Affiliations: [a] Federal University of Itajubá, Itajubá, Brazil
| [b] University Center of Itajubá, Itajubá, Brazil
Correspondence:
[*]
Address for correspondence: Melina Espanhol Soares, Federal University of Itajubá, Av. BPS, 1303, 37500-901, Itajubá, Brazil. E-mail: melespanhol@yahoo.com.br.
Abstract: BACKGROUND:The aim of this study was to characterize solid particulate aerosol derived from a cutlery microenterprise and to investigate substances associated with activities performed within the work environment. OBJECTIVE:Suspended particulate matter (SPM) was collected at different locations in the cutlery workshop and near machines used by workers, using passive sampling devices fitted with polytetrafluoroethylene filters, onto which total particulate material was deposited. The substances present in the SPM were analyzed using gas chromatography-mass spectrometry (GC-MS). RESULTS:Identification of the substances was performed using the National Institute of Standards (NIST) library and automated mass spectral deconvolution and identification system. (AMDIS) software, considering at least 70% probability. The concentration of total dust, obtained using a gravimetric method, was approximately 1 mg.m–3. CONCLUSION:The toxic substances found in the SPM included halogenated hydrocarbons (containing chlorine, fluorine, and iodine) and aromatic hydrocarbons. The toxic substances included naphthalene, which is classified as carcinogenic.
