Affiliations: [a] Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, Sultanate of Oman | [b] Department of Mechanical Engineering, College of Engineering, Taibah University, Al Madina Al Munawara, Kingdom of Saudi Arabia | [c] Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, UK
Correspondence:
[*]
Corresponding author: Khurshid Alam, Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khoud 123, Sultanate of Oman. Tel.: +968 24143751; Fax: +968 24141316; E-mail: kalam@squ.edu.om.
Abstract: Background:Bone drilling is a well-known surgical procedure in orthopaedics and dentistry for fracture treatment and reconstruction. Advanced understanding of the mechanics of the drill-bone interaction is necessary to overcome challenges associated with the process and related postoperative complications. Objective:The aim of this study was to explore the benefits of a novel drilling technique, ultrasonically-assisted drilling (UAD), and its possible utilization in orthopaedic surgeries. Methods:The study was performed by conducting experiments to understand the basic mechanics of the drilling process using high speed filming of the drilling zone followed by measurements to quantify thrust force, surface roughness and cracking of the bone near the immediate vicinity of the hole with and without ultrasonic assistance. Results:Compared to the spiral chips produced during conventional drilling (CD), UAD was found to break the chips in small pieces which facilitated their fast evacuation from the cutting region. In UAD, lower drilling force and better surface roughness was measured in drilling in the radial and longitudinal axis of the bone. UAD produced crack-free holes which will enhance postoperative performance of fixative devices anchoring the bone. Conclusions:UAD may be used as a possible substitute for CD in orthopaedic clinics.
