulatory features, weight initialization, bidirectional long short-term memory
DOI: 10.3233/JIFS-219386
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-14, 2024
Authors: Sheshadri, Shailashree K. | Gupta, Deepa
Article Type: Research Article
Abstract: Non-Autoregressive Machine Translation (NAT) represents a groundbreaking advancement in Machine Translation, enabling the simultaneous prediction of output tokens and significantly boosting translation speeds compared to traditional auto-regressive (AR) models. Recent NAT models have adeptly balanced translation quality and speed, surpassing their AR counterparts. The widely employed Knowledge Distillation (KD) technique in NAT involves generating training data from pre-trained AR models, enhancing NAT model performance. While KD has consistently proven its empirical effectiveness and substantial accuracy gains in NAT models, its potential within Indic languages has yet to be explored. This study pioneers the evaluation of NAT model performance for Indic …languages, focusing mainly on Kashmiri to English translation. Our exploration encompasses varying encoder and decoder layers and fine-tuning hyper-parameters, shedding light on the vital role KD plays in facilitating NAT models to capture variations in output data effectively. Our NAT models, enhanced with KD, exhibit sacreBLEU scores ranging from 16.20 to 22.20. The Insertion Transformer reaches a SacreBLEU of 22.93, approaching AR model performance. Show more
Keywords: Neural machine translation, auto-regressive translation, non-autoregressive translation, Levenshtein Transformer, insertion transformer, knowledge distillation
DOI: 10.3233/JIFS-219383
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-15, 2024
Authors: Bai, Xiaojun | Jia, Haiyang | Fu, Yanfang | Ji, Yu | Li, Suyang
Article Type: Research Article
Abstract: Predicting the remaining life of aircraft engines is paramount in aviation maintenance management. It helps formulate maintenance schedules, reduce maintenance expenses, and enhance flight safety. Traditional methods for predicting the remaining life of an engine suffer from significant errors and limited generalization capabilities. This paper introduces a predictive model based on Long Short-Term Memory (LSTM) networks and Feedforward Neural Networks (FNN) to improve prediction accuracy. Furthermore, the model’s hyperparameters undergo optimization using the Gannet Optimization Algorithm (GOA). Leveraging the N-CMAPSS dataset for prediction and transfer learning experiments, the results highlight the significant advantages of the proposed model in forecasting the …remaining life of aircraft engines. When subjected to training and testing on the DS02 equipment dataset, the root mean square error (RMSE) registers at 5.04. At that time, the score function reached a value of 1.39, surpassing the performance of current state-of-the-art prediction methods. Additionally, in terms of its transfer learning capabilities, the model demonstrates minimal fluctuations in RMSE when applied directly to datasets of various other engine models. It consistently maintains a high level of predictive accuracy. Show more
Keywords: Remaining life prediction, N-CMAPSS dataset, long short-term memory network, Gannet Optimization Algorithm (GOA)
DOI: 10.3233/JIFS-236225
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-16, 2024
Authors: Anbumani, A. | Jayanthi, P.
Article Type: Research Article
Abstract: GLOBOCAN 2020 states that, after lung cancer, breast cancer is the most common cancer worldwide, affecting many women [1 ]. AI-based computer-assisted detection/diagnosis techniques can assist radiologists in diagnosing breast cancer earlier. Mammography is one of the most widely used and effective methods for detecting and treating breast cancer. This research proposes a customised deep-learning model for breast cancer categorization. To effectively categorise the breast cancer mammography image, two customised CNN models are proposed. Three real-time datasets such as MIAS, CBIS-DDSM, and INbreast were used to evaluate the efficacy of the proposed categorization strategy. The results show that the proposed …method effectively classifies the image and obtains 98.78%, 97.84% and 96.92% accuracy for the datasets MIAS, INbreast and CBIS-DDSM. Show more
Keywords: Breast cancer, CNN, deep learning, mammography, classification
DOI: 10.3233/JIFS-232896
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-12, 2024
Authors: Cruz, Elsy | Santos, Lourdes | Calvo, Hiram | Anzueto-Rios, Álvaro | Villuendas-Rey, Yenny
Article Type: Research Article
Abstract: In recent years, multiple studies have highlighted the growing correlation between breast density and the risk of developing breast cancer. In this research, the performance of two convolutional neural network architectures, VGG16 and VGG19, was evaluated for breast density classification across three distinct scenarios aimed to compare the masking effect on the models performance. These scenarios encompass both binary classification (fatty and dense) and multi-class classification based on the BI-RADS categorization, utilizing a subset of the ABC-Digital Mammography Dataset. In the first experiment, focusing on cases with no masses, VGG16 achieved an accuracy of 93.33% and 90.00% for two and …four-class classification. The second experiment, which involved cases with benign masses, yielded a remarkable accuracy of 95.83% and 93.33% with VGG16, respectively. In the third and last experiment, an accuracy of 88.00% was obtained using VGG16 for the two-class classification, while VGG19 delivered an accuracy of 93.33% for the four-class classification. These findings underscore the potential of deep learning models in enhancing breast density classification, with implications for breast cancer risk assessment and early detection. Show more
Keywords: Mammography, breast tissue density, convolutional neural networks
DOI: 10.3233/JIFS-219378
Citation: Journal of Intelligent & Fuzzy Systems, vol. Pre-press, no. Pre-press, pp. 1-9, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl