A new mixed-signal CMOS fuzzy logic controller in current mode

Article type: Research Article

Authors: Ghasemzadeh, Mehdi^{; *} | Hadidi, Khayrollah

Affiliations: Microelectronics Research Laboratory of Urmia University, Urmia, Iran

Correspondence: [*] Corresponding author. Mehdi Ghasemzadeh, Microelectronics Research Laboratory, Urmia University, Urmia, Iran. Tel.: +98 914 4393784; Fax: +98 443 3452807; E-mail: m.ghasemzadeh@urmia.ac.ir.

Abstract: In this paper, the design and simulation results of a general-purpose fuzzy logic controller (FLC) with mixed-signal (analog and digital) inputs and digital outputs are presented. Based on a new strategy, it provides simplicity and high speed from the analog prospective and a total digital system advantages with unchanged digital system properties. A novel and reliable structure with respect to other topologies for the fuzzifier section is designed which enhances the accuracy and the velocity. In order to detect minimum and maximum of the input currents at the same time, an inference engine consisting of a min & max circuit is an addition. The benchmark for the defuzzifier in the proposed design is simplicity and through a simple approach, the center of area (COA) is attributed to the defuzzifier. The proposed controller circuit consists of two inputs, sixteen rules and one output designed in 0.35μm CMOS standard technology and simulated with MATLAB systematically. The total controller circuit is simulated with HSPICE simulator (BSIM3v3 parameters) and the layouts were extracted with Cadence Virtuoso v 5.1. The inference speed of the controller is about 41.3 MFLIPS (fuzzy logic inference per second) and power consumption is 3.2 mW.

Keywords: A/D converter, CMOS fuzzy controller, current mode circuits, defuzzifier, fuzzifier, fuzzy logic

DOI: 10.3233/JIFS-191672

Journal: Journal of Intelligent & Fuzzy Systems, vol. 38, no. 4, pp. 5033-5044, 2020