Journal of Aerospace Operations - Volume 3, issue 3-4

Authors: Cha, Jianzhong | Stjepandić, Josip

Article Type: Editorial

DOI: 10.3233/AOP-150047

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 121-124, 2015

Authors: Zeuschner, Marcus | Mo, John P.T.

Article Type: Research Article

Abstract: The Product Service System (PSS) is a new business concept that aims to integrate all phases of the life cycle of complex engineering products from acquisition through sustainment to disposal. However, the PSS design has imposed significant risks to the manufacturer not only in the manufacture of the product itself, but also in the provision of support services over long periods of time at a pre-determined price. It is imperative that servitization transformations are linked to people’s expectations and the acknowledgement that no two service experiences or pathways to service are the same. Research of High Reliability Organizations (HROs) has …shown that HROs have the required characteristics that can be applied to PSS design to overcome these issues. This paper explores correlations between HRO causal factors and PSS requisite capabilities along with service business model to define a new high reliability service dominant product service system. Show more

Keywords: High reliability Organization, product service systems, servitization, transformation, sustainment

DOI: 10.3233/AOP-150049

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 125-146, 2015

Authors: Figay, N. | Ghodous, P. | Abdul Ghafour, S. | Ferreira Da Silva, C. | Exposito, E.

Article Type: Research Article

Abstract: Today, in order to confront the growing complexity of products and organisations, Aeronautic, Space and Defence (ASD) manufacturing enterprises are using more and more System Engineering, Product Lifecycle Management and Computer Aided Solutions for various engineering and management activities. Combined with a more and more important outsourcing, such trends led to the emergence of what is called Dynamic Manufacturing Networks (DMN). These DMNs are facing important difficulties for the establishment of PLM interoperability based on legacy PLM standards for Manufactured Product and Process data exchange, sharing and long term archiving. To address such issues, Airbus Group Innovations (AGI) has been …developing a Federative Interoperability Framework (FIF) through iterations between research, operational and standardisation projects. FIF defines interoperability principles, brakes and enablers. Based on an analysis of DMN interoperability brakes and enablers, this paper proposes a new way based on FIF interoperability principles for dealing with pragmatic interoperability of PLM processes within the ASD digital business ecosystem. We propose a DMN interoperability conceptual framework, coupled with an experimental collaborative open platform (cPlatform), to achieve pragmatic PLM process interoperability. For this, we rely on DMN blueprint of PLM Business Processes developed within the frame of the IMAGINE project. The proposed approach is then assessed according to scientific, business and standardisation viewpoints. Show more

Keywords: Interoperability, Dynamic Manufacturing Network, Product Lifecycle Management, open standards, model based enterprise platform engineering

DOI: 10.3233/AOP-150050

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 147-166, 2015

Authors: Stolt, Roland | André, Samuel | Elgh, Fredrik | Johansson, Joel | Poorkyani, Morteza

Article Type: Research Article

Abstract: In this paper interviews with staff involved in product development from four different companies is presented. The objective is to find out how the companies manage the technical risk of introducing new technology in products and how they prepare for meeting changing requirements from customers. The companies originates from aerospace, automotive and production engineering. Based on the results of the first study, a case study was carried out at the aerospace company. The studies shows that, the introduction of new technology varies with the risk of failure in the validation of the products. Companies that easily can revert back to …the former technology is more risk taking. The types of products and the companies’ place in the supply chain has an impact on technology introduction and requirements handling. The companies have strategies for developing requirement specifications prior to the start of the project. This is most elaborate at the aerospace company where a thorough concept evaluation clarify possible variations in requirements. Show more

Keywords: Product, technology, development, platform, complexity

DOI: 10.3233/AOP-150048

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 167-184, 2015

Authors: Emmer, Christian | Fröhlich, Arnulf | Jäkel, Volker | Stjepandić, Josip

Article Type: Research Article

Abstract: Adopting the mechatronics as contemporary most emerging engineering discipline the integration of mechanical and electrical CAD (MCAD/ECAD) systems remains a big challenge in concurrent engineering because their data models and functionality have been developed continuously further apart. Market research confirms that an integrated tool chain for ECAD and MCAD design is prerequisite for a better mechatronic development process. This paper presents the overview of various integration approaches with different degree of maturity and describes the concept of deep integration for mechatronic products conducted by ProSTEP iViP Association which combines existing standards in engineering collaboration context. Version 3 of the current …ProSTEP iViP Recommendation PSI 5 entitled “ECAD/MCAD-Collaboration” provides a comprehensive specification for collaboration between the ECAD and MCAD worlds. A considerable number of vendors have now implemented the underlying data schema and integrated it in the corresponding products. As a result, users can now choose the solutions that best meet their particular needs from an increasingly wide range of efficient systems for collaborative product development within the ECAD and MCAD fields. Show more

Keywords: Mechatronics, mechanical CAD, electrical CAD, integration, collaboration

DOI: 10.3233/AOP-150051

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 185-201, 2015

Authors: Raudberget, Dag | Levandowski, Christoffer | Isaksson, Ola | Kipouros, Timoleon | Johannesson, Hans | Clarkson, John

Article Type: Research Article

Abstract: The establishment of a platform architecture is a critical task but there is no methodological support for this in the first phases of development. There are several approaches for evaluating designs and architectures when an initial design is present, however, not for the phases foregoing the embodiment of ideas into concepts. This paper fills this void by introducing a new design methodology for modelling, assessing and narrowing down the architectural design space. It allows exploration of more alternatives in the earliest phases of development, which ultimately may produce better designs. The result is a design space of a manageable and …desirable size for subsequent embodiment and detailed design with traditional engineering tools. The advantage is that feasibility of the candidate platforms have been established to a high degree of certainty. The approach is illustrated with a case of redesign showing how a manufacturer of parts for a jet engine can use the methodology to model and assess platform concepts in the earliest phase of development. Show more

Keywords: Product platforms, set-based concurrent engineering, functional modelling, change propagation, systems engineering, Pre-embodiment, thermal aircraft design

DOI: 10.3233/AOP-150052

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 203-221, 2015

Article Type: Other

Citation: Journal of Aerospace Operations, vol. 3, no. 3-4, pp. 223-223, 2015