Affiliations: [a] Information Engineering College, Jiangxi Modern Polytechnic College, Nanchang 330029, China | [b] Department of Engineering and Architecture, University of Parma, Parma 43124, Italy
Abstract: With the wide application of industrial Internet of Things, the increasing amount of data and the complexity of data types, higher requirements are put forward for the performance of data acquisition gateway. In order to reduce the data acquisition time of the gateway and improve the data retrieval coverage of the gateway, a novel design method of composite data acquisition gateway based on 5G network is proposed. Based on the analysis of related technologies, the functional requirements of the composite data acquisition gateway are summarized, and the overall design of the gateway is completed. On this basis, the gateway hardware environment is constructed by designing the main control module, 5G module and FPGA program, and then the software program is designed by designing the data acquisition driver, 5G module driver, embedded software and protocol conversion process. The experimental results show that the data retrieval coverage of the gateway designed by this method is always above 92%, which is 6% higher than that of method 1. This shows that the method significantly improves the coverage of data search, speeds up the efficiency of data collection, and improves the performance of the data collection gateway, which proves the effectiveness and feasibility of the method and is conducive to promoting the intelligent development of the data collection gateway technology.
Keywords: 5G network, compound gateway, data acquisition, protocol conversion
