Affiliations: [a] College of Energy and Electrical Engineering, Hohai University, Nanjing, China
Correspondence:
[*]
Corresponding author: Yujing Guo, College of Energy and Electrical Engineering, Hohai University, No. 8 Focheng west Road, Jiangning District, Nanjing, 211100, China. Tel.: +86 025 58099080; E-mail: yjguo@hhu.edu.cn
Abstract: In this paper, one kind of U-shape permanent magnet embedded salient pole wind generator is proposed. The permanent magnet is divided into three sections to form a U-shaped structure and inserted into the salient pole in the generator. The size of the PM near the side frame is small, therefore, there is sufficient PM location modification space in the salient pole. Some flux-barriers are set in the upper core of the salient pole, which can reduce the q-axis inductance, and ultimately increases the generator maximum output power. To evaluate the generator’s overall performance, some other important electromagnetic parameters such as the air-gap flux density, the output voltage, the cogging torque, the output power, and the demagnetization performance are all calculated and analyzed base on finite element method (FEM). All the above parameters are compared with that of one V-shape permanent magnet embedded salient pole wind generator. The analysis results show that, with the same volume of permanent magnet, the proposed U-shape permanent magnet embedded salient pole wind generator has higher power density than the V-shape permanent magnet embedded salient pole wind generator.
