Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: 2nd International Conference on New Biomedical Materials, 5–8 April 2003, Cardiff, Wales, UK
Article type: Research Article
Authors: Shaheen, Sharif M. | Takezoe, Kazuma | Yamaura, Kazuo
Affiliations: Graduate School of Science and Technology, Shinshu University, Tokida 3‐15‐1, Ueda, Nagano 386‐8567 Japan
Note: [] Corresponding author. Tel.: +81 268 21 5531; Fax: +81 268 21 5511; E‐mail: yamaura@ke.shinshu‐u.ac.jp.
Abstract: In order to prepare ecologically and biologically safety physical cross‐linked hydrogel of a‐PVA/NaCl/H2O system, we prepared blend hydrogel of natural polymeric binders like gelatin and starch in above system, and effect of these binder additives were evaluated on terbutaline release kinetics. Terbutaline (1%) hydrogels of a‐PVA(7%)/NaCl(11%)/H2O and a‐PVA(7%)/H2O system (Cyclic FT process) were prepared along with various concentrations of gelatin and soluble starch by feed‐mixture dissolving method. In case of a‐PVA/NaCl/H2O system only one cycle gelation was done at −20°C for 24 h. On the other hand 3 cycles were done by freezing at −30°C for 16 h followed by thawing at room temperature for 8 h. Drug release was done by paddle method (USP type II) with a rotation of 50 rpm at 37°C in distilled water. Swelling of the gel was done at 37°C for 45 h and melting temperatures of the gel were also studied using the upside‐down test tube method. Comparatively lower values of release rate, diffusion coefficient and kinetic constant were found from the blend hydrogel of a‐PVA/starch/NaCl/H2O system. When % cumulative release was plotted vs. square root of time it showed straight lines, which indicated Higuchi Matrix Dissolution Model. Inclusion of starch binder increased the degree of swelling compared with that of gelatin. 15 h was found as equilibrium swelling time. A Fickian swelling of this blend hydrogel system indicated the swelling controlled Fickian diffusion type of drug release. Melting temperatures of the blend hydrogels were characteristically higher (94–95°C) than that of cyclic FT (72–76°C), resulting a thermostable hydrogel for biological system. SEM morphological studies of gel surface indicated the well‐developed interpenetrating macromolecular network structure like fish net in starch blend gel prevails over other hydrogel studied here. Gelatin has got characteristic tunnel (200 μm in diameter) inside the macromolecular network that contributes this system higher release kinetics than that of starch.
Keywords: Blend hydrogel, natural binder, polyvinyl alcohol, terbutaline sulfate, Fickian diffusion, sustained release
Journal: Bio-Medical Materials and Engineering, vol. 14, no. 4, pp. 371-382, 2004
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl