Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Huang, Qingyua; * | Zhong, Yib | Wang, Wenyac
Affiliations: [a] College of Intelligent Manufacturing and Automobile, Chengdu Vocational and Technical College of Industry, Chengdu, Sichuan, China | [b] Electrical Automation, Chengdu Tiancheng Hengxin Technology Co., Ltd., Chengdu, Sichuan, China | [c] Engineering College, Chengdu College of University of Electronic Science and Technology of China, Chengdu, Sichuan, China
Correspondence: [*] Corresponding author: Qingyu Huang, College of Intelligent Manufacturing and Automobile, Chengdu Vocational and Technical College of Industry, Chengdu 610000, Sichuan, China. E-mail: Huangqingyu0726@163.com.
Abstract: 3D printing technology is a popular new technology that combines information technology with mechanical engineering and material science, and is being widely used in various fields. From the computer point of view, the basic technology of 3D printing is to slice and scan each part of the 3D model. The slicing algorithm used directly affects the speed of slicing and the effect of post-printing, and the result of slicing needs to be optimized. This paper analyzes the slicing algorithm and partition scanning strategy related technologies of 3D printing models and solves the practical problems of models in the 3D printing process. This paper first studies the slicing algorithm in the 3D printing process, then obtains and intercepts the cross-sectional contour, and finally performs mosaic and partition scanning on the sliced polygon, and uses experiments to verify the effectiveness of the research. The experimental results show that compared with other 3D printing methods, the printing method in this paper reduces the slicing time by 23.61%, and the fitting error range and the fluctuation range of the residual height of the fusion volume are smaller.
Keywords: Partition scanning, slicing algorithm, 3D printing, big data
DOI: 10.3233/IDT-230247
Journal: Intelligent Decision Technologies, vol. 18, no. 2, pp. 731-741, 2024
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl