Affiliations: [a] Department of Anatomy, the Royal College of Surgeons in Ireland, Dublin, Ireland | [b] Trinity Centre for Bioengineering, Trinity College Dublin, Ireland | [x] Mechanical Engineering Faculty, Laboratory for Materials Technology, University of Applied Science, Regensburg, Germany | [y] University Clinic, Department of Traumatology, Regensburg, Germany
Correspondence:
[*]
Address for correspondence: Jan Geert Hazenberg, Royal College of Surgeons in Ireland, 123 St Stephens Green, Dublin 2, Ireland. Tel.: +353 1 4022147; Fax: +353 1 4022355; E-mail: jhazenberg@rcsi.ie.
Abstract: It is well known for almost half a century that bones contain microcracks. Very little is known about the crack growth behaviour of very small cracks, e.g. the stage before they become macroscopically long. The aim of this work was to investigate the dynamic crack growth behaviour of sub-millimetre microcracks in cortical bone. It was found that slow stable crack growth occurs in specimens subjected to static loading conditions. Crack growth direction was dominated by the local fibre orientation of the bones. Crack angles varied between 10 and 36 degrees of the long axis of the bone. Short cracks were found to show periods of rapid growth followed by intervals of temporary crack arrest. Histological analysis showed that crack arrest occurred due to vascular canals in the bone. During these periods of crack arrest, crack opening displacements increased until the local strain was sufficient to overcome these features. These observations indicate a mechanism for growth of small cracks in bone at constant stress, involving microstructural barriers, time-dependent deformation of material near the crack tip and strain-controlled propagation.
