Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Guan, Xina | Guo, Minghuib | Li, Jiqinga | Liu, Xueshena | Zhao, Hea | Lin, Jinguoa; *
Affiliations: [a] College of Material Engineering, Fujian Agriculture and Forestry University, Fuzhou, Fujian, China | [b] Material Science and Engineering College, Northeast Forestry University, Harbin, Heilongjiang, China
Correspondence: [*] Corresponding author: Jinguo Lin, College of Material Engineering, Fujian Agriculture and Forestry University, Shangxiadian Road 15, Cangshan District, Fuzhou 350002, Fujian, China. E-mail:guanxin1001@sina.com
Abstract: As we know, the medium density fiberboard prepared from natural sticky matter which is generated from the lignin activated through laccase-mediator system has been an effective solution to the problem of free formaldehyde in forestry industry. Therefore, based on the premier experiments, this paper has studied the carbon reservation in medium density fiberboard through artificial accelerated aging, and drew the conclusion that the carbon reservation in medium density fiberboard prepared from the wood fiber which is activated through laccase-mediator system is relatively higher than any other board. Furthermore, when the variation during artificial accelerated aging is relatively small, the variation of chromatic value bears evident otherness with control samples. This is because laccase-mediator system has modified some chromophore and auxochrome. Meanwhile, the study found that the lower the carbon reservation, the smaller the initial contact angle, the higher the wettability, and the more perishable the board will be. Nevertheless, the initial contact angle of medium density fiberboard prepared with laccase-mediator system varies little, and begins to stabilize a while after.
Keywords: Laccase-mediator system, medium density fiberboard, carbon reservation, artificial accelerated aging
DOI: 10.3233/JCM-150587
Journal: Journal of Computational Methods in Sciences and Engineering, vol. 15, no. 4, pp. 625-633, 2015
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl