Technology and Health Care - Volume 31, issue 1

Authors: Badnjevic, Almir | Deumic, Amar | Smajlhodzic-Deljo, Merima | Pokvic, Lejla Gurbeta

Article Type: Other

Abstract: BACKGROUND: Introduction of fluids, medicaments and nutrients into the human body during hospitalization is fundamental for treatment and healing of patients. Fluids are introduced by means of infusion pumps while nutrients and medicaments are introduced by perfusion pumps. It is of vital importance for these devices to deliver exact amounts of the aforementioned substances as significant deviations can result in severe patient harm. Therefore it is important to effectively monitor their performance and prevent failures. OBJECTIVE: This paper proposes a novel method for conformity assessment testing of infusion and perfusion pumps for post-market surveillance purposes. …METHOD: The method was developed on the basis of metrology characteristics of the devices. In addition to the evaluation of essential safety and visual integrity of infusion and perfusion pumps, their performance in terms of delivered volumes was assessed and monitored. RESULTS: The developed method was validated between 2018 and 2021 in healthcare institutions of all levels. The results obtained during validation suggest that conformity assessment testing of infusion and perfusion pumps as a method used during PMS contributes to significant improvement in devices’ accuracy and reliability. CONCLUSION: A standardized approach in conformity assessment testing of infusion and perfusion pumps during PMS, besides increasing reliability of the devices, is the first step in digital transformation of management of these devices in healthcare institutions opening possibility for use of artificial intelligence. Show more

Keywords: Medical device, performance, infusion pumps, perfusion pumps, testing, standardisation, post-market surveillance

DOI: 10.3233/THC-229010

Citation: Technology and Health Care, vol. 31, no. 1, pp. 347-355, 2023

Authors: Badnjevic, Almir | Deumic, Amar | Biskovic, Dusanka | Pokvic, Lejla Gurbeta

Article Type: Other

Abstract: BACKGROUND: Dialysis machines are used regularly in healthcare practice. They are classified as a type of medical device with moderate and high risk therefore significant requirements are placed on their safety and performance every time they are used on patients. The new Medical Device Regulation (MDR) defines medical device post-market surveillance (PMS) as performed by independent, third-party, notified bodies more strategically in hope to improve traceability of device performance. However, there is still an apparent gap in terms of standardised conformity assessment testing methods. OBJECTIVE: This paper proposes a novel evidence-based method for conformity assessment testing …of dialysis machines for post-market surveillance purposes. METHOD: The novel method is developed according to the International Organisation of Legal Metrology (OIML) guidelines and is to be used for the purpose of conformity assessment testing of Dialysis machines with respect to their metrological characteristics during PMS. RESULTS: The developed method was validated between 2018 and 2021 in healthcare institutions of all levels. The results obtained during validation suggest that conformity assessment testing of dialysis machines as a method used during PMS contributes to significant improvement in devices’ accuracy and reliability. CONCLUSION: A standardized approach in conformity assessment testing of dialysis machines during PMS, besides increasing reliability of the devices, is the first step in digital transformation of management of these devices in healthcare institutions opening possibility for use of artificial intelligence. Show more

Keywords: Medical device, dialysis machines performance, testing, standardisation, post-market surveillance

DOI: 10.3233/THC-229011

Citation: Technology and Health Care, vol. 31, no. 1, pp. 357-365, 2023

Authors: Badnjevic, Almir | Deumic, Amar | Trakic, Ammar | Pokvic, Lejla Gurbeta

Article Type: Other

Abstract: BACKGROUND: Mechanical ventilators are medical devices used in intensive care units when patients are in need of mechanical aid to facilitate the process of breathing. As the function of breathing is the exchange of gases, the mechanical ventilator takes over that function while the patient is incapable to spontaneous breathing. As these devices are used to maintain the life of patents, their performance must be ensured and there cannot be significant deviations in the volumes and pressure of gases they introduce to the patient. The new Medical Device Regulation (MDR) defines medical device post-market surveillance (PMS) as performed by …independent, third-party, notified bodies more strategically in hope to improve traceability of device performance. However, there is still an apparent gap in terms of standardised conformity assessment testing methods. OBJECTIVE: This paper proposes a novel method for conformity assessment testing of mechanical ventilators for post-market surveillance purposes. METHOD: The method was developed on the basis of metrology characteristics of mechanical ventilators and evaluation of their vital safety and performance parameters. In addition to the evaluation of essential safety and visual integrity of mechanical ventilators, their performance in terms of volume of oxygen delivered to the patient as well as the flow and pressure of the delivered gas is evaluated. RESULTS: The developed method was validated between 2018 and 2021 in healthcare institutions of all levels. The results obtained during validation suggest that conformity assessment testing of mechanical ventilators as a method used during PMS contributes to significant improvement in devices’ accuracy and reliability. CONCLUSION: A standardized approach in conformity assessment testing of mechanical ventilators during PMS, besides increasing reliability of the devices, is the first step in digital transformation of management of these devices in healthcare institutions opening possibility for use of artificial intelligence. Show more

Keywords: Medical device, performance, mechanical ventilator, testing, standardisation, post-market surveillance

DOI: 10.3233/THC-229012

Citation: Technology and Health Care, vol. 31, no. 1, pp. 367-376, 2023

Authors: Badnjevic, Almir | Deumic, Amar | Dzemic, Zijad | Pokvic, Lejla Gurbeta

Article Type: Other

Abstract: BACKGROUND: Anaesthesia machines, as moderate to high-risk medical devices intended for use on patients during surgical procedures must be safe and reliable with traceable performance every time they are used in healthcare practice. The new Medical Device Regulation (MDR) defines medical device post-market surveillance (PMS) as performed by independent, third-party, notified bodies more strategically in hope to improve traceability of device performance. However, there is still an apparent gap in terms of standardised conformity assessment testing methods. OBJECTIVE: This paper proposes a novel evidence-based method for conformity assessment testing of anaesthesia machines for post-market surveillance purposes. …METHOD: The novel method is developed according to the International Organisation of Legal Metrology (OIML) guidelines and is to be used for the purpose of conformity assessment testing of anaesthesia machines with respect to their technical and metrological characteristics during PMS. RESULTS: The developed method was validated between 2018 and 2021 in healthcare institutions of all levels. The results obtained during validation suggest that conformity assessment testing of anaesthesia machines as a method used during PMS contributes to significant improvement in devices’ accuracy and reliability. CONCLUSION: A standardized approach in conformity assessment testing of anaesthesia machines during PMS, besides increasing reliability of the devices, is the first step in digital transformation of management of these devices in healthcare institutions opening possibility for use of artificial intelligence. Show more

Keywords: Medical device, anaesthesia machine, performance, testing, standardisation, post-market surveillance

DOI: 10.3233/THC-229013

Citation: Technology and Health Care, vol. 31, no. 1, pp. 377-387, 2023

Authors: Badnjevic, Almir | Spahic, Lemana | Jordamovic, Naida Babic | Pokvic, Lejla Gurbeta

Article Type: Other

Abstract: BACKGROUND: Premature born infants or infants born sick require immediate medical attention and decreasing the stress imposed onto their body by the environment. Infant incubators provide an enclosed environment that can be controlled to fit the needs of the infant. As such, their performance must be consistent and without significant deviations. The only manner to ensure this is by post-market surveillance (PMS) focused on evaluation of both safety and performance. The new Medical Device Regulation (MDR) defines medical device post-market surveillance (PMS) as performed by independent, third-party, notified bodies more strategically in hope to improve traceability of device performance. …However, there is still an apparent gap in terms of standardised conformity assessment testing methods. OBJECTIVE: This paper proposes a novel method for conformity assessment testing of infant incubators for post-market surveillance purposes. METHOD: The method was developed based on guidelines for devices providing measurements laid out by the International Organisation of Legal Metrology (OIML). The methodology was validated during a four year period in healthcare institutions of all levels. RESULTS: The developed method was validated between 2018 and 2021 in healthcare institutions of all levels. The results obtained during validation suggest that conformity assessment testing of infant incubators as a method used during PMS contributes to significant improvement in devices’ accuracy and reliability. CONCLUSION: A standardized approach in conformity assessment testing of infant incubators during PMS, besides increasing reliability of the devices, is the first step in digital transformation of management of these devices in healthcare institutions opening possibility for use of artificial intelligence. Show more

Keywords: Medical device, performance, infant incubators, testing, standardisation, post-market surveillance

DOI: 10.3233/THC-229014

Citation: Technology and Health Care, vol. 31, no. 1, pp. 389-399, 2023