Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Purchase individual online access for 1 year to this journal.
Price: EUR 185.00Authors: Monteleone, Adrian | Schary, Weronika | Fath, Andreas | Wenzel, Folker
Article Type: Research Article
Abstract: INTRODUCTION: Since the beginning of industrial production in 1950, plastic production has continued to grow strongly worldwide and is now at 322 million tonnes in the year 2015. From these very high production volumes ever larger quantities are found in the environment. There the plastics degradate to microplasticity and spread ubiquitously in the world. The present work deals with the possible uptake of microplastic particles in human organisms. For the detection of these plastic particles, an extraction method was developed and validated. MATERIALS AND METHODS: Biological materials consist of human blood (healthy volunteers, n = 4) and different tissues …of pigs and cattles. Various lysis solutions were tested for degradation efficiency of biological material and for effects on the plastics. The mass loss, surfaces and structure variations as well as the physicochemical spectrum of the material were observed after treatment by atomic force (AFM) and electron microscopy (EM) and Fourier transform infrared spectrometry (FTIR). RESULTS: The different plastic types as polyamide (PA), polycarbonate (PC), polyethylene (PE), polypropylene (PP), polystyrene (PS) and polyvinyl chloride (PVC) could be clearly differentiated and identified by FTIR. Regarding the surface control, especially PVC showed detectable alterations: After extraction an irregular surface structure caused by protuberances or bubbles could be observed. However, instead of these alterations an equivalent count of plastic particles was found in correlation to the applied plastic amount (recovery rate overall was 99,12±0,67%). CONCLUSION: The applied method can be used for plastic extractions from human or animal tissues without remarkable effects on the plastics. Show more
Keywords: Microplastic, microparticel, extraction method, human tissue
DOI: 10.3233/CH-199209
Citation: Clinical Hemorheology and Microcirculation, vol. 73, no. 1, pp. 203-217, 2019
Authors: Sun, Xianlei | Tung, Wingtai | Wang, Weiwei | Xu, Xun | Zou, Jie | Gould, Oliver E. C. | Kratz, Karl | Ma, Nan | Lendlein, Andreas
Article Type: Research Article
Abstract: Electrospinning has attracted significant attention as a method to produce cell culture substrates whose fibrous structure mimics the native extracellular matrix (ECM). In this study, the influence of E-modulus of fibrous substrates on the lineage commitment of human adipose-derived stem cells (hADSCs) was studied using fiber meshes prepared via the electrospinning of a polyetheresterurethane (PEEU) consisting of poly(ρ -dioxanone) (PPDO) and poly(ɛ -caprolactone) (PCL) segments. The PPDO: PCL weight ratio was varied from 40:60 to 70:30 to adjust the physiochemical properties of the PEEU fibers. The cells attached on stiffer PEEU70 (PPDO:PCL,= 70:30) fiber meshes displayed an elongated morphology compared to …those cultured on softer fibers. The nuclear aspect ratio (width vs. length of a nucleus) of hADSCs cultured on softer PEEU40 (PPDO:PCL = 40:60) fibers was lower than on stiffer fibers. The osteogenic differentiation of hADSCs was enhanced by culturing on stiffer fibers. Compared to PEEU40, a 73% increase of osteocalcin expression and a 34% enhancement of alkaline phosphatase (ALP) activity was observed in cells on PEEU70. These results demonstrated that the differentiation commitment of stem cells could be regulated via tailoring the mechanical properties of electrospun fibers. Show more
Keywords: Electrospun fibers, polyetheresterurethane, E-modulus, mesenchymal stem cells, osteogenic differentiation
DOI: 10.3233/CH-199206
Citation: Clinical Hemorheology and Microcirculation, vol. 73, no. 1, pp. 219-228, 2019
Authors: Tung, Wing Tai | Wang, Weiwei | Liu, Yue | Gould, Oliver E. C. | Kratz, Karl | Ma, Nan | Lendlein, Andreas
Article Type: Research Article
Abstract: The mechanical properties of electrospun fiber meshes typically are measured by tensile testing at the macro-scale without precisely addressing the spatial scale of living cells and their submicron architecture. Atomic force microscopy (AFM) enables the examination of the nano- and micro-mechanical properties of the fibers with potential to correlate the structural mechanical properties across length scales with composition and functional behavior. In this study, a polyesteretherurethane (PEEU) polymer containing poly(p -dioxanone) (PPDO) and poly(ɛ -caprolactone) (PCL) segments was electrospun into fiber meshes or suspended single fibers. We employed AFM three point bending testing and AFM force mapping to measure the …elastic modulus and stiffness of individual micro/nanofibers and the fiber mesh. The local stiffness of the fiber mesh including the randomized, intersecting structure was also examined for each individual fiber. Force mapping results with a set point of 50 nN demonstrated the dependence of the elasticity of a single fiber on the fiber mesh architecture. The non-homogeneous stiffness along the same fiber was attributed to the intersecting structure of the supporting mesh morphology. The same fiber measured at a point with and without axial fiber support showed a remarkable difference in stiffness, ranging from 0.2 to 10 nN/nm respectively. For the region, where supporting fibers densely intersected, the stiffness was found to be considerably higher. In the region where the degrees of freedom of the fibers was not restricted, allowing greater displacement, the stiffness were observed to be lower. This study elucidates the relationship between architecture and the mechanical properties of a micro/nanofiber mesh. By providing a greater understanding of the role of spatial arrangement and organization on the surface mechanical properties of such materials, we hope to provide insight into the design of microenvironments capable of regulating cell functionality. Show more
Keywords: Biomaterials, AFM, electrospinning, elastic modulus, force mapping
DOI: 10.3233/CH-199201
Citation: Clinical Hemorheology and Microcirculation, vol. 73, no. 1, pp. 229-236, 2019
Authors: Zou, Jie | Wang, Weiwei | Nie, Yan | Xu, Xun | Ma, Nan | Lendlein, Andreas
Article Type: Research Article
Abstract: Laminin-5 (Ln-5), an important extracellular matrix (ECM) protein, plays a critical role in regulating the growth and differentiation of mesodermal tissues, including bone. Ln-5 can be secreted by the mesenchymal stem cells (MSCs), and Ln-5 promotes MSCs osteogenic differentiation. It has been demonstrated that a substrate’s surface topography could regulate MSC secretion and differentiation. A better understanding of the mechanism of how Ln-5 and surface roughness regulate MSC osteogenic differentiation would guide the design of surface topography and coatings of orthopedic implants and cell culture substrates. However, few studies have investigated the relationship between surface roughness and the secretion of …Ln-5 in MSC osteogenic differentiation. Whether substrate surface topography regulates MSC differentiation via regulating Ln-5 secretion and how surface topography contributes to the secretion of Ln-5 are still not known. In this study, the influence of microscale roughness at different levels (R0, R1 and R2) on the secretion of Ln-5 of human bone marrow MSCs (hBMSCs) and subsequent osteogenic differentiation were examined. hBMSCs spreading, distribution and morphology were greatly affected by different roughness levels. A significantly higher level of Ln-5 secretion was detected on R2, which correlated to the local cell density regulated by the rough surface. Ln-5 binding integrins (α 2 and α 3) were strongly activated on R2. In addition, the results from hBMSCs on R0 inserts with different cell densities further confirmed that local cell density regulated Ln-5 secretion and cell surface integrin activation. In addition, the mineralization level of MSCs on R2 was remarkably higher than that on R0 and R1. These results suggest that hBMSC osteogenic differentiation level on R2 roughness was enhanced via increased Ln-5 secretion that was attributed to rough surface regulated local cell density. Thus, the microroughness could serve as effective topographical stimulus in cell culture devices and bone implant materials. Show more
Keywords: Mesenchymal stem cells, roughness, cell density, laminin-5, osteogenesis
DOI: 10.3233/CH-199205
Citation: Clinical Hemorheology and Microcirculation, vol. 73, no. 1, pp. 237-247, 2019
Authors: Schulz, Christian | Kammerer, Sarah | Küpper, Jan-Heiner
Article Type: Research Article
Abstract: BACKGROUND: Human hepatocyte in vitro cell culture systems are important models for drug development and toxicology studies in the context of liver xenobiotic metabolism. Often, such culture systems are used to elucidate the biotransformation of xenobiotics or drugs and further investigate drug and drug metabolite effects on biological systems in terms of potential therapeutic benefit or toxicity. Human hepatocytes currently used for such in vitro studies are mostly primary cells or cell lines derived from liver cancers. Both approaches have limitations such as low proliferation capacity and progressive dedifferentiation found in primary cells or lack of liver functions …in cell lines, which makes it difficult to reliably predict biotransformation of xenobiotics in patients. In order to overcome these limitations, HepaFH3 cells and Upcyte® hepatocytes representing primary-like hepatocytes of the first and second generation are increasingly used. Based on primary human hepatocyte cells transduced for stable expression of Upcyte® proliferation genes, they are mitotically active and exhibit liver functions over an extended period, making them comparable to primary human hepatocytes. These hepatocyte models show active liver metabolism such as urea and glycogen formation as well as biotransformation of xenobiotics. The latter is based on the expression, activity and inducibility of cytochrome P450 enzymes (CYP) as essential phase I reaction components. However, for further characterisation in terms of performance and existing limitations, additional studies are needed to elucidate the mechanisms involved in phase I reactions. One prerequisite is sufficient activity of microsomal NADPH-cytochrome P450 reductase (POR) functionally connected as electron donor to those CYP enzymes. OBJECTIVE: For Upcyte® hepatocytes and HepaFH3 cells, it is so far unknown to what extent POR is expressed, active, and may exert CYP-modulating effects. Here we studied POR expression and corresponding enzyme activity in human hepatoblastoma cell line HepG2 and compared this with HepaFH3 and Upcyte® hepatocytes representing proliferating primary-like hepatocytes. METHODS: POR expression of those hepatocyte models was determined at mRNA and protein level using qRT-PCR, Western Blot and immunofluorescence staining. Kinetic studies on POR activity in isolated microsomes were performed by a colorimetric method. RESULTS: The investigated hepatocyte models showed remarkable differences at the level of POR expression. Compared to primary-like hepatocytes, POR expression of HepG2 cells was 4-fold higher at mRNA and 2-fold higher at protein level. However, this higher expression did not correlate with corresponding enzyme activity levels in isolated microsomes, which were comparable between all cell systems tested. A tendency of higher POR activity in HepG2 cells compared to HepaFH3 (p = 0.0829) might be present. Compared to primary human hepatocyte microsomes, POR activity was considerably lower in all hepatocyte models. CONCLUSION: In summary, our study revealed that POR expression and activity were clearly detectable in all in vitro hepatocyte models with the highest POR expression in cancer cell line HepG2. However, POR activity was lower in tested hepatocyte models when compared to human primary hepatocyte microsomes. Whether this was caused by e.g. polymorphisms or metabolic differences of investigated hepatocyte models will be target for future studies. Show more
Keywords: Biotransformation, CYP, cytochrome P450 monooxygenase, HepaFH3, HepG2, hepatocytes, NADPH-cytochrome P450 reductase, POR, Upcyte® hepatocytes, xenobiotics
DOI: 10.3233/CH-199226
Citation: Clinical Hemorheology and Microcirculation, vol. 73, no. 1, pp. 249-260, 2019
Authors: Lamby, P. | Krüger-Genge, A. | Franke, R.P. | Mrowietz, C. | Falter, J. | Graf, S. | Schellenberg, E.L. | Jung, F. | Prantl, L.
Article Type: Research Article
Abstract: Repeated injections of iodinated contrast media (CM) can lead to a deterioration of the renal blood flow, can redistribute blood from the renal cortex to other parts of the kidney and can cause small decreases of the blood flow in cortical capillaries, a significant reduction in blood flow in peritubular capillaries and a significant reduction in blood flow in the vasa recta. Therefore, a study in pigs was designed, to show whether the repeated injection of CM boli, alone, can cause a reduction of oxygenation in the cortico-medullar renal tissue – the region with the highest oxygen demand in the …kidney - of pigs. While the mean pO2 -value had only decreased by 0.3 mmHg from 29.9±4.3 mmHg to 29.6±4.3 mmHg (p = 0.8799) after the tenth Iodixanol bolus, it decreased by 5.9 mmHg from 34.0±4.3 mmHg to 28.1±4.3 mmHg after the tenth Iopromide bolus (p = 0.044). This revealed a remarkable difference in the influence of these CM on the oxygen partial pressure in the kidney. Repeated applications of CM had a significant influence on the renal oxygen partial pressure. In line with earlier studies showing a redistribution of blood from the cortex to other renal areas, this study revealed that Iodixanol – in contrast to Iopromide - induced no changes in the pO2 in the cortico-medullar region which confirms that Iodixanol did not hinder the flow of blood through the renal micro-vessels. These results are in favor of a hypothesis from Brezis that a microcirculatory disorder might be the basis for the development of CI-AKI. Show more
Keywords: Contrast agent, Iodixanol, Iopromide, tissue oxygen partial pressure, CI-AKI, contrast-induced acute kidney injury
DOI: 10.3233/CH-199009
Citation: Clinical Hemorheology and Microcirculation, vol. 73, no. 1, pp. 261-270, 2019
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl