Comparison of resistivity measurements on electrical steel plates and strips using the traditional 4-terminal method and the van-der-Pauw (VDP) method

Issue title: 14t⁢h International Workshop on 1&2 Dimensional Magnetic Measurement and Testing (2016)

Guest editors: Zhiguang Cheng, Jianguo Zhu, Yongjian Li and Johannes Sievert

Article type: Research Article

Authors: Hou, Ruifen^{a; *} | Sievert, Johannes^b | He, Jian^a | Lin, Anli^a

Affiliations: [a] National Institute of Metrology, Beijing, China | [b] Physikalich-Technische Bundesanstalt (retired), Braunschweig, Germany

Correspondence: [*] Corresponding author: Ruifen Hou, National Institute of Metrology, Beijing, China. E-mail: hourf@nim.ac.cn.

Abstract: The van-der-Pauw (VDP) method and the traditional measurement method are used to measure the resistivity of the electrical steel plate and strip samples. According to the comparison of the two methods, the relative difference between them is 0.27% for sample of g-o-material and 0.06% for that of n-o-material. The uncertainty of the two methods both are 0.31%. It can be stated that the two methods, the VDP and the traditional method, applied to strip samples, show excellent agreement and should be introduced both in the new edition of the IEC 60404-13 standard.

Keywords: Van-der-Pauw, resistivity, electrical steel, 4-terminal method

DOI: 10.3233/JAE-172264

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 55, no. S1, pp. 113-118, 2017