Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Schwarzenberger, D. R. | Chetwynd, D. G. | Bowen, D. K.
Affiliations: Centre for Microengineering and Metrology, Department of Engineering, University of Warwick, Coventry CV4 7AL, United Kingdom
Abstract: A phase-step procedure is used with an x-ray interferometer to allow the use of standard phase-plot methods of fringe analysis. When used to measure displacement, this method allows more precise and reliable interpolation of fringe spacings than methods previously reported and is more tolerant of experimental uncertainties. Using the silicon (111) lattice planes as diffracting elements (period 0.3135625 nm), displacement measurements with a standard deviation of 0.003 nm can be routinely achieved. The experimental and data analysis methods required to achieve this resolution are reported.
DOI: 10.3233/XST-1989-1202
Journal: Journal of X-Ray Science and Technology, vol. 1, no. 2, pp. 134-142, 1989
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl