Affiliations: [a] Department of Electrical and Computational Engineer, Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez, Ciudad Juárez, Mexico | [b] Universidad Tecnologica de Mexico (UNITEC), Ciudad de México, Mexico | [c] Tecnológico de Monterrey, Monterrey, Mexico
Correspondence:
[*]
Corresponding author: Odin Ramírez-Fernandez, Universidad Tecnologica de Mexico (UNITEC), Mexico Campus en Linea, Av. Marina Nacional No. 162, Col. Anáhuac, Ciudad de México, CP 11320, Mexico. E-mail: odinramirezfernandez@gmail.com
Abstract: BACKGROUND:Tissue engineering seeks to improve, maintain, or replace the biological functions of damaged organs or tissues with biological substitutes such as the development of scaffolds. In the case of bone tissue, they must have excellent mechanical properties like native bone. OBJECTIVE:In this work, three geometric models were designed for scaffolds with different structure lattices and porosity that could be biomechanically suitable and support cell growth for trabecular bone replacement applications in tissue engineering and regenerative medicine to the proximal femur area. METHODS:Geometries were designed using computer-aided design (CAD) software and evaluated using finite element analysis in compression tests. Three loads were considered according to the daily activity: 1177 N for slow walking, 2060 N for fast walking, and 245.25 N for a person in a bipedal position. All these loads for an adult weight of 75 kg. For each of them, three biomaterials were assigned: two polymers (poly-glycolic acid (PGA) and poly-lactic acid (PLA)) and one mineral (hydroxyapatite (HA)). 54 tests were performed: 27 for each of the tests. RESULTS:The results showed Young’s modulus (E) between 1 and 4 GPa. CONCLUSION:If the resultant E is in the range of 0.1 to 5 GPa, the biomaterial is considered an appropriate alternative for the trabecular bone which is the main component of the proximal bone. However, for the models applied in this study, the best option is the poly-lactic acid which will allow absorbing the acting loads.
