Topology optimization of constrained layer damping on plates using Method of Moving Asymptote (MMA) approach

Issue title: 2nd International Conference on Vibro-Impact Systems (ICoVIS), Sanya, China, 6–9 January, 2010

Article type: Research Article

Authors: Ling, Zheng | Ronglu, Xie | Yi, Wang | El-Sabbagh, Adel

Affiliations: State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, P.R. China | Design and Production Engineering Department, Faculty of Engineering, Ain Shams University, Cairo, Egypt

Note: [] Corresponding author. Tel.: +86 13883973842; E-mail: zling@cqu.edu.cn

Abstract: Damping treatments have been extensively used as a powerful means to damp out structural resonant vibrations. Usually, damping materials are fully covered on the surface of plates. The drawbacks of this conventional treatment are also obvious due to an added mass and excess material consumption. Therefore, it is not always economical and effective from an optimization design view. In this paper, a topology optimization approach is presented to maximize the modal damping ratio of the plate with constrained layer damping treatment. The governing equation of motion of the plate is derived on the basis of energy approach. A finite element model to describe dynamic performances of the plate is developed and used along with an optimization algorithm in order to determine the optimal topologies of constrained layer damping layout on the plate. The damping of visco-elastic layer is modeled by the complex modulus formula. Considering the vibration and energy dissipation mode of the plate with constrained layer damping treatment, damping material density and volume factor are considered as design variable and constraint respectively. Meantime, the modal damping ratio of the plate is assigned as the objective function in the topology optimization approach. The sensitivity of modal damping ratio to design variable is further derived and Method of Moving Asymptote (MMA) is adopted to search the optimized topologies of constrained layer damping layout on the plate. Numerical examples are used to demonstrate the effectiveness of the proposed topology optimization approach. The results show that vibration energy dissipation of the plates can be enhanced by the optimal constrained layer damping layout. This optimal technology can be further extended to vibration attenuation of sandwich cylindrical shells which constitute the major building block of many critical structures such as cabins of aircrafts, hulls of submarines and bodies of rockets and missiles as an invaluable design tool.

Keywords: Topology optimization, sensitivity, Method of Moving Asymptote

DOI: 10.3233/SAV-2010-0583

Journal: Shock and Vibration, vol. 18, no. 1-2, pp. 221-244, 2011