Affiliations: [a]
Defence Research and Development Organization, Delhi, India
| [b] Deparment of Electrical Engineering, Jamia Millia Islamia University, Delhi, India
Correspondence:
[*]
Corresponding author. Himanshu Chaudhary, Deparment of Electrical Engineering, Jamia Millia Islamia University, Delhi, 110025, India. E-mail: himanshu148035@st.jmi.ac.in.
Abstract: Gimballed sensor system is a precision electromechanical assembly designed primarily to isolate the optical system from disturbances induced by the operating environment. This paper gives an insight to the design and development of gimballed sensor system for Line of Sight (LOS) stabilization of an electro-optical tracking and pointing system. Initially kinematic equations are formulated to establish a relationship between LOS angle and applied torque. This relationship is used to obtain nested loop transfer function model. First, the parameters of the proposed assembly are determined through experimentation & rigorous analysis process, and then conventional control design methodology is adopted for controller configuration design for current and rate loop. The frequency response analysis of the designed LOS stabilization model with conventional controller is done in simulation and the obtained results are verified experimentally against angular disturbances in real time scenario. Further, Based on prior qualitative information about system dynamics and linguistic performance criteria, a fuzzy logic controller of mamdani type with simplified rule set is developed with an objective to improve the disturbance attenuation and command response performance of designed system irrespective of angular disturbances due to platform vibrations, model uncertainties and mass imbalance in gimbal assembly. Both the Fuzzy logic simulation model and conventional model are tested based on critical performance characteristics such as stability of the loop, responsiveness of the loop and insensitivity to disturbances. Finally, the comparative analysis suggests that, although both the control configuration satisfies the required accuracy, Fuzzy logic control certainly improvised the performance of the gimballed sensor system and hence can be very effective for more precise pointing, tracking and stabilization application.
Keywords: Proportional integral (PI) compensation, fuzzy logic control, jitter
attenuation, gimballed electro-optical system, tracking and pointing
