Sound power estimation by laser Doppler vibration measurement techniques

Article type: Research Article

Authors: Revel, G.M.^; | Rossi, G.L.

Affiliations: Dipartimento di Meccanica, Università degli Studi di Ancona, I‐60131 Ancona, Italy

Note: [] Corresponding author: Dr. Gian Marco Revel, Dipartimento di Meccanica, Università degli Studi di Ancona, Via Brecce Bianche, I‐60131 Ancona, Italy, Tel.: +39 71 2204441; Fax: +39 71 2204801; E‐mail: revel@ mehp1.cineca.it.

Abstract: The aim of this paper is to propose simple and quick methods for the determination of the sound power emitted by a vibrating surface, by using non‐contact vibration measurement techniques. In order to calculate the acoustic power by vibration data processing, two different approaches are presented. The first is based on the method proposed in the Standard ISO/TR 7849, while the second is based on the superposition theorem. A laser‐Doppler scanning vibrometer has been employed for vibration measurements. Laser techniques open up new possibilities in this field because of their high spatial resolution and their non‐intrusivity. The technique has been applied here to estimate the acoustic power emitted by a loudspeaker diaphragm. Results have been compared with those from a commercial Boundary Element Method (BEM) software and experimentally validated by acoustic intensity measurements. Predicted and experimental results seem to be in agreement (differences lower than 1 dB) thus showing that the proposed techniques can be employed as rapid solutions for many practical and industrial applications. Uncertainty sources are addressed and their effect is discussed.

Journal: Shock and Vibration, vol. 5, no. 5-6, pp. 297-305, 1998