Magnetic properties of soft magnetic composites under three-dimensional excitations

Issue title: Proceedings of the twelfth International Symposium on Interdisciplinary Electromagnetic, Mechanic and Biomedical Problems, ISEM Bad Gastein

Article type: Research Article

Authors: Lin, Zhi Wei^{a; *} | Zhu, Jian Guo^a | Guo, You Guang^a | Zhong, Jin Jiang^a | Wang, Shuhong^{a; b}

Affiliations: [a] Faculty of Engineering, University of Technology, Sydney, PO Box 123, Broadway, NSW 2007, Australia | [b] Faculty of Electrical Engineering, Xi'an Jiaotong University, 28, West Xian Ning Road, Xi'an, 710049, China

Correspondence: [*] Corresponding author. Tel.: +61 2 9514 2786; Fax: +61 2 9514 2435; E-mail: jacklin@eng.uts.edu.au

Abstract: Soft magnetic composite (SMC) materials are broadly used in low cost high performance electrical machines due to their magnetic isotropy, low eddy current loss, and capability to mould complex shapes. To optimise the performance of electrical machines, the three-dimensional (3-D) magnetic properties must be well understood and accurately modeled. For this purpose, a 3-D magnetic property measurement system was built and special sensing devices were fabricated. This paper presents, in detail, the magnetic flux density loci and the corresponding magnetic field strength loci for an SMC material when the flux density loci were controlled to be circles lying in the xoy-, yoz-, and zox-plane at 50 Hz.

Keywords: 3-D magnetic property, vector hysteresis loci, soft magnetic materials, soft magnetic composites

DOI: 10.3233/JAE-2007-783

Journal: International Journal of Applied Electromagnetics and Mechanics, vol. 25, no. 1-4, pp. 237-241, 2007