Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Zhang, Leia | Zhuan, Xiangtaoa;
Affiliations: [a] Department of Automation, School of Electrical Engineering and Automation, Wuhan University, Wuhan, China
Correspondence: [*] Corresponding author: Xiangtao Zhuan, Wuhan University, Wuchang, Wuhan, 430072, China. E-mail: xtzhuan@whu.edu.cn
Note: [ 1 ] The authors are also with Shenzhen Research Institute, Wuhan University, Shenzhen, China. This work was partially supported by Basic Shenzhen Research Institute, Wuhan University, Shenzhen, China Project of the Knowledge Innovation Program in Shenzhen under Grant JCYJ20170818144449801 and the National Natural Science Foundation of China under Grant 61503354.
Abstract: Active electromagnetic isolator systems are used to isolate vibration with variable stiffness and damping, flexible controllability, varied control methods and fast response. In order to achieve better vibration isolation performance, an electromagnetic isolator system is designed with small volume and simple structure and the control block diagram with the nonlinear relationships and PID controller is proposed to simulate and verify in this paper. The structure of the electromagnetic isolator system can not only save space, but also provide the controllable electromagnetic force to counteract external disturbances quickly and actively. For improving the vibration isolation performance of the designed electromagnetic isolator system, a mathematical model which can accurately reflect the relationship between electromagnetic force and coil current and gap is established using structural information and experimental data. A control block diagram of the electromagnetic vibration isolator system containing nonlinear characteristics with PID controller is then designed. The PID control system shows the good performance of active anti-jamming of the designed isolator system. The experimental result demonstrates that the designed electromagnetic isolator system can effectively isolate vibration, and that the control block diagram with PID controller based on the nonlinear system can effectively describe and control the electromagnetic isolator system. The better vibration isolation performance, such as fast response, less overshoot and so on, can be achieved through deliberately designed controllers.
Keywords: Electromagnetic isolator system, vibration control, PID controller, nonlinear system
DOI: 10.3233/JAE-180112
Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 61, no. 3, pp. 329-340, 2019
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl