Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Papers of the 31st Conference of the German Society for Clinical Microcirculation and Hemorheology, Halle, Germany, 15–16 June 2012
Article type: Research Article
Authors: Krüger, A. | Braune, S. | Kratz, K. | Lendlein, A. | Jung, F.
Affiliations: Center for Biomaterial Development and Berlin-Brandenburg Centre for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr., Teltow, Germany
Note: [] Corresponding author: Prof. Dr. Friedrich Jung, Center for Biomaterial Development and Berlin-Brandenburg Centre for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany. Tel.: +49 03328 352 269; Fax: +49 03328 352 452;E-mail: friedrich.jung@hzg.de
Abstract: Background: The patency of small-diameter vascular prostheses is limited by several factors such as thrombogenicity, which is strongly influenced by surface roughness and chemical composition, or a mechanical mismatch between the elastic modulus of an artery and of the vascular prosthesis. A confluent layer of endothelial cells onto the inner surface of vascular prostheses could improve the hemocompatibility of the device. Biomaterials with adjustable elastic properties could be tailored to the values of human arteries so that a prothesis mismatch could be avoided. It was recently demonstrated that a co-culture of endothelial cells with angiogenically stimulated monocytes (aMO2) shows an accelerated formation of a functional confluent endothelial cell monolayer on soft hydrophobic poly(n-butyl acrylate) (cPnBA) networks. In addition, the cell compatibility with vascular smooth muscle cells and aortic fibroblasts, which are other important cell types of the vessel wall, is essential for a vascular prosthesis material and must therefore be explored. Purpose: Here we investigated the interaction of human vascular smooth muscle cells and aortic fibroblasts with cPnBA04 and cPnBA73. Material and methods: Human primary vascular smooth muscle cells and aortic fibroblasts were seeded on the two cPnBAs with different elastic moduli (cPnBA04 - 250 kPa and cPnBA73 - 1100 kPa) over 72 h. A live-dead staining (fluorescein diacetate/propium iodide) was performed to determine the morphology and viability of adherent cells. Furthermore, the extracellular matrix components, the actin cytoskeleton, the cell-material-contacts and the cytokine profiles were analysed. Results: Both cell types adhered and were viable on cPnBA04 and cPnBA73. The level of pro-inflammatory cytokine secretion (IFN-γ and TNF-α) by smooth muscle cells and vascular fibroblasts was comparable to that of cells cultivated on a control material. The release of these cytokines by human fibroblasts was higher on cPnBA73 compared to cPnBA04. Both cell types secreted an extracellular matrix comparable to cells seeded on a control material. Conclusion: The study revealed, that cPnBA with varying elastic moduli are not only suitable for the cultivation of endothelial cells, but also for human vascular smooth muscle cells and aortic fibroblasts. Therefore, cPnBA could be a potential candidate material for the development of cardiovascular prostheses.
Keywords: Cardiovascular disease, atherosclerosis, polymer-based biomaterial, cPnBA
DOI: 10.3233/CH-2012-1605
Journal: Clinical Hemorheology and Microcirculation, vol. 52, no. 2-4, pp. 283-294, 2012
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl