Affiliations: Center of Biomechanics, Chongqing University, Chongqing, China
Note: [] Requests for reprints should be addressed to Mr. Chunyun Jian, c/o Dr. A. Toshimitsu Yokobori, Jr., Department of Mech. Engineering II, Tohoku University, Aoba, Aoba-ku, Sendai, #980, Japan.
Abstract: Diseases of the bile duct system in the digestive system after surgery are common. In order to clarify the cause of these diseases, research on the diseases from a biomechanical perspective is increasing; however, the same cannot be said of biochemical research. In this paper, by using a new, well-devised testing apparatus, specimens extracted from the bile duct system of canine body are tested. The test data are analyzed using the finite deformation theory, and mechanical properties of the bile duct system outside the liver are investigated. The conclusions show that the viscoelasticity of the bile duct system is very small. In its normal physiological condition, the bile duct wall has an almost uniform distribution of circumferential and longitudinal stress. However, when the diseases of the bile duct system cause high pressure at the bile duct, the circumferential stress and longitudinal stress at the bile inside wall suddenly increase and are much larger than those stresses at the outside wall. The elastic modulus gradually becomes small from the common bile duct and the common hepatic duct to hepatic duct, and the value of elastic modulus for the cystic duct is almost equal to that of the hepatic duct.
Keywords: bile duct system outside the liver, common bile duct, cystic duct, common hepatic duct, hepatic duct, stress distribution, finite deformation theory, incremental elasticity
