Affiliations: [a] Polymer Engineering Group, Faculty of Technology and Engineering, Golestan University, Gorgan, Iran
| [b]
Radiation Application Research School, Nuclear Science & Technology Research Institute, Tehran, Iran
Correspondence:
[*]
Corresponding author: Saeed Kakaei, Radiation Application Research School, Nuclear Science & Technology Research Institute, P.O. Box 11365-3486, Tehran, Iran. E-mail: Skakaei@aeoi.org.ir.
Abstract: Chelating agents are one of the most important substances in metal extraction, but separation is the main problem in the use of these agents as an adsorbent. After the adsorption of metals by an external magnet, magnetic NPs provide the possibility of easy collecting and isolating the adsorbent nanomaterial for many applications. Given the immense importance of magnetic NPs, there has been widespread interest in accessing the above adsorbent. In the present study, an attempt was made to synthesize acetamido xanthate which was coupled to NPs and has the potential to be used as a nano-adsorbent for the removal of heavy metals. This novel nano sorbent was characterized by scanning electron microscopy (SEM), Fourier transforms infrared (FT-IR), and Nuclear Magnetic Resonance (NMR) spectroscopy. The effect of some parameters such as temperature, time, pH, and the amount of adsorbent on the extraction reaction was investigated. The optimized condition for extraction of cerium was temperature of 30°C, pH = 8, reaction time of 45 minutes using 7.5 mg of the prepared nanosorbent, that in such condition the yield of reaction achieved up to 97%. The prepared adsorbent showed high efficiency in the adsorption of heavy metals specifically.
Keywords: Fe3O4@Acetamidoxanthate, heavy metals, separation, nanosorbent
