Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Lafrance, Hugues; | Yahia, L'Hocine | Germain, Lucie; | Guillot, Michel | Auger, François A.; ;
Affiliations: Institut de Génie Biomédical, École Polytechnique de Montréal, Montréal, Québec, Canada, H3C 3A7 | Laboratoire de Recherche des Grands Brûlés/Laboratoire d'Organogénèse Expérimentale, Hôpital du Saint-Sacrement Québec, Québec, Canada, G1S 4L8 | Département de Chirurgie, Université Laval, Québec, Canada, G1K 7P4 | Département de Génie Mécanique, Université Laval, Québec, Canada, G1K 7P4
Note: [] Author to whom correspondence should be addressed.
Abstract: The living skin equivalent is one of the more advanced clinical applications in the field of tissue engineering. It is a promising therapeutic option for bum victims and a strong potential for manifold in vitro experiments. However, researchers have encountered major drawbacks in the reconstruction of the dermal layer. Peripheral anchorage of the dermal equivalent component has been a valuable solution to many of these problems. In this work, we have carried out the mechanical analysis of skin equivalent models, based on this dermal anchoring technique, with a study of their biaxial tensile properties. Differences between models were related to the origin of collagen, either bovine or human, and on the culture techniques: immersion or at the air-liquid interface. The study was accomplished in vitro using 25.4-mm-diameter disk-shaped specimens with an indentation test. In appropriate wet condition, the specimens were punctured with a spherical tip at a quasi-static rate. We measured the load applied against the tip vs deflection up to the breaking point. Our results show that skin equivalents presented a typical exponential load-deflection relationship. All skin equivalents presented large extensibility up to 1.41 expressed in a ratio of deflection vs specimen's radius. The maximum tensile strength (0.871–1.169 Newton) and energy calculations (3.75–6.432 N·mm) was offered by living skin equivalent, made with human types I and III collagens, cultured at the air-liquid interface. In these conditions, our results suggest the tensile properties of living skin equivalents were enhanced due to the development of well stratified stratum corneum.
Keywords: human collagen, dermal equivalent, skin substitute, mechanical properties, tissue engineering
DOI: 10.3233/BME-1995-5401
Journal: Bio-Medical Materials and Engineering, vol. 5, no. 4, pp. 195-208, 1995
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl