Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Fang, Juana; b | Vuckovic, Aleksandrab | Galen, Sujayc; d | Cossar, Calume | Conway, Bernard A.c | Hunt, Kenneth J.a; *
Affiliations: [a] Institute for Rehabilitation and Performance Technology, Division of Mechanical Engineering, Department of Engineering and Information Technology, Bern University of Applied Sciences, Burgdorf, Switzerland | [b] Centre for Rehabilitation Engineering, School of Engineering, University of Glasgow, Glasgow, UK | [c] Biomedical Engineering, University of Strathclyde, Glasgow, UK | [d] Physical Therapy Program, Wayne State University, Michigan, MI, USA | [e] School of Engineering, University of Glasgow, Glasgow, UK
Correspondence: [*] Corresponding author: Kenneth J. Hunt, Institute for Rehabilitation and Performance Technology, Division of Mechanical Engineering, Department of Engineering and Information Technology, Bern University of Applied Sciences, 3400 Burgdorf, Switzerland. E-mail: kenneth.hunt@bfh.ch.
Abstract: Background:Rehabilitation of walking should start early after injury to maximise the beneficial effects of gait restoration. Most current gait robotic systems are not suitable for patients who cannot maintain an upright position. Objective:This study aimed to develop a prototype to test a supine-stepping system for early rehabilitation of walking. Methods:Based on the pendulum model of walking, a supine-stepping system was designed through control of the toe and the ankle trajectories. This study implemented the pendulum concept of walking in a functional prototype including a bar-cam mechanism and a foot platform that makes it possible to perform stepping while lying in a supine position. The kinematics of supine stepping produced by the bar-cam prototype were firstly simulated by a corresponding bar-cam model in Matlab/Simmechanics, then investigated through a preliminary test using an empty leg frame, and lastly by tests on three able-bodied subjects. The experimental results from the bar-cam prototype were compared with the computer simulation results. Furthermore, supine stepping of one subject was compared with his performance during overground walking. Results:The lower extremity kinematics produced while performing stepping using the prototype matched the corresponding simulation results as well as the performance during overground walking. Conclusions:This study demonstrated the technical feasibility of implementing the pendulum concept in a gait orthosis for early rehabilitation of walking.
Keywords: Gait robotics, supine stepping, early rehabilitation of walking
DOI: 10.3233/THC-140821
Journal: Technology and Health Care, vol. 22, no. 2, pp. 273-288, 2014
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl