Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Natarajan, C.a; * | Muthu, S.b | Karuppuswamy, P.a
Affiliations: [a] Department of Mechanical Engineering, Sri Ramakrishna Engineering College, Coimbatore-641022, Tamilnadu, India | [b] Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore-641102, Tamilnadu, India
Correspondence: [*] Corresponding author. Tel.: +91 0422 2460088; Fax: +91 0422 2461089; E-mail: cnat6666@gmail.com
Abstract: It is universally acknowledged that the performance of any machining process is usually evaluated in terms of its productivity and surface quality. Each of these controlling criteria are affected directly and in different way by the tool edge wear, fracture, chatter, surface roughness, cutting force etc., among these responses from machining operation, surface roughness is always considered as one of the most reliable measures for tool wear monitoring and breakage detection. This paper focuses on developing an effective, inexpensive surface recognition system which could be implemented in the modern manufacturing environments. Experiments have been conducted on Aluminium 6061 T6 and for measuring surface roughness based on Design of Experiments (DOE). A statistical multiple regression model has been developed for correlating the values obtained. For the purpose of correlation, DOE software has been used and ANOVA analyses have been carried out to identify the significant factors affecting surface roughness. The experimental values are analyzed in the optimizer technique which uses the Design of Experiment (DOE) principles to generate parameters depending on the surface roughness needed in the manufacturing environment. Thus in case of mass production, time for inspection could be reduced and hence the surface recognition system results in better performance.
Keywords: Surface roughness, CNC turning process, Design of Experiments (DOE), statistical multiple regression analysis, surface recognition system, optimizer technique
DOI: 10.3233/KES-2010-0205
Journal: International Journal of Knowledge-based and Intelligent Engineering Systems, vol. 14, no. 4, pp. 241-256, 2010
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl