Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Article type: Research Article
Authors: Fedorova, Mariaa; b; * | Sivaselvan, M.V.b | Kurc, Ozgurc; d | Karakaplan, Alia
Affiliations: [a] LARSA, Inc., Melville, NY, USA | [b] Department of Civil, Structural, and Environmental Engineering, University at Buffalo, Buffalo, NY, USA | [c] LARSA, Ankara, Turkey | [d] Department of Civil Engineering, Middle East Technical University, Ankara, Turkey
Correspondence: [*] Corresponding author. Maria Fedorova, E-mail: mfedorova@larsa4d.com.
Abstract: Rail-structure interaction (RSI) analysis and vehicle-track-structure-interaction (VTSI) analysis are often required during bridge design. For example, the California High-Speed Train Project requires RSI analysis for final design of all structures, as well as VTSI analysis, with the level of interaction to be modeled determined by the complexity of a structure. The goal of RSI analysis is to ensure that superstructure deformations and rail stresses are within acceptable limits. VTSI analysis is a dynamic analysis that takes into account influence of actual trainsets. VTSI Level 1 analysis includes train loads as a series of moving loads. This analysis allows evaluation of dynamic impact effects from trainsets and vertical accelerations of the deck. For complex high-speed railway bridges, VTSI Level 2 might be required, accounting for full dynamic interaction between the trainset and the bridge. To represent this interaction, the trainset is modeled as a multibody system consisting of rigid bodies, springs, and dashpots. The interaction between wheels and rails is accounted for through kinematic constraints and Lagrange multipliers. This paper presents modeling, RSI, and VTSI analyses of a railway bridge in the LARSA 4D software package. The track and superstructure are modeled in an expedited way using a macro that generates the track, approach, and bridge geometries. Fasteners are modeled as hysteretic springs and automatically positioned along the curved geometry of the track using a LARSA 4D’s bridge path coordinate system definition. RSI analysis is performed accounting for temperature differentials between rails and the deck, vertical train loads, acceleration and braking forces. Break in the rail is introduced using stage construction analysis, followed by progressive collapse analysis (with adapting increments and arc-length control) or nonlinear dynamic analysis. Finally, VTSI Level 1 and 2 analyses are performed and the results are compared. Car body accelerations are compared to limit values to ensure passenger comfort.
Keywords: Rail-structure interaction analysis, vehicle-track-structure-interaction analysis, rail break, progressive collapse analysis, impact factor, vehicle response
DOI: 10.3233/BRS-230213
Journal: Bridge Structures, vol. 19, no. 3, pp. 91-101, 2023
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl