Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 160.00Authors: Li, Zhiyuan | Liu, Yi | Zhang, Pengcheng | Lu, Jing | Gui, Zhiguo
Article Type: Research Article
Abstract: In the medical field, computed tomography (CT) is a commonly used examination method, but the radiation generated increases the risk of illness in patients. Therefore, low-dose scanning schemes have attracted attention, in which noise reduction is essential. We propose a purposeful and interpretable decomposition iterative network (DISN) for low-dose CT denoising. This method aims to make the network design interpretable and improve the fidelity of details, rather than blindly designing or using deep CNN architecture. The experiment is trained and tested on multiple data sets. The results show that the DISN method can restore the low-dose CT image structure and …improve the diagnostic performance when the image details are limited. Compared with other algorithms, DISN has better quantitative and visual performance, and has potential clinical application prospects. Show more
Keywords: LDCT, decomposition, image denoising, iteration, CNN
DOI: 10.3233/XST-230272
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 493-512, 2024
Authors: Li, Haoyan | Li, Zhentao | Gao, Shuaiyi | Hu, Jiaqi | Yang, Zhihao | Peng, Yun | Sun, Jihang
Article Type: Research Article
Abstract: OBJECTIVES: To evaluate the performance of deep learning image reconstruction (DLIR) algorithm in dual-energy spectral CT (DEsCT) as a function of radiation dose and image energy level, in comparison with filtered-back-projection (FBP) and adaptive statistical iterative reconstruction-V (ASIR-V) algorithms. METHODS: An ACR464 phantom was scanned with DEsCT at four dose levels (3.5 mGy, 5 mGy, 7.5 mGy, and 10 mGy). Virtual monochromatic images were reconstructed at five energy levels (40 keV, 50 keV, 68 keV, 74 keV, and 140 keV) using FBP, 50% and 100% ASIR-V, DLIR at low (DLIR-L), medium (DLIR-M), and high (DLIR-H) settings. The noise power spectrum (NPS), task-based transfer function (TTF) and detectability …index (d’) were computed and compared among reconstructions. RESULTS: NPS area and noise increased as keV decreased, with DLIR having slower increase than FBP and ASIR-V, and DLIR-H having the lowest values. DLIR had the best 40 keV/140 keV noise ratio at various energy levels, DLIR showed higher TTF (50%) than ASIR-V for all materials, especially for the soft tissue-like polystyrene insert, and DLIR-M and DLIR-H provided higher d’ than DLIR-L, ASIR-V and FBP in all dose and energy levels. As keV increases, d’ increased for acrylic insert, and d’ of the 50 keV DLIR-M and DLIR-H images at 3.5 mGy (7.39 and 8.79, respectively) were higher than that (7.20) of the 50 keV ASIR-V50% images at 10 mGy. CONCLUSIONS: DLIR provides better noise containment for low keV images in DEsCT and higher TTF(50%) for the polystyrene insert over ASIR-V. DLIR-H has the lowest image noise and highest detectability in all dose and energy levels. DEsCT 50 keV images with DLIR-M and DLIR-H show potential for 65% dose reduction over ASIR-V50% withhigher d’. Show more
Keywords: Multidetector computed tomography, image enhancement, image reconstruction, deep learning
DOI: 10.3233/XST-230333
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 513-528, 2024
Authors: Cui, Wei | Lv, Haipeng | Wang, Jiping | Zheng, Yanyan | Wu, Zhongyi | Zhao, Hui | Zheng, Jian | Li, Ming
Article Type: Research Article
Abstract: BACKGROUND: Photon-counting computed tomography (Photon counting CT) utilizes photon-counting detectors to precisely count incident photons and measure their energy. These detectors, compared to traditional energy integration detectors, provide better image contrast and material differentiation. However, Photon counting CT tends to show more noticeable ring artifacts due to limited photon counts and detector response variations, unlike conventional spiral CT. OBJECTIVE: To comprehensively address this issue, we propose a novel feature shared multi-decoder network (FSMDN) that utilizes complementary learning to suppress ring artifacts in Photon counting CT images. METHODS: Specifically, we employ a feature-sharing encoder to extract context …and ring artifact features, facilitating effective feature sharing. These shared features are also independently processed by separate decoders dedicated to the context and ring artifact channels, working in parallel. Through complementary learning, this approach achieves superior performance in terms of artifact suppression while preserving tissue details. RESULTS: We conducted numerous experiments on Photon counting CT images with three-intensity ring artifacts. Both qualitative and quantitative results demonstrate that our network model performs exceptionally well in correcting ring artifacts at different levels while exhibiting superior stability and robustness compared to the comparison methods. CONCLUSIONS: In this paper, we have introduced a novel deep learning network designed to mitigate ring artifacts in Photon counting CT images. The results illustrate the viability and efficacy of our proposed network model as a new deep learning-based method for suppressing ring artifacts. Show more
Keywords: Photon counting CT, ring artifact suppression, feature shared multi-decoder network, complementary learning
DOI: 10.3233/XST-230396
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 529-547, 2024
Authors: Lu, Chang | Han, Zhenye | Zou, Jing
Article Type: Research Article
Abstract: BACKGROUND: Projection Domain Decomposition (PDD) is a dual energy reconstruction method which implements the decomposition process before image reconstruction. The advantage of PDD is that it can alleviate beam hardening artifacts and metal artifacts effectively as energy spectra estimation is considered in PDD. However, noise amplification occurs during the decomposition process, which significantly impacts the accuracy of effective atomic number and electron density. Therefore, effective noise reduction techniques are required in PDD. OBJECTIVE: This study aims to develop a new algorithm capable of minimizing noise while simultaneously preserving edges and fine details. METHODS: In this study, …a denoising algorithm based on low rank and similarity-based regularization (LRSBR) is presented. This algorithm incorporates the low-rank characteristic of tensors into similarity-based regularization (SBR) framework. This method effectively addresses the issue of instability in edge pixels within the SBR algorithm and enhances the structural consistency of dual-energy images. RESULTS: A series of simulation and practical experiments were conducted on a dual-layer dual-energy CT system. Experiments demonstrate that the proposed method outperforms exiting noise removal methods in Peak Signal-to-noise Ratio (PSNR), Root Mean Square Error (RMSE), and Structural Similarity (SSIM). Meanwhile, there has been a notable enhancement in the visual quality of CT images. CONCLUSIONS: The proposed algorithm has a significantly improved noise reduction compared to other competing approach in dual-energy CT. Meanwhile, the LRSBR method exhibits outstanding performance in preserving edges and fine structures, making it practical for PDD applications. Show more
Keywords: Dual-energy computed tomography, projection domain decomposition, Low rank, similarity-based regularization
DOI: 10.3233/XST-230248
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 549-568, 2024
Authors: Gao, Kai | Ma, Ze-Peng | Zhang, Tian-Le | Liu, Yi-Wen | Zhao, Yong-Xia
Article Type: Research Article
Abstract: PURPOSE: To compare image quality, iodine intake, and radiation dose in overweight and obese patients undergoing abdominal computed tomography (CT) enhancement using different scanning modes and contrast medium. METHODS: Ninety overweight and obese patients (25 kg/m2 ≤body mass index (BMI)< 30 kg/m2 and BMI≥30 kg/m2 ) who underwent abdominal CT-enhanced examinations were randomized into three groups (A, B, and C) of 30 each and scanned using gemstone spectral imaging (GSI) +320 mgI/ml, 100 kVp + 370 mgI/ml, and 120 kVp + 370 mgI/ml, respectively. Reconstruct monochromatic energy images of group A at 50–70 keV (5 keV interval). The iodine intake and radiation dose of each group were recorded …and calculated. The CT values, contrast-to-noise ratios (CNRs), and subjective scores of each subgroup image in group A versus images in groups B and C were by using one-way analysis of variance or Kruskal–Wallis H test, and the optimal keV of group A was selected. RESULTS: The dual-phase CT values and CNRs of each part in group A were higher than or similar to those in groups B and C at 50–60 keV, and similar to or lower than those in groups B and C at 65 keV and 70 keV. The subjective scores of the dual-phase images in group A were lower than those of groups B and C at 50 keV and 55 keV, whereas no significant difference was seen at 60–70 keV. Compared to groups B and C, the iodine intake in group A decreased by 12.5% and 13.3%, respectively. The effective doses in groups A and B were 24.7% and 25.8% lower than those in group C, respectively. CONCLUSION: GSI +320 mgI/ml for abdominal CT-enhanced in overweight patients satisfies image quality while reducing iodine intake and radiation dose, and the optimal keV was 60 keV. Show more
Keywords: Abdominal CT enhancement, gemstone spectral imaging, radiation dose, low tube voltage, low-concentration contrast medium
DOI: 10.3233/XST-230327
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 569-581, 2024
Authors: Cao, Kun | Gao, Fei | Long, Rong | Zhang, Fan-Dong | Huang, Chen-Cui | Cao, Min | Yu, Yi-Zhou | Sun, Ying-Shi
Article Type: Research Article
Abstract: PURPOSE: The explore the added value of peri-calcification regions on contrast-enhanced mammography (CEM) in the differential diagnosis of breast lesions presenting as only calcification on routine mammogram. METHODS: Patients who underwent CEM because of suspicious calcification-only lesions were included. The test set included patients between March 2017 and March 2019, while the validation set was collected between April 2019 and October 2019. The calcifications were automatically detected and grouped by a machine learning-based computer-aided system. In addition to extracting radiomic features on both low-energy (LE) and recombined (RC) images from the calcification areas, the peri-calcification regions, which is …generated by extending the annotation margin radially with gradients from 1 mm to 9 mm, were attempted. Machine learning (ML) models were built to classify calcifications into malignant and benign groups. The diagnostic matrices were also evaluated by combing ML models with subjective reading. RESULTS: Models for LE (significant features: wavelet-LLL_glcm_Imc2_MLO; wavelet-HLL_firstorder_Entropy_MLO; wavelet-LHH_glcm_DifferenceVariance_CC; wavelet-HLL_glcm_SumEntropy_MLO;wavelet-HLH_glrlm_ShortRunLowGray LevelEmphasis_MLO; original_firstorder_Entropy_MLO; original_shape_Elongation_MLO) and RC (significant features: wavelet-HLH_glszm_GrayLevelNonUniformityNormalized_MLO; wavelet-LLH_firstorder_10Percentile_CC; original_firstorder_Maximum_MLO; wavelet-HHH_glcm_Autocorrelation_MLO; original_shape_Elongation_MLO; wavelet-LHL_glszm_GrayLevelNonUniformityNormalized_MLO; wavelet-LLH_firstorder_RootMeanSquared_MLO) images were set up with 7 features. Areas under the curve (AUCs) of RC models are significantly better than those of LE models with compact and expanded boundary (RC v.s. LE, compact: 0.81 v.s. 0.73, p < 0.05; expanded: 0.89 v.s. 0.81, p < 0.05) and RC models with 3 mm boundary extension yielded the best performance compared to those with other sizes (AUC = 0.89). Combining with radiologists’ reading, the 3mm-boundary RC model achieved a sensitivity of 0.871 and negative predictive value of 0.937 with similar accuracy of 0.843 in predicting malignancy. CONCLUSIONS: The machine learning model integrating intra- and peri-calcification regions on CEM has the potential to aid radiologists’ performance in predicting malignancy of suspicious breast calcifications. Show more
Keywords: Breast neoplasms, calcifications, machine learning, mammography, contrast media
DOI: 10.3233/XST-230332
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 583-596, 2024
Authors: Lu, Tianyu | Ma, Jianbing | Zou, Jiajun | Jiang, Chenxu | Li, Yangyang | Han, Jun
Article Type: Research Article
Abstract: BACKGROUND: The main metastatic route for lung cancer is lymph node metastasis, and studies have shown that non-small cell lung cancer (NSCLC) has a high risk of lymph node infiltration. OBJECTIVE: This study aimed to compare the performance of handcrafted radiomics (HR) features and deep transfer learning (DTL) features in Computed Tomography (CT) of intratumoral and peritumoral regions in predicting the metastatic status of NSCLC lymph nodes in different machine learning classifier models. METHODS: We retrospectively collected data of 199 patients with pathologically confirmed NSCLC. All patients were divided into training (n = 159) and validation (n … = 40) cohorts, respectively. The best HR and DTL features in the intratumoral and peritumoral regions were extracted and selected, respectively. Support Vector Machine (SVM), k-Nearest Neighbors (KNN), Light Gradient Boosting Machine (Light GBM), Multilayer Perceptron (MLP), and Logistic Regression (LR) models were constructed, and the performance of the models was evaluated. RESULTS: Among the five models in the training and validation cohorts, the LR classifier model performed best in terms of HR and DTL features. The AUCs of the training cohort were 0.841 (95% CI: 0.776–0.907) and 0.955 (95% CI: 0.926–0.983) , and the AUCs of the validation cohort were 0.812 (95% CI: 0.677–0.948) and 0.893 (95% CI: 0.795–0.991) , respectively. The DTL signature was superior to the handcrafted radiomics signature. CONCLUSIONS: Compared with the radiomics signature, the DTL signature constructed based on intratumoral and peritumoral areas in CT can better predict NSCLC lymph node metastasis. Show more
DOI: 10.3233/XST-230326
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 597-609, 2024
Authors: Tai, Duong Thanh | Nhu, Nguyen Tan | Tuan, Pham Anh | Sulieman, Abdelmoneim | Omer, Hiba | Alirezaei, Zahra | Bradley, David | Chow, James C.L.
Article Type: Research Article
Abstract: BACKGROUND: Accurate diagnosis and subsequent delineated treatment planning require the experience of clinicians in the handling of their case numbers. However, applying deep learning in image processing is useful in creating tools that promise faster high-quality diagnoses, but the accuracy and precision of 3-D image processing from 2-D data may be limited by factors such as superposition of organs, distortion and magnification, and detection of new pathologies. The purpose of this research is to use radiomics and deep learning to develop a tool for lung cancer diagnosis. METHODS: This study applies radiomics and deep learning in the diagnosis …of lung cancer to help clinicians accurately analyze the images and thereby provide the appropriate treatment planning. 86 patients were recruited from Bach Mai Hospital, and 1012 patients were collected from an open-source database. First, deep learning has been applied in the process of segmentation by U-NET and cancer classification via the use of the DenseNet model. Second, the radiomics were applied for measuring and calculating diameter, surface area, and volume. Finally, the hardware also was designed by connecting between Arduino Nano and MFRC522 module for reading data from the tag. In addition, the displayed interface was created on a web platform using Python through Streamlit. RESULTS: The applied segmentation model yielded a validation loss of 0.498, a train loss of 0.27, a cancer classification validation loss of 0.78, and a training accuracy of 0.98. The outcomes of the diagnostic capabilities of lung cancer (recognition and classification of lung cancer from chest CT scans) were quite successful. CONCLUSIONS: The model provided means for storing and updating patients’ data directly on the interface which allowed the results to be readily available for the health care providers. The developed system will improve clinical communication and information exchange. Moreover, it can manage efforts by generating correlated and coherent summaries of cancer diagnoses. Show more
Keywords: Lung cancer, deep learning-based diagnosis, radiomics, computer-aided diagnosis
DOI: 10.3233/XST-230255
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 611-622, 2024
Authors: Gopatoti, Anandbabu | Jayakumar, Ramya | Billa, Poornaiah | Patteeswaran, Vijayalakshmi
Article Type: Research Article
Abstract: BACKGROUND: COVID-19 needs to be diagnosed and staged to be treated accurately. However, prior studies’ diagnostic and staging abilities for COVID-19 infection needed to be improved. Therefore, new deep learning-based approaches are required to aid radiologists in detecting and quantifying COVID-19-related lung infections. OBJECTIVE: To develop deep learning-based models to classify and quantify COVID-19-related lung infections. METHODS: Initially, Dual Decoder Attention-based Semantic Segmentation Networks (DDA-SSNets) such as Dual Decoder Attention-UNet (DDA-UNet) and Dual Decoder Attention-SegNet (DDA-SegNet) are proposed to facilitate the dual segmentation tasks such as lung lobes and infection segmentation in chest X-ray (CXR) images. …The lung lobe and infection segmentations are mapped to grade the severity of COVID-19 infection in both the lungs of CXRs. Later, a Genetic algorithm-based Deep Convolutional Neural Network classifier with the optimum number of layers, namely GADCNet, is proposed to classify the extracted regions of interest (ROI) from the CXR lung lobes into COVID-19 and non-COVID-19. RESULTS: The DDA-SegNet shows better segmentation with an average BCSSDC of 99.53% and 99.97% for lung lobes and infection segmentations, respectively, compared with DDA-UNet with an average BCSSDC of 99.14% and 99.92%. The proposed DDA-SegNet with GADCNet classifier offered excellent classification results with an average BCCAC of 99.98%, followed by the GADCNet with DDA-UNet with an average BCCAC of 99.92% after extensive testing and analysis. CONCLUSIONS: The results show that the proposed DDA-SegNet has superior performance in the segmentation of lung lobes and COVID-19-infected regions in CXRs, along with improved severity grading compared to the DDA-UNet and improved accuracy of the GADCNet classifier in classifying the CXRs into COVID-19, and non-COVID-19. Show more
Keywords: X-ray images, semantic segmentation, lung lobe segmentation, infection segmentation, genetic algorithm
DOI: 10.3233/XST-230421
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 623-649, 2024
Authors: Shankarlal, B. | Dhivya, S. | Rajesh, K. | Ashok, S.
Article Type: Research Article
Abstract: BACKGROUND: Thyroid tumor is considered to be a very rare form of cancer. But recent researches and surveys highlight the fact that it is becoming prevalent these days because of various factors. OBJECTIVES: This paper proposes a novel hybrid classification system that is able to identify and classify the above said four different types of thyroid tumors using high end artificial intelligence techniques. The input data set is obtained from Digital Database of Thyroid Ultrasound Images through Kaggle repository and augmented for achieving a better classification performance using data warping mechanisms like flipping, rotation, cropping, scaling, and shifting. …METHODS: The input data after augmentation goes through preprocessing with the help of bilateral filter and is contrast enhanced using dynamic histogram equalization. The ultrasound images are then segmented using SegNet algorithm of convolutional neural network. The features needed for thyroid tumor classification are obtained from two different algorithms called CapsuleNet and EfficientNetB2 and both the features are fused together. This process of feature fusion is carried out to heighten the accuracy of classification. RESULTS: A Multilayer Perceptron Classifier is used for classification and Bonobo optimizer is employed for optimizing the results produced. The classification performance of the proposed model is weighted using metrics like accuracy, sensitivity, specificity, F1-score, and Matthew’s correlation coefficient. CONCLUSION: It can be observed from the results that the proposed multilayer perceptron based thyroid tumor type classification system works in an efficient manner than the existing classifiers like CANFES, Spatial Fuzzy C means, Deep Belief Networks, Thynet and Generative adversarial network and Long Short-Term memory. Show more
Keywords: Thyroid tumor, bilateral filter, dynamic histogram equalization, feature fusion, segnet, multilayer perceptron, capsulenet
DOI: 10.3233/XST-230430
Citation: Journal of X-Ray Science and Technology, vol. 32, no. 3, pp. 651-675, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl