Searching for just a few words should be enough to get started. If you need to make more complex queries, use the tips below to guide you.
Issue title: Frontiers in Biomedical Engineering and Biotechnology – Proceedings of the 2nd International Conference on Biomedical Engineering and Biotechnology, 11–13 October 2013, Wuhan, China
Article type: Research Article
Authors: Sun, Xin; | Li, Ke; | Ren, Hongwei | Li, Peng | Wang, Xinpei | Liu, Changchun;
Affiliations: Department of Medical Metrology, Shandong Institute of Metrology, 28 Qianfoshan East Road, Jinan 250014, P.R. China | Institute of Biomedical Engineering, School of Control Science and Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, P.R. China | Department of Biomedical Engineering, Lerner Research Institute, Cleveland Clinic. 9500 Euclid Avenue / ND20, Cleveland, OH 44195, USA
Note: [] Author for correspondence: Changchun Liu, Institute of Biomedical Engineering, School of Control Science and Engineering, Shandong University, 17923 Jingshi Road, Jinan 250061, P.R. China. Tel.: +86 531 8839 2825; E-mail address: pnjunction@outlook.com
Abstract: The baPWV measurement is a non-invasive and convenient technique in an assessment of arterial stiffness. Despite its widespread application, the influence of different timing algorithms is still unclear. The present study was conducted to investigate the influence of six timing algorithms (MIN, MAX, D1, D2, MDP and INS) on the baPWV measurement and to evaluate the performance of them. Forty-five CAD patients and fifty-five healthy subjects were recruited in this study. A PVR acquisition apparatus was built up for baPWV measurement. The baPWV and other related parameters were calculated separately by the six timing algorithms. The influence and performance of the six algorithms was analyzed. The six timing algorithms generate significantly different baPWV values (left: F=29.036, P<0.001; right: F=40.076, P<0.001). In terms of reproducibility, the MAX has significantly higher CV value (≥ 18.6%) than the other methods, while the INS has the lowest CV value (≤ 2.7%). On the performance of classification, the INS produces the highest AUC values (left: 0.854; right: 0.872). The MIN and D2 also have a passable performance (AUC > 0.8). The choice of timing algorithm affects baPWV values and the quality of measurement. The INS method is recommended for baPWV measurement.
Keywords: Coronary artery disease, arterial stiffness, brachial-ankle pulse wave velocity, timing algorithm
DOI: 10.3233/BME-130806
Journal: Bio-Medical Materials and Engineering, vol. 24, no. 1, pp. 255-261, 2014
IOS Press, Inc.
6751 Tepper Drive
Clifton, VA 20124
USA
Tel: +1 703 830 6300
Fax: +1 703 830 2300
sales@iospress.com
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
IOS Press
Nieuwe Hemweg 6B
1013 BG Amsterdam
The Netherlands
Tel: +31 20 688 3355
Fax: +31 20 687 0091
info@iospress.nl
For editorial issues, permissions, book requests, submissions and proceedings, contact the Amsterdam office info@iospress.nl
Inspirees International (China Office)
Ciyunsi Beili 207(CapitaLand), Bld 1, 7-901
100025, Beijing
China
Free service line: 400 661 8717
Fax: +86 10 8446 7947
china@iospress.cn
For editorial issues, like the status of your submitted paper or proposals, write to editorial@iospress.nl
如果您在出版方面需要帮助或有任何建, 件至: editorial@iospress.nl