Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Karimi, Alirezaa; * | Razaghi, Rezab
Affiliations: [a] Department of Mechanical Engineering, Kyushu University, Fukuoka 819-0395, Japan | [b] Basir Eye Health Research Center, Tehran, Iran
Correspondence: [*] Corresponding author: Alireza Karimi, Department of Mechanical Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan. Tel.: +81 92 802 3237; Fax: +81 92 802 0001; E-mail: karimi@kyudai.jp.
Abstract: The mechanical functions of the lungs are concerned with ventilating the alveoli and aiding venous return to the heart. The mechanical properties of the lung allow this to be fulfilled with a very small expenditure of energy. Smoking via chronic obstructive pulmonary disease (COPD) can affect this mechanical function through the alteration of the mechanical properties of the lung tissue. So far, no study has been conducted to experimentally compare the in vitro mechanical properties of the human lung tissue among the healthy nonsmokers and unhealthy smokers. Therefore, there is a paucity of knowledge on how the macro-mechanical properties of the lung tissue as a consequence of at least 7 years of smoking can alter. This study was, hence, aimed at performing a comparative study to compare the linear elastic and nonlinear hyperelastic mechanical properties of the healthy nonsmokers and unhealthy smokers’ lung using uniaxial tensile testing under two different loading directions, i.e., the axial and transversal. To do that, the COppm (Carbon Monoxide part per million) and %COHb (blood Carboxyhemoglobin) of 18 cadaveric individuals, including 9 nonsmokers and 9 smokers were measured. The COppm and %COHb were found to be 26 ± 1.58 (Mean ± SD) and 4 ± 1.16 for the smokers and 4.79 ± 0.25 and 1.27 ± 0.16 for the nonsmokers, respectively. The lung tissues were excised from the cadavers and mounted on the uniaxial tensile test machine under the loading rate of 5 mm/min. The stress-strain data of the tissues revealed the axial elastic modulus of 58 ± 4.21 and 142 ± 8.84 kPa for the nonsmokers and smokers’ lungs, respectively. Similarly, the transversal elastic modulus of 53 ± 7.16 and 127 ± 11.15 kPa were found for the nonsmokers and smokers’ lungs, respectively. The results revealed a significant difference between the axial and transversal mechanical properties of the nonsmokers and smokers’ lung tissues (p< 0.05, post hoc Scheffe method). The hyperelastic material coefficients of the lung tissues were also calculated and reported. These findings have implications not only for understanding the role of smoking on the mechanical properties of the lung tissue but also to give rise to novel therapeutic strategies for the management of the disease and prevention of smoking addiction.
Keywords: Lung, smoking, axial and transversal loadings, mechanical properties, elastic modulus, toughness, hyperelastic
DOI: 10.3233/THC-181340
Journal: Technology and Health Care, vol. 26, no. 6, pp. 963-972, 2018
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl