Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Subtitle: Part II. Theory and results of scale model measurements and comparison with published formulae
Article type: Research Article
Authors: van der Linden, C.A.M.
Abstract: A scale model of a crank fixed at one end is loaded by forces and moments at the free end. Measuring of the displacements yields a set of influence numbers. These figures are used for calculation of the axial elasticity of a crankshaft. It is shown that, by means of an extreme simplification, also the elasticity of one single crank can be derived from these influence numbers and that a formula is thus evolved which can be compared with existing formulae. Finally, the results of calculations by means of influence numbers are compared with those according to published formulae.
DOI: 10.3233/ISP-1968-1516303
Journal: International Shipbuilding Progress, vol. 15, no. 163, pp. 96-106, 1968
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl