An innovative hysteretic damper with adaptive post-elastic stiffness for seismic protection of bridges

Article type: Research Article

Authors: Dicleli, M.^* | Salem Milani, A.

Affiliations: Department of Engineering Sciences, METU, Ankara, Turkey

Correspondence: [*] Corresponding author. M. Dicleli, Department of Engineering Sciences, METU, Ankara, Turkey. Tel.: +90 312 210 4451; Fax: +90 312 210 4462; E-mail: mdicleli@metu.edu.tr.

Abstract: A new hysteretic damper for seismic protection of highway bridges is presented. The Multi-directional Torsional Hysteretic Damper (MTHD) works based on torsional yielding of steel cylindrical cores. The device demonstrates a hyperbolic post-elastic stiffness as a result of its special working mechanism which produces this geometric hardening effect. The post-elastic stiffness was found to be effective in limiting the lateral displacement of the seismic-isolated bridge decks in near-fault. Results of nonlinear time history analyses revealed the adaptive behavior of the device which is a result of this gradual hardening feature, such that at lower displacements in Design-Basis Earthquake (DBE), force levels are close to a regular system while at highest levels of displacements in Maximum Considered Earthquake (MCE), the device hardens to make the substructure yield and limit deck’s displacement.

Keywords: Hysteretic damper, design-basis earthquake, maximum considered earthquake, seismic isolated bridges

DOI: 10.3233/BRS-140074

Journal: Bridge Structures, vol. 11, no. 4, pp. 131-140, 2015