Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 315.00Impact Factor 2024: 1.7
The purpose of the Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology is to foster advancements of knowledge and help disseminate results concerning recent applications and case studies in the areas of fuzzy logic, intelligent systems, and web-based applications among working professionals and professionals in education and research, covering a broad cross-section of technical disciplines.
The journal will publish original articles on current and potential applications, case studies, and education in intelligent systems, fuzzy systems, and web-based systems for engineering and other technical fields in science and technology. The journal focuses on the disciplines of computer science, electrical engineering, manufacturing engineering, industrial engineering, chemical engineering, mechanical engineering, civil engineering, engineering management, bioengineering, and biomedical engineering. The scope of the journal also includes developing technologies in mathematics, operations research, technology management, the hard and soft sciences, and technical, social and environmental issues.
Authors: Shekarian, Ehsan | Glock, Christoph H. | Amiri, Seyyed Mehrdad Pourmousavi | Schwindl, Kurt
Article Type: Research Article
Abstract: This paper develops a lot size model for a single-stage production system producing defective items that need to be reworked. Because the rate of defectives and the demand rate are usually not known precisely in practice, we fuzzify both rates with the help of triangular fuzzy numbers. The fuzzified total cost function, which considers setup, inventory carrying, and processing costs is defuzzified using two popular defuzzifying techniques, namely the signed distance and the graded mean integration representation (GMIR) methods. For the defuzzified total cost function, optimal lot sizes are calculated. A numerical example is then provided to illustrate the results …of the model, and the results that were obtained by the two defuzzification methods are compared. The results indicate that the optimal lot size obtained by the signed distance method is larger than the one obtained by the GMIR method. In addition, the results show that the total costs obtained using the GMIR method are higher than those obtained by the signed distance method. Show more
Keywords: Lot sizing, fuzzy set theory, graded mean integration representation method, signed distance method, rework process, single-stage production system
DOI: 10.3233/IFS-141264
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3067-3080, 2014
Authors: Suresh, M. | Vengataasalam, S. | Arun Prakash, K.
Article Type: Research Article
Abstract: Ranking fuzzy numbers plays a very important role in the decision process, data analysis and applications. The concept of an intuitionistic fuzzy number (IFN) is of importance for quantifying an ill-known quantity, and the ranking of IFNs is a very difficult problem. In this paper ranking of triangular intuitionistic fuzzy numbers (TIFNs) is made by means of magnitude and applied to solve intuitionistic fuzzy linear programming problem. Numerical examples are examined to demonstrate the implementation of ranking method.
Keywords: Intuitionistic fuzzy set, triangular intuitionistic fuzzy number, ranking of triangular intuitionistic fuzzy numbers, intuitionistic fuzzy linear programming problem
DOI: 10.3233/IFS-141265
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3081-3087, 2014
Authors: Kar, Sukhendu | Purkait, Sudipta
Article Type: Research Article
Abstract: The notion of k-regularity in a semiring generalizes the notion of a regular ring introduced by J. Von Neumaan [15]. In semiring theory, the notion of k-regularity was extensively studied by Sen and Bhuniya [17]. In this paper, we study the concept of k-regularities of a semiring in fuzzy setting and characterize some k-regularities of semirings by using different fuzzy ideals of semirings. We also introduce the concept of power fuzzy semirings and study the notion of k-regularities of power fuzzy semirings with the help of regularities of semigroups.
Keywords: Power fuzzy semiring, fuzzy generalized k-bi-ideal, fuzzy interior k-ideal, k-regular semiring, k-intra-regular semiring
DOI: 10.3233/IFS-141266
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3089-3101, 2014
Authors: Saleh, Sadreddin | Mohammadi, Sirus | Rostami, Mohammad-Amin | Askari, Mohammad-Reza
Article Type: Research Article
Abstract: This paper aims to propose a novel hybrid intelligent linear-nonlinear load forecasting model which takes into account both linearity and nonlinearity of load time series as a requirement of precise forecasting. The linear part of the time series is forecasted by the Auto Regressive Integrated Moving Average (ARIMA). The nonlinear ARIMA residuals are then modeled by the Support Vector Regression (SVR) forecaster. Since the ARIMA residuals tend to be nonlinear thus the proposed methodology tries to subdue these nonlinearities by utilizing the discrete wavelet transform in which the ARIMA residuals are decomposed into their high and low frequency components. In …order to optimize the value of SVR parameters a new Modified Honey Bee Mating Optimization (MHBMO) algorithm is proposed as well. The proposed MHBMO algorithm prevents the optimization process from trapping in local optimums through a new modification phase. The veracity of the proposed methodology is corroborated by applying it to the empirical load data of Fars Electric Power Company, Iran. Show more
Keywords: Support Vector Regression (SVR), Modified Honey Bee Mating Optimization (MHBMO), Short Term Load Forecasting (STLF)
DOI: 10.3233/IFS-141267
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3103-3110, 2014
Authors: Nguyen, Dzung Dinh | Ngo, Long Thanh | Watada, Junzo
Article Type: Research Article
Abstract: Multiplex Fluorescent In Situ Hybridization (M-FISH) is a multi-channel chromosome image generating technique that allows colors of the human chromosomes to be distinguished. In this technique, all chromosomes are labelled with 5 fluors and a fluorescent DNA stain called DAPI (4 in, 6-Diamidino-2-phenylindole) that attaches to DNA and labels all chromosomes. Therefore, a M-FISH image consists of 6 images, and each image is the response of the chromosome to a particular fluor. In this paper, we propose a genetic interval type-2 fuzzy c-means (GIT2FCM) algorithm, which is developed and applied to the segmentation and classification of M-FISH images. Chromosome pixels …from the DAPI channel are segmented by GIT2FCM into two clusters, and these chromosome pixels are used as a mask for the remaining five channels. Then, the GIT2FCM algorithm is applied to classify the chromosome pixels into 24 classes, which correspond to the 22 pairs of homologous chromosomes and two sexual chromosomes. The experiments performed using the M-FISH dataset show the advantages of the proposed algorithm. Show more
Keywords: Type-2 fuzzy C-neans clustering, genetic algorithms, MFISH, image segmentation
DOI: 10.3233/IFS-141268
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3111-3122, 2014
Authors: Chen, Hung-Yi
Article Type: Research Article
Abstract: The molten steel level control of strip casting process has the properties of nonlinear uncertainty and time-varying characteristics, hence, it is difficult to establish an accurate process model for designing a model-based controller to monitor the strip quality. This study develops a hybrid model-free adaptive fuzzy and neural network controller (HAFNC) which combines an adaptive rule with fuzzy and neural network control to overcome the difficulty. The proposed control strategy has online learning ability for responding to the system's nonlinear and time-varying behaviors during the molten steel level control. Since this model-free controller has simple control structure and small number …of control parameters, it is easy to implement. Numerical results based on semi-experimental system dynamic model and parameters are executed to show the control performance of the proposed intelligent controller. Show more
Keywords: Molten steel level control, strip casting process, hybrid adaptive fuzzy and neural network control
DOI: 10.3233/IFS-141269
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3123-3130, 2014
Authors: Khan, Sajid Ali | Hussain, Ayyaz | Usman, Muhammad | Nazir, Muhammad | Riaz, Naveed | Mirza, Anwar Majid
Article Type: Research Article
Abstract: Face recognition has received enormous fame in the field of pattern recognition and computer vision. Being a demanding area intensive research has been done by many researchers for more than a decade. However no standard technique exists for extracting the significant features of facial images in different categories. Techniques found in literature produces high accuracy but are computationally expensive which are not applicable in real time applications. In this paper, two well known methods, Discrete Wavelet Transform (DWT) and Weber Local Descriptor (WLD) are used to extract the face discriminative features. First for both types of features, the recognition accuracy …is separately measured. In the next step, both types of features are fused using the concatenation method to improve the accuracy rate. To select more discriminative features and reduce data dimensions, computationally efficient algorithm (Kruskal-Wallis) is used. In the last step, three classifiers (SVM, KNN and BPNN) ensemble to improve the accuracy rate. Proposed technique is more efficient in terms of time complexity as compared to GA and PSO. Yale face database is used for all experiments. The proposed technique is highly robust to facial variations like occlusion, illumination and expression change and computationally efficient as compared to existing methods. Show more
Keywords: Face recognition, feature fusion, weber local descriptor, feature selection, feature fusion
DOI: 10.3233/IFS-141270
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3131-3143, 2014
Authors: Rouhani, Seyed Hossein | Sheikholeslami, Abdolreza | Ahmadi, Roya | Hosseini, Hossein
Article Type: Research Article
Abstract: In power system any unpredictable variations of consumption load will cause fluctuation in frequency and the transferred power between the lines. Load frequency control is one of the main problems in the power system which synchronizes with automatic generation control. Checking the different factors that cause unbalance in power system is necessary and one of the important factors of them is the load that randomly varies. In this paper, a three area power system in deregulated environments with participation of synchronized generation of wind with Doubly Fed Induction Generator (DFIG), hydro and thermal power plants are studied. The load in …this power system is considered as a random variable which periodically and randomly has frequency of 0.25 around nominal amount. Fluctuations are caused due to considering load as a random variable and using wind-powered turbine with DFIG in power system. To improve the response of power system, the optimal fuzzy logic, PID controller and FACTS devices will be used. Imperialist Competitive Algorithm (ICA) has been used for optimizing the parameters of a fuzzy logic controller. PID Controller parameters have been optimized with three intelligent algorithms, ICA, Genetic Algorithm (GA) and Particle Swarm Optimization (PSO) Algorithm and the results will be compared with each other. With comparison the result it is observed that in the case of using optimal fuzzy logic controller (OFLC) we have the fastest response with the minimum over shoot and under shoot, also in this case the transferred power between the areas is settled in the lowest value. The results show a significant reduction in losses in transmission lines. Show more
Keywords: Deregulated environments, random variable load (RVL), wind-powered turbine with DFIG, load frequency control (LFC), optimal fuzzy logic controller (OFLC), intelligent algorithm
DOI: 10.3233/IFS-141271
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3145-3157, 2014
Authors: Hesamian, Gholamreza | Chachi, Jalal
Article Type: Research Article
Abstract: This paper extends the non-parametric Sign test to the case when available observations and underlying hypotheses about the population median are imprecise quantities. To do this, by using some elements of possibility theory, we suggest a ranking index among imprecise observations. The index is applied to extend the usual concepts of classical hypothesis testing problem to obtain Sing test statistic and interval p-value. Comparing p-value and a nominal significance level, the fuzzy non-parametric Sign test is constructed providing some degrees to accept or reject the imprecise hypotheses. Several numerical examples are provided throughout the paper to clarify the proposed approach. …Finally, a comprehensive review of several well-known non-parametric test approaches is given. Show more
Keywords: Fuzzy sign test, imprecise hypotheses, imprecise observations, interval p-value, necessity and possibility indices
DOI: 10.3233/IFS-141272
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3159-3167, 2014
Authors: Ghofrani, Fatemeh | Helfroush, Mohammad Sadegh | Danyali, Habibollah | Kazemi, Kamran
Article Type: Research Article
Abstract: This paper proposes a novel approach for medical x-ray image classification using fuzzification of Contourlet-based Center Symmetric Local Binary Patterns (CCS-LBPs). The proposed classification method consists of three stages. In the first stage, local features are obtained by partitioning each image into 25 overlapping sub-images, computing the 2-level contourlet transform of each subimage and extracting CS-LBPs from each resulting subband. In the second stage, fuzzy logic using reduced CCS-LBPs is employed to determine the degree of membership of subimages to each class. Finally, in order to assign images to their respective classes, we utilize membership values as the input of …classifiers such as support vector machine (SVM) and k-nearest neighbor (K-NN). This work makes a major contribution to improve the performance of these classifiers. We conducted experiments on a subset of IRMA dataset to evaluate the effectiveness of our classification scheme. Experimental results reveal that the proposed scheme not only achieves a very good performance but also learns well even with a small number of training images. Show more
Keywords: Medical x-ray images, local binary patterns, contourlet transform, fuzzy membership, image classification
DOI: 10.3233/IFS-141273
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3169-3180, 2014
Authors: Büyüközkan, Gülçin | Güleryüz, Sezin
Article Type: Research Article
Abstract: Renewable energy resources (RER) are one of the most growing energy sources in the world and various researches point out that these resources will have vital importance in the future. On the other hand, limited reserves and negative environmental impacts of fossil fuels make investors to consider RER for their needs in a sustainable way. To select most appropriate RER alternatives, it is essential to prioritize alternatives which provide minimum negative environmental impact caused by RER operations and maximum financial benefits to the investor. This study aims to develop a novel RER evaluation model that can help investors with their …critical selection process and identify the priority of RER alternatives. High complexity of socioeconomic environments often makes it difficult for a single decision maker (DM), investor in our case, to consider all important aspects of selection problems. Therefore, group decision making (GDM) is often preferred to avoid the bias and minimize the partiality in this kind of decision process. In some critical situations DMs' judgments can be under uncertainty where it is difficult for them to provide exact numerical values. In these cases, linguistic interval fuzzy preference relations are utilized to better represent DMs' preferences. This paper develops a new GDM approach based on fuzzy analytic hierarchy process (AHP) with linguistic interval fuzzy preference relations for obtaining weights of selected evaluation criteria. Then, the fuzzy technique for order performance by similarity to ideal solution (TOPSIS) approach is applied for ranking suitable RER alternatives. The originality of the paper comes from the application of these combined methodologies in literature for the first time and no previous work has investigated this RER subject using this kind of an integrated method. For demonstrating the potential of the proposed approach, a motivated example is given to select the most suitable RER for Turkey. Show more
Keywords: Renewable energy resources, MCDM, group decision making, AHP, Linguistic interval fuzzy references, fuzzy TOPSIS
DOI: 10.3233/IFS-141275
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3181-3195, 2014
Authors: Siahi, Mehdi | Rahatabad, Fereidoun Nowshiravan | Khayat, Omid | Razjouyan, Javad | Nejad, Hadi Chahkandi
Article Type: Research Article
Abstract: In this paper largest Lyapunov exponent and low frequency power ratio of the Center-of-Pressure (COP) signal are calculated and considered as two discriminative features to characterize prolonged standing and its effect on postural control in elderly individuals in comparison to adults. It is unknown how elderly individuals behave during standing and how demanding such a task is for them. We recorded the center of pressure position of 16 elder subjects and 24 young subjects while they performed standing (30 second). Statistical and frequency-based features are extracted and an analysis is performed to find the most appropriate and discriminative features for …elder and young subjects posture signals discrimination. Standard deviation and mean value as statistical parameters, low frequency power ratio as frequency based feature and largest Lyapunov exponent (LLE) of COP signal as the chaotic feature are computed to discriminate the COP signals of young and old subjects. LLE is estimated to show the impact of chaotic behavior in static balance relative to the age. Implementations on the normal subjects demonstrate that working in frequency and chaotic domains is preferred to time domain and statistical analysis and largest Lyapunov exponent of the posture signal can be representatively used for COP signal characterization. Show more
Keywords: Static balance, center of pressure signal, age-related analysis, largest lyapunov exponent, standard deviation, low frequency power ratio
DOI: 10.3233/IFS-141276
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3197-3204, 2014
Authors: Manjusha, O.T. | Sunitha, M.S.
Article Type: Research Article
Abstract: In this paper different types of degrees of a node in fuzzy graphs are discussed. The domination number of $K_{\sigma_{1},\sigma_{2}}$ as given in the paper “Domination in fuzzy graphs-I” by A. Somasundaram and S. Somasundaram is modified. A lower bound and an upper bound for the domination number of fuzzy graphs are obtained. Domination in fuzzy trees is studied. It is established that the set of fuzzy cut nodes of a fuzzy tree is a dominating set and obtained a necessary and sufficient condition for the set of fuzzy end nodes to be a dominating set. Also it …is proved that in a fuzzy tree each node of a dominating set is incident on a fuzzy bridge. Show more
Keywords: Fuzzy graph, strong arcs, domination number
DOI: 10.3233/IFS-141277
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3205-3212, 2014
Authors: Gnana King, G.R. | Seldev Christopher, C.
Article Type: Research Article
Abstract: Compression and transmission of compound images are essential processes in real time applications where there is a necessity that the compression technique should attain high compression ratio, low complexity, high PSNR value and a required level of security. This paper proposes a novel method for block-based compound image compression. The pictorial blocks and text/graphics blocks are separated from the compound image. The pictorial blocks are compressed using discrete Haar wavelet transformation and text/graphics colors are mapped to primary colors using color quantization algorithm and the resulting index values are then compressed using the lossless Huffman coding technique. The compressed image …is then encrypted using an Advanced Encryption Standard algorithm which ensures that the transmission is fast and highly secured. Experimental results conclude that the proposed algorithm provides better results like low complexity, high compression ratio and a high PSNR value than most of the other image compression techniques. Show more
Keywords: Compound image compression, haar wavelet transformation, huffman coding and advanced encryption standard algorithm
DOI: 10.3233/IFS-141278
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3213-3225, 2014
Article Type: Other
Citation: Journal of Intelligent & Fuzzy Systems, vol. 27, no. 6, pp. 3227-3240, 2014
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl