Parametric extraction and internal analysis of fullerene-based polymer bulk heterojunction solar cell

Article type: Research Article

Authors: Chamola, Paritosh | Mittal, Poornima^{; *}

Affiliations: Department of Electronics and Communication Engineering, Delhi Technological University, New Delhi, India

Correspondence: [*] Corresponding author: Poornima Mittal, Department of Electronics and Communication Engineering, Delhi Technological University, New Delhi, 110042, India. E-mail: poornimittal@dtu.ac.in.

Abstract: This paper present device model simulation describing the current-voltage characteristics of polymer/fullerene bulk heterojunction solar cell. In the research paper an organic photovoltaic device with PPV/PCBM [poly (2-methoxy-5-{3’,7’-dimethyloctyloxy}-p-phenylene vinylene) and {6,6}- phenyl C61-butyric acid methyl ester] was simulated via Silvaco TCAD 2-D simulation tool. PCBM acts as acceptor and PPV is donor. The models used to simulate the device were Langevin for recombination, s.binding and a.singlet. Simulation of these type of devices is an vital approach to project and predict the cell performance. Under the illumination of one sun (AM 1.5) the simulated organic cell showed a short circuit current density (JSC) of 28 A/m2, open circuit voltage (VOC) of 0.84 Volt and a fill factor (FF) of 52.51%, the resulting maximum efficiency of the PPV/PCBM organic solar cell is 1.22%.

Keywords: Organic solar cell, open circuit voltage, short circuit current, fill factor

DOI: 10.3233/MGC-220038

Journal: Main Group Chemistry, vol. 22, no. 1, pp. 155-166, 2023