Affiliations: Department of Biomechanical Engineering, Vilnius Gediminas Technical University, Vilnius, Lithuania
Correspondence:
[*]
Corresponding author: Arnas Martinaitis, Department of Biomechanical Engineering, Vilnius Gediminas Technical University, J. Basanavičius str. 28, MR-II 2-109, 03224 Vilnius, Lithuania. E-mail: arnas.martinaitis@stud.vgtu.lt.
Abstract: BACKGROUND: Long sitting causes many health problems for people. Healthy sitting monitoring systems, like real-time pressure distribution measuring, is in high demand and many methods of posture recognition were developed. Such systems are usually expensive and hardly available for the regular user. OBJECTIVE: The aim of study is to develop low cost but sensitive enough pressure sensors and posture monitoring system. METHODS: New self-made pressure sensors have been developed and tested, and prototype of pressure distribution measuring system was designed. RESULTS: Sensors measured at average noise amplitude of a = 56 mV (1.12%), average variation in sequential measurements of the same sensor s = 17 mV (0.34%). Signal variability between sensors averaged at 100 mV (2.0%). Weight to signal dependency graph was measured and hysteresis calculated. Results suggested the use of total sixteen sensors for posture monitoring system with accuracy of < 1.5% after relaxation and repeatability of around 2%. CONCLUSION: Results demonstrate that hand-made sensor sensitivity and repeatability are acceptable for posture monitoring, and it is possible to build low cost pressure distribution measurement system with graphical visualization without expensive equipment or complicated software.
