Using grain oriented electrical steel sheets for electric motor in automotive application: Tooth segmentation

Issue title: Electromagnetic Fields in Mechatronics, Computer Sciences, Electrical and Electronic Engineering

Guest editors: Sławomir Wiak, Paolo Di Barba and Evelina Mognaschi

Article type: Research Article

Authors: Rebhaoui, Abderrahmane^{a; b;} | Randi, Sid Ali^{b; c} | Demian, Cristian^a | Lecointe, Jean-Philippe^a

Affiliations: [a] Laboratoire Systèmes Electrotechniques et Environnement, Université d'Artois (UR 4025), Béthune, France | [b] Institut VEDECOM, Versailles, France | [c] Technocentre RENAULT, Guyancourt, France

Correspondence: [*] Corresponding author: Abderrahmane Rebhaoui, Institut VEDECOM, Versailles 78000, France. E-mail: rebhaouiabderrahmane@gmail.com, abderrahmane.rebhaoui@vedecom.fr

Abstract: Grain Oriented Electrical Steel (GOES) have better performance in terms of permeability and iron losses compared to conventional Fe-Si 3% Non-Oriented Grains Electrical Steel (NOES), particularly when it is magnetized in the rolling direction. This paper presents a concentrated winding radial flux permanent magnets synchronous machine (PMSM) equipped with teeth made of GOES sheet. The goal is to assess the suitability of the use of GOES sheets to improve the efficiency of electric motors. This work is based on the comparison of the performances (Joule losses, iron losses, losses in the permanent magnets and efficiency) of two iso-geometric motors: a reference motor made of NOES sheets and a motor with GOES sheet teeth, at iso-torque and over the operating range (at constant torque and flux weakening). The comparison is made using a finite element software application considering the magnetic anisotropy of the GOES sheets.

Keywords: PMSM, magnetic circuit, anisotropy, grain oriented electric steel, motor performances

DOI: 10.3233/JAE-210186

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 69, no. 2, pp. 221-232, 2022