Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Kondrachuk, Alexander V.;
Affiliations: Department of Theoretical Physics, Institute of Physics, National Academy of Sciences of Ukraine, pr.Nauki 46, Kiev, 03028, Ukraine. Tel.: +38 044 265 08 23; Fax: +38 044 265 15 89; E-mail: kondr@kondr.kiev.ua
Note: [*] Parts of the paper were presented at the Twentieth Annual Midwinter Meeting, Association for Research in Otolaryngology, San Petersburg, Florida, USA, (1997) and at the Twelfth Annual Meeting of the American Society for Gravitational and Space Biology, Charlotte, NC, USA (1996)
Abstract: A 3D finite element model (FEM) of the mammalian utricular otolith corresponding to spatial structure, shape and size of the otolith from the guinea pig was developed. The otolithic membrane (OM) was considered as consisting of gel and otoconial layers. The macular surface was approximated as a plane. The deformation of the OM under static loads such as gravity and the change of endolymphatic pressure was analyzed using the FEM for different mechanical parameters of the OM and for different gravity vector orientations. The analytical dependence of OM displacements caused by the acceleration parallel to the macular plane was obtained. By comparison of the results of calculations with the known experimental data Young’s modulus of the gel layer was estimated to be of order of 10 N/m2. It was shown that static loads result in 3D local otolith displacements inhomogeneously distributed along the macular surface and across otolith thickness. Their distribution depends on the geometrical and mechanical parameters of the otolith components. The influences of the finite size of the OM, the Young’s modulus, Poisson’s ratio and thickness of the gel layer on the local displacements distribution of the OM were analyzed. The results of simulation suggest that: a) the Young’s modulus of the thin lowest part of the gel layer adjacent to the macular surface is much smaller than that of the rest of the OM; b) the structure of the border is designed to reduce the spatial inhomogeneity of the gel layer displacement; c) a change of the endolymphatic pressure may result in significant deformation of the OM.
Keywords: finite element modeling, otolith, gravity, endolymphatic pressure
DOI: 10.3233/VES-2001-11103
Journal: Journal of Vestibular Research, vol. 11, no. 1, pp. 13-32, 2001
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl